Page 355 of 585

uuBluetooth® HandsFreeLink ®uHFL Menus
354
Features
■ To pair a cell phone (when there is no
phone paired to the system)
1. Select Phone .
2. Select Yes.
3. Make sure your phone is in search or
discoverable mode, then select Continue.
uHFL automatically searches for a
Bluetooth® device.
4. Select your phone when it appears on the
list.
uIf your phone does not appear, you can select Refresh to search again.
uIf your phone still does not appear, select
Phone Not Found and search for
Bluetooth ® devices using your phone.
From your phone, search for
HandsFreeLink .
5. The system gives you a pairing code on the
audio/information screen.
uConfirm if the pairing code on the screen
and your phone match.
This may vary by phone.
■Phone Setup1Phone Setup Your Bluetooth -compatible phone must be paired to
the system before you ca n make and receive hands-
free calls.
Phone Pairing Tips: • You cannot pair your phone while the vehicle is
moving.
• Up to six phones can be paired.
• Your phone's battery may dr ain faster when it is
paired to the system.
• If your phone is not ready for pairing or not found
by the system within three minutes, the system will time out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the right side.
These icons indicate the following: : The phone can be used with HFL.
: The phone is compatible with Bluetooth® Audio.
If there is an active connection to Appl e CarPlay or
Android Auto, pairing of additional Bluetooth-
compatible devices is unavailable and Add
Bluetooth Device is grayed out from the Bluetooth
Device List screen.
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 354 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 370 of 585

Continued369
uuBluetooth® HandsFreeLink ®uHFL Menus
Features
■To make a call using redial
1. Go to the Phone menu screen.
2 Phone menu screen P. 352
2. Select Redial .
uDialing starts automatically.
■ To make a call usin g the Call History
Call history is stored by All, Dialed ,
Received , and Missed .
1. Go to the Phone menu screen.
2 Phone menu screen P. 352
2. Select Call History .
3. Select All, Dialed , Received , or Missed .
4. Select a number.
uDialing starts automatically.
■ To make a call usin g a Speed Dial entry
1. Go to the Phone menu screen.
2 Phone menu screen P. 352
2. Select Speed Dial .
3. Select a number.
uDialing starts automatically.
1To make a call using the Call History
The call history displays the last 20 all, dialed,
received, or missed calls.
(Appears only when a phone is connected to the system.)
1To make a call using a Speed Dial entry
When a voice tag is stored, press the button to
call the number using the voice tag. 2 Speed Dial P. 360
Any voice-tagged speed dial entry can be dialed by
voice from any screen.
Press the button and follow the prompts.
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 369 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 372 of 585

Continued371
uuBluetooth® HandsFreeLink ®uHFL Menus
Features
HFL can display newly received text or e-mail messages as well as 20 of the most
recently received messages on a linked cell phone. Each received message can be
read aloud and replied to using a fixed common phrase.
1.A pop-up appears and notifies you of a new
text or e-mail message.
2. Select Read to listen to the message.
uThe text or e-mail me ssage is displayed.
The system automatica lly starts reading
out the message.
3. To discontinue the mess age read-out, select
Stop .
■Receiving a Text/E-mail Message1Receiving a Text/E-mail Message
The system does not display any received messages
while you are driving. You can only hear them read aloud.
The system can only receive massages that are sent a
text (SMS) messages. The message sent using the
data services will not be displayed in the list.
With some phones, you may be able to display up to
20 most recent text and e-mail messages.
State or local laws may limit your use of the HFL text
/e-mail message feature. Only use the text /e-mail
message feature when conditions allow you to do so
safely.
When you receive a text or e-mail message for the first time since the phone is paired to HFL, you are
asked to turn the New Message Notification
setting to On.
2 To turn on or off the text/e-mail notice
P. 357
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 371 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 374 of 585
Continued373
uuBluetooth® HandsFreeLink ®uHFL Menus
Features
■Displaying text messages
1. Go to the Phone menu screen.
2 Phone menu screen P. 352
2. Select Text/Email .
uSelect account if necessary.
3. Select a message.
uThe text message is displayed. The
system automatically starts reading the
message aloud.
■Displaying Messages1Displaying Messages
The icon appears next to an unread message.
If you delete a message on the phone, the message is
also deleted in the system. If you send a message
from the system, the message goes to your phone’s
outbox.
To see the previous or next message, select
(previous) or (next) on the message screen.
Message List
Text Message
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 373 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 375 of 585
374
uuBluetooth® HandsFreeLink ®uHFL Menus
Features
■Displaying e-mails
1. Go to the Phone menu screen.
2 Phone menu screen P. 352
2. Select Text/Email .
uSelect Select Account if necessary.
3. Select a folder.
4. Select a message.
uThe e-mail is displayed. The system
automatically starts reading the message
aloud.
Folder List
Message List
E-mail
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 374 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 376 of 585
Continued375
uuBluetooth® HandsFreeLink ®uHFL Menus
Features
■Read or Stop reading a message
1. Go to the text or e-mail message screen.
uThe system automatica lly starts reading
the message aloud.
2 Displaying Messages P. 373
2. Select Stop to stop reading.
Select Read again to start reading the
message from the beginning.
■ Reply to a message
1. Go to the text or e-mail message screen.
uThe system automatica lly starts reading
the message aloud.
2 Displaying Messages P. 373
2. Select Reply.
3. Select the reply message.
uThe pop-up menu appears on the screen.
4. Select Send to send the message.
uComplete appears on the screen when
the reply message was successfully sent.
1Reply to a message
The available fixed reply messages are as follows: • Talk to you later, I’m driving.
• I’m on my way.
• I’m running late.
• OK
• Yes
• No
You cannot add, edit, or delete reply messages.
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 375 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 397 of 585

uuWhen DrivinguShifting
396
Driving
■Shift Lever Operation1Shift Lever Operation
NOTICE
When you change the shift lever from (D to (R and
vice versa, come to a complete stop and keep the brake pedal depressed.
Operating the shift lever be fore the vehicle has come
to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the
lever position befo re pulling away.
If the transmission indicator blinks when driving, in
any shift position, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut of f if you drive at engine
speeds in or over the tac hometer’s red zone (engine
speed limit). If this happe ns, you may experience a
slight jolt.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down. Depress the brake pedal first.
Shift Lever Position
Indicator
Depress the brake pedal and press the shift lever release button to shift.
Shift without pressing the shift lever release button.
Press the shift lever re lease button and shift.Tachometer’s red zone
Models with info
rmation display
Shift Lever Position
Indicator
Tachometer’s red zone
Models with driver information interface
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 396 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分
Page 398 of 585

397
uuWhen DrivinguShifting
Continued
Driving
Shifting
Change the shift position in accordance with your driving needs. ■Shift lever positions
Continuously variable transmission models with paddle shifters
1Shifting
You cannot change the pow er mode from ON to
VEHICLE OFF (LOCK) unless the shift lever is in
(P .
The vehicle may move forwar d very slightly even in
(N while the engine is cold.
Depress the brake pedal firm ly and, when necessary,
apply the parking brake.
When shifting positions in extremely low
temperatures (-22°F/-30°C), there may be a short delay before the shift posit ion is displayed. Always
confirm you are in the corr ect shift position before
driving.
Reverse
Used when reversing
Drive
Used: ● For normal driving
● When temporarily driving in the 7-speed manual shift mode
Park
Used when parking or starting the engine
Neutral
Used when idling
Release Button Drive (S)
Used: ●
For better acceleration
● To increase engine braking
● When going up or down hills
● When driving in the 7-speed manual
shift mode
16 CIVIC 2D HC2 (0A 01 0C)-31TBG6000.book 397 ページ >0>.>/6年>0月>/>0日 金曜日 午後4時>/6分