2016 FORD F150 door lock

AUDIO
No matter how you store your music, SYNC makes it yours to enjoy when you're behind
the wheel. Just press the Audio icon on the touchscreen. From here, you can easily go
between AM/FM, SiriusXM and other media sources.
SET YOUR RADIO PRESETS
• Tune to the station and then press and hold one of the memory preset buttons. The
audio mutes briefly while the system saves the station, and then the audio returns.
• Two preset banks are available for AM and three banks for FM. To access additional
presets, tap the preset button. The indicator on the preset button shows which bank of
presets you are currently viewing.
BRING IN YOUR OWN MUSIC
Use SYNC to play all of your favorite music from phones, flash drives and other devices.
Plug your device into a USB port, select Sources and then choose USB . Wait for the
system to finish indexing your music to begin listening.
You can even create random playlists by using the Shuffle function.
USB AND POWER POINT LOCATIONS
Depending on your vehicle, you may find USB and power point outlets in and around the
center console, in the instrument panel and on the back of the center console for rear-seat
passengers. See the Storage Compartment section in your Owner's Manual.
SYNC
® 3*
MEMORY FUNCTION*
The feature automatically recalls the position
of the driver seat, power mirrors and steering
column*. Use the memory controls on the door
panel to program and then recall memory
positions. To program, switch the ignition on.
1. Move the memory features to the desired positions.
2. Press and hold button 1 until you hear a tone.
3. Use this same procedure to set the second and third positions using
buttons 2 and 3, respectively.
Press a control to recall the set positions. You can also program your memory
seats to your transmitter. That way, when you unlock your door with the
transmitter, your memory features automatically move into your saved position.
See the Seats chapter in your Owner's Manual for more details.
MULTI-CONTOUR FRONT SEATS WITH ACTIVE MOTION*
Using the button mounted on the outside of the front seats, or through the
touchscreen, you and a front-seat passenger can adjust the massage and support
settings. You can also control the intensity of the massage, increase or decrease
the lumbar bolster and cushion support, and adjust the height of the bolster. To
program, switch the ignition on. Refer to Mult-Contour Front Seats with Active
Motion in the Seats chapter of your Owner's Manual for more details. ADJUSTABLE HEAD RESTRAINTS
Adjust the seatback to an upright driving position before adjusting the head
restraint. Adjust the head restraint so that the top of it is level with the top of your
head and as far forward as possible. Make sure that you remain comfortable. To
raise, pull up on the head restraint. To lower, press the head restraint down while
pressing and holding the guide sleeve button.
You may also be able to tilt the head restraint forward or backward for additional
comfort. Pivot the head restraint forward to the desired location. After the head
restraint reaches the forward-most tilt position, pivot it forward again to return it
to its standard position.
Note: After tilting the head restraint, do not attempt to force the head
restraint backward.
16 – 17
Convenience
*if equipped*if equipped

REMOTE ENTRY SYSTEM FEATURES*
Press
once to unlock the driver door. Press again within three seconds to
unlock all of the doors and tailgate*.
Press
once to lock all the doors and the tailgate*. Press again within three
seconds to confirm that you closed and locked all of the doors and tailgate*.
Press
to activate the panic alarm. Press again or switch the ignition on to
deactivate the panic alarm.
Car finder: Press
twice within three seconds. The horn sounds and the
direction indicators flash. We recommend that you use this method to locate
your vehicle, rather than using the panic alarm.
REMOTE TAILGATE RELEASE*
With the tailgate unlocked, you can open the power tailgate by using the
remote transmitter. Press
twice within three seconds.
POWER RUNNING BOARDS*
The running boards automatically extend down and out when you open the
door. This can help you enter and exit your vehicle. When you close the doors,
the running boards return to the stowed position after a two-second delay. To
operate the Power Deploy feature manually, use the information display.
Set the running boards in the deployed position (OUT) to access the roof.
The running boards return to the stowed position and enter automatic mode
when the vehicle speed exceeds 5 mph (8 km/h). TAILGATE STEP*
Use the step to make entering the truck bed easier. This feature includes a
step-up into the box and a handle. These items store inside the tailgate.
To Use
1.
Lower the tailgate.
2. Push the button in the center of the tailgate moulding. The step pops
out slightly.
3. Pull the step out fully and lower it to the lowest position.
4. Pull the yellow handle stop toward you and out of the tailgate.
5. Rotate the handle up from a horizontal position to a vertical one until
you hear a sound, indicating that the handle locked into place.
To Close
1. Store the telescoping handle first. Press button 1 to lower the
telescoping handle.
2. Push button 2 to unlock the handle. Rotate the handle down to a horizontal
position, and then slide it back into the tailgate.
3. Raise the step up and then push it into the tailgate fully to secure.
BOX SIDE STEP*
Use the step for easier access to the trunk bed.
To Use
Push down on the release lever with your foot.
The step automatically extends from the
stowed position.
Push the step under the truck with your foot until it fully latches. Do not push
on the release lever while attempting to stow the step. CARGO AND TRAILER HOOKUP LAMPS*
The cargo lamps are positioned in the central high mounted stop lamp and
to either side of the cargo box. The trailer hookup lamp is positioned on the
tailgate next to the handle. Use the control in the box or on the instrument
panel to switch the lights on and off.
Note: The box lights turn off automatically after 10 minutes, fading
gradually to off.
BOXLINK™ CLEATS*
These cleats attach to the inner box walls to help you to tie down cargo. Lock
the cleats to prevent removal and unlock them for removal.
You can take the cleats out to attach accessories, upfitter package items and
more. See your Owner's Manual for complete details.
Function
You can enable and disable the power running board feature in the
information display. See the Information Display section in your
Owner's Manual for details.
Note: Do not use any part of the power running boards to lift your vehicle
when jacking. Always use proper jacking points. See your Owner’s Manual
for details.
*if equipped
20 – 21
*if equipped*if equipped