4
Remote Keyless Entry Transmitter
Unlock
Press to unlock the driver’s door . Press again to unlock all doors and the liftgate .
The Unlock setting can be changed in the Vehicle Settings menu .
Lock
Press to lock all doors and the liftgate . The driver’s door will not lock if open .
Liftgate
Press and hold to open/stop/close the power liftgateF .
Vehicle Locator/ Panic Alarm
Press and release to locate your vehicle . The turn signal lamps will flash and the horn will sound.
Press and hold to activate the alarm . The turn signal lamps will flash and the horn will sound until the button is pressed again or the ignition is turned on .
Remote Vehicle StartF
Press and release the Lock button and then press and hold the button until the turn signal lamps flash to start the engine from outside the vehicle . After entering the vehicle, turn the ignition to the On position .
– During a remote start, the engine will run for 10 minutes .
– Repeat these steps for an addi-tional 10 minutes . A remote start can be extended once .
– Press and hold the button until the parking lamps turn off to cancel a remote start .
With the vehicle in Park, push down the lever on the left side of the steering column to adjust the steering wheel . The steering wheel can then be moved up or down and in or out . After adjustment, pull up the lever to lock the steering wheel in place .
See Instruments and Controls in your Owner Manual.
Tilt/Telescopic Steering Wheel
F Optional equipment
Note: To change the remote lock, unlock, and remote start settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
17
Automatic Transmission Features
Electronic Range Select (ERS) Mode
The Electronic Range Select mode allows the driver to manually select the range of gear positions . This feature can be used to limit the top gear while towing or to downshift when driving on a downhill grade to provide engine braking . ERS is not designed to provide sportier
performance or to be used to shift gears similar to a manual transmission.
Move the shift lever to the Manual (M) position .
Press the +/– button (B) on the shift lever to increase/decrease the gear range available . All gears below the selected gear will be available to use .
If vehicle speed is too high or too low for the requested gear, the shift will not occur .
See Driving and Operating in your Owner Manual.
Fuel Economy (eco) Mode
The Fuel Economy (eco) mode (on 4-cylinder models only) can improve the vehicle’s fuel economy by changing the transmission shift points, adjusting climate control operation and making
sev eral other fuel-saving adjustments . When eco mode is engaged, transmis-sion shifts may be more noticeable and more noise and vibration at idle may be experienced .
Press the eco button (A) by the shift lever to turn the eco mode on or off . The eco light will illuminate on the instrument cluster when active .
Cruise Control
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the thumbwheel up to resume a set speed .
When the system is active, rotate the thumbwheel up to increase speed .
SET– Set/Coast
When the system is active, rotate the thumbwheel down to decrease speed .
Cancel
Press to cancel the cruise control but retain the set speed in memory .
The cruise control set speed is erased when cruise control or the vehicle ignition is turned off .
See Driving and Operating in your Owner Manual.
Setting Cruise Control
1 . Press the ON/OFF button . The Cruise Control symbol will illuminate in white in the instrument cluster .
2 . When traveling at the desired speed, rotate the SET– thumbwheel down to set the speed . The symbol will illuminate in green in the instrument cluster .
A
B
