2016 HONDA CIVIC COUPE brake

86
uuIndicatorsu
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Brake
Depressing
Indicator*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w *1
, then goes off.
● Blinks when the electric parking
brake switch is pressed without
depressing the brake pedal while
the electric parking brake is in operation.
● Blinks while driving - Press the electric
parking brake switch with the brake pedal
depressed. 2Parking Brake P. 445
—
●
Blinks when the automatic brake
hold button is pressed without
depressing the brake pedal while
the automatic brake hold is in operation.
● Blinks if the automatic brake hold
is automatically canceled while it is in operation. The beeper
sounds.
● Blinks while driving - Press the
automatic brake hold button with the
brake pedal depressed. 2Automatic Brake Hold P. 448
● Immediately depress the brake pedal.
—
Continuously
variable
transmission
models
Manual
transmission
models
Electric Parking Brake System
Automatic Brake Hold System
* Not available on all models
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 86 ページ >0>.>/６年>0月>/>0日　金 曜日　午後４時>/６分

94
uuIndicatorsuDriver Information Interface Warning and Information Messages *
Instrument Panel
MessageConditionExplanation
●
Appears if the automatic br ake hold is automatically
canceled while it is in operation.● Immediately depress the brake pedal.
●
Appears when the automa tic brake hold system is
turned off.
2 Automatic Brake Hold P. 448
●
Appears when the automa tic brake hold button is
pressed without wearing the driver’s seat belt.● Fasten the driver’s seat belt.
2Automatic Brake Hold P. 448
●
Appears when the automa tic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.● Press the automatic brake ho ld button with the brake
pedal depressed. 2Automatic Brake Hold P. 448
●
Appears when the parking brake is applied
automatically while it is in operation.2 Automatic Brake Hold P. 448
2 Parking Brake P. 445
Continuously variable
transmission models
Manual transmission
models
Continuously variable
transmission models
Manual transmission
models
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 94 ページ >0>.>/６年>0月>/>0日　金 曜日　午後４時>/６分

95
uuIndicatorsuDriver Information Interface Warning and Information Messages*
Continued
Instrument Panel
MessageConditionExplanation
●
Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.● Appears while driving - Press the electric parking
brake switch with the brake pedal depressed. 2Parking Brake P. 445
MessageConditionExplanation
●
Appears when you open the driver’s door while the
ignition key is in ACCESSORY
(q .
●
Turn the ignition switch to LOCK (0 , then remove the
key.
● Appears when you open the driver’s door while the
ignition key is in LOCK
(0 .
●
Remove the key from the ignition switch.
Continuously variable
transmission models
Manual transmission
models
Models without smart entry system
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 95 ページ >0>.>/６年>0月>/>0日　金 曜日　午後４時>/６分

97
uuIndicatorsuDriver Information Interface Warning and Information Messages*
Continued
Instrument Panel
MessageConditionExplanation
●
Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(P .
●
Move the shift lever to (P . The power mode changes to
VEHICLE OFF.
● Move the shift lever to
(P , then press the ENGINE
START/STOP button twice.
●
Appears when the power mode is in ACCESSORY.
—
●Appears after the driver’s door is opened when the
power mode is in ACCESSORY.● Press the ENGINE START/STOP button twice with your
foot off the brake pedal to change the power mode to VEHICLE OFF (LOCK).
● Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.● Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
2Smart Entry Remote Reminder P. 146
●
Appears when the smart entry remote battery
becomes weak.● Replace the battery as soon as possible.
2Replacing the Button Battery P. 521
U.S. models
Canadian models
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 97 ページ >0>.>/６年>0月>/>0日　金 曜日　午後４時>/６分

98
uuIndicatorsuDriver Information Interface Warning and Information Messages *
Instrument Panel
MessageConditionExplanation
●
Appears if the smart entry remote battery is too
weak to start the engine or the key is not within
operating range to start the engine.
A beeper sounds six times.●Bring the smart entry remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 538
●
Appears when the starter system has a problem.●As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while pressing
the brake pedal and manua lly start the engine.
Have your vehicle checked by a dealer.
● Appears as soon as a problem is detected in the
smart entry system or pus h button starting system.●
Appears constantly - Have your vehicle checked by a
dealer.
U.S.
Canada
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 98 ページ >0>.>/６年>0月>/>0日　金 曜日　午後４時>/６分

102
uuIndicatorsuDriver Information Interface Warning and Information Messages *
Instrument Panel
MessageConditionExplanation
●
Appears when the parking brake is applied
automatically while ACC wi th LSF is in operation.●
ACC with LSF has been automatically canceled.
2Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) *
P. 410
2 Parking Brake P. 445
●
Appears when pressing the –/SET button while the
parking brake is applied.● ACC with LSF cannot be set.
2Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) *
P. 410
2 Parking Brake P. 445
●
Appears when pressing the –/SET button while the
vehicle is moving and the brake pedal is depressed.● ACC with LSF cannot be set.
2Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) *
P. 410
● Appears if ACC with LSF is canceled while your
vehicle is automatically stopped by ACC with LSF.● Immediately depress the brake pedal.
●Flashes when the system senses a likely collision
with a vehicle in front of you.● Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.) 2Collision Mitigation Braking System TM
(CMBS TM
)*

P. 453
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) *
P. 410
Models with ACC with LSF
* Not available on all models
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 102 ページ >0>.>/６年>0月>/>0日　 金曜日　午後４時>/６分

130
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting
Controls
Customizing the Auto Door Locking/Unlocking Setting
You can customize the auto door locking/unlocking setting to your liking using the master door lock switch.
■ Auto door locking
■ Auto door unlocking
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Default setting
■List of the Auto Door Locking/ Unlocking Customizable Options
ModeDescription
Drive Lock Mode*2Both doors lock when the vehicle’s
speed reaches about 10 mph (15 km/h).
OffThe auto door locking is deactivated all the time.
ModeDescription
Driver's Door Open
Mode*2Both doors unlock when the driver’s door is opened.
Park Unlock Mode
Both doors unlock when the
shift lever is moved into (P with the brake pedal depressed.
OffThe auto door unlocking is deactivated all the time.
Models with
continuously variable
transmission
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 130 ページ >0>.>/６年>0月>/>0日　 金曜日　午後４時>/６分

131
uuLocking and Unlocking the DoorsuCustomizing the Auto Door Locking/Unlocking Setting
Continued
Controls
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Default setting
■Customizing Flow for Auto Door Locking Options
StepsDrive Lock Mode *2Off
1
Apply the parking brake.
Move the shift lever out of
(P
.
Apply the parking brake.
Move the shift lever to
(P.
2Close the driver’s door.Open the driver’s door.
3Turn the ignition switch to ON (w*1
.Turn the ignition switch to ON (w *1
.
4
Press and hold the right side of the master door lock switch on the driver’s door
for more than five seconds. Release th e switch after you hear a click twice.Press and hold the right side of the master door
lock switch on the driver’s door for more than
five seconds. Release the switch after you hear
one click.
5Turn the ignition switch to ACCESSORY (q*1
within 20 seconds.
uCustomization is completed.
Models with continuously variable transmissionModels with continuously variable transmission
16 CIVIC 2D HC２ (０A ０１ ０C)-31TBG6000.book 131 ページ >0>.>/６年>0月>/>0日　 金曜日　午後４時>/６分