A Revolutionary Way to
Connect with Your Vehicle
Use the touchscreen to explore and interact
with your vehicle. The touchscreen works the
same way as traditional controls, knobs and
buttons do. Press the various icons on your
touchscreen to personalize the many features
and settings of your vehicle all in one place.
The system provides easy interaction with
your audio, multimedia, climate control,
navigation* and mobile apps.
General tips
» Press the home icon at any time to return
to your home screen.
» Press the desired icon on the sensitive
touchscreen accurately. If you’re wearing
gloves, make sure they’re optimized for
touchscreen use.
» Refer to your SYNC Supplement, visit
the website or call the toll-free number
for more information. See the inside
front cover of this guide for details.
» Pair your phone to SYNC.
To pair your phone
» Make sure you activate Bluetooth on
your device.
» Touch Add Phone on your touchscreen.
Phone
After pairing your phone, you can
access more phone-dependent features:
» Recent call lists.
» Contacts: All of your contacts from
your phone display alphabetically.
Sort and view your contacts by
selecting a specific letter.
» Phone settings: Pair another
phone, and set ring tones and alerts.
» Text messages: View all of your
recent text messages.
» Do not disturb: Send all calls to
your voicemail, and all ring tones
and alerts set to silent mode.
Refer to your SYNC Supplement for
complete details.
Navigation*
Press the navigation icon to set your
destination. Select one of two ways to
find your destination:
» Map mode shows advanced viewing
of 2-D city maps, 3-D landmarks and
3-D city models (when available).
SYN C® 3*
» Follow the on-screen instructions.
The system audibly prompts
you to search for SYNC on
your device.
» Select SYNC on your device.
» Confirm that the six-digit
PIN appearing on your device
matches the six-digit PIN that
displays on the SYNC 3 screen.
» The display indicates when the
pairing is successful.
SYNC prompts you to choose
your settings for certain features.
Your cell phone may also prompt
you to give SYNC permission to
access information.
» Destination mode lets you key in a
specific address or use a variety of
search methods to locate where you
want to go.
Refer to your SYNC Supplement for
complete details.
Set a Destination
1. Press Destination on your
touchscreen and then press Search.
2. Enter a street address, intersection,
city or a point of interest (POI).
3. After you choose your destination,
press Start. The system uses a
variety of screens and visible prompts
to guide you to your destination.
During your route, you can press the
maneuver arrow icon on the map if you
want the system to repeat the previous
route guidance instructions.
The navigation map shows your
estimated time of arrival, remaining
travel time and the distance to
your destination.
Navigation Menu
While you are on your route, you can
change your touchscreen view. To
change the view, touch Menu on the
bottom of the screen and then select Screen View to choose from any of the
following selections:
» Full Map
» Highway Exit Info displays on the
right side of the touchscreen. View
POI Icons (restaurants, ATMs, etc.)
as they pertain to each exit. You
can select a POI as a waypoint, if
you wish.
» Turn List displays SiriusXM Traffic
and Travel Link* information. If
traffic conditions change to cause
a major delay on the originally
selected route, then SYNC 3 provides
an automatic re-route.
Note: Minor traffic changes do not
prompt a re-route.
*if equipped98
*if equipped
