4
Remote Keyless Entry Transmitter
Unlock
Press to unlock the driver’s door . Press again to unlock all doors and the liftgate .
The Unlock setting can be changed in the Vehicle Settings menu .
Lock
Press to lock all doors and the liftgate . The driver’s door will not lock if open .
Liftgate
Press and hold to open/stop/close the power liftgateF .
Vehicle Locator/ Panic Alarm
Press and release to locate your vehicle . The turn signal lamps will flash and the horn will sound.
Press and hold to activate the alarm . The turn signal lamps will flash and the horn will sound until the button is pressed again or the ignition is turned on .
Remote Vehicle StartF
Press and release the Lock button and then press and hold the button until the turn signal lamps flash to start the engine from outside the vehicle . After entering the vehicle, turn the ignition to the On position .
– During a remote start, the engine will run for 10 minutes .
– Repeat these steps for an addi-tional 10 minutes . A remote start can be extended once .
– Press and hold the button until the parking lamps turn off to cancel a remote start .
With the vehicle in Park, push down the lever on the left side of the steering column to adjust the steering wheel . The steering wheel can then be moved up or down and in or out . After adjustment, pull up the lever to lock the steering wheel in place .
See Instruments and Controls in your Owner Manual.
Tilt/Telescopic Steering Wheel
F Optional equipment
Note: To change the remote lock, unlock, and remote start settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
