2016 FORD SUPER DUTY wiper blades

[x] Cancel search: wiper blades

Page 7 of 510

FORD SUPER DUTY 2016 3.G Owners Manual Reporting Safety Defects (U.S.
Only)..............................................................221
Reporting Safety Defects (Canada Only)............................................................

Page 72 of 510

FORD SUPER DUTY 2016 3.G Owners Manual WINDSHIELD WIPERS
Note:
Fully defrost the windshield before
switching on the windshield wipers.
Note: Make sure the windshield wipers are
switched off before entering a car wash.
Note: Clean the winds

Page 247 of 510

FORD SUPER DUTY 2016 3.G Owners Manual BRAKE FLUID CHECK
Fluid levels between the MIN and MAX
lines are within the normal operating range;
there is no need to add fluid. If the fluid
levels are outside of the normal operating
range, the pe

Page 250 of 510

FORD SUPER DUTY 2016 3.G Owners Manual CHECKING THE WIPER
BLADES
Run the tip of your fingers over the edge of
the blade to check for roughness.
Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING

Page 261 of 510

FORD SUPER DUTY 2016 3.G Owners Manual •
Do not allow wax to come in contact
with any non-body (low-gloss black)
colored trim. The wax will discolor or
stain the parts over time.
•Roof racks.
• Bumpers.
• Grained door handles.
•

Page 458 of 510

FORD SUPER DUTY 2016 3.G Owners Manual Avoid the Rising Cost of Properly
Maintaining Your Vehicle!
Ford Extended Service Plan also offers a
Premium Maintenance Plan that covers all
scheduled maintenance, and selected
wear items. The covera

Page 501 of 510

FORD SUPER DUTY 2016 3.G Owners Manual Capacities and Specifications - 6.2L
V8...................................................................307
Specifications..................................................... 308
Capacities and Spe

Page 510 of 510

FORD SUPER DUTY 2016 3.G Owners Manual Washers
See: Cleaning the Exterior.............................. 256
See: Wipers and Washers................................. 69
Waxing..............................................................257