2016 FORD F150 center console

191816171520
16
18
19
20
15
12
ADVANCETRAC® WITH ROLL
STABILITY CONTROL™
(RSC
®) STABILITY
ENHANCEMENT SYSTEM
The AdvanceTrac stability system
helps you to keep control of your
vehicle when on a slippery surface.
The electronic stability control portion
of the system helps avoid skids and
lateral slides. Roll stability control
helps avoid a vehicle rollover. The
traction control system helps avoid
drive wheel spin and loss of traction.
You can switch the system
off manually
.
Refer to your Stability Control
chapter in your Owner’s Manual for
more details.
TRAILER SWAY CONTROL*
The feature applies your vehicle brakes
at individual wheels and, if necessary,
reduces engine power. If the trailer
begins to sway, the stability control
light flashes
. The first thing to do
is slow your vehicle down, then pull
safely to the side of the road and check
for proper tongue load and trailer
load distribution.
For more information, please refer
to the Towing chapter in your
Owner’s Manual. AUTO-START-STOP
*
On certain models, the system
helps reduce fuel consumption
by automatically shutting off and
restarting the engine while at a stop.
The engine will restart automatically
when you release the brake pedal.
To switch this feature off, press
the Auto-Start-Stop button
,
located on the center console. The
button lights. Press the button again
to restart.
Note: The system automatically
turns off when you switch on tow/
haul or 4x4 mode.
See the Unique Driving
Characteristics chapter in your
Owner's Manual for more details.
8 – 9
110-VOLT, 400-WATT
POWER OUTLET
You can use the power outlet when
your vehicle is running to power
many electric devices, including but
not limited to:
• Electric hand drills.
• Rechargeable power tools.
• Video games.
• Laptops.
• Television screens.
Other power points and outlets are
in the center console.
See the Auxiliary Power Points
chapter in your Owner's Manual
for details.
Note: Do not use any extension
cord with the 110 volt AC power
outlet, since it will defeat the
safety protection design.
Note: Do not use a single power
outlet to power multiple devices.
It may cause the power outlet to
exceed the 400 watt load limit
and overload, resulting in fire or
serious injury.
TOW/HAUL MODE
This feature helps improve
transmission operation when towing

a trailer or hauling a heavy load.
To switch tow/haul on, press the
button (on the side of the gearshift
lever on a floor-shift transmission
[as shown], or on the end of the
column-shift transmission lever).
The TOW HAUL indicator light
appears in the instrument cluster.
To switch off, press the button again.
Refer to the Transmission chapter
in your Owner’s Manual for
more information.
PROGRESSIVE
RANGE SELECTION
With the gearshift lever in drive
(D), press the (–) button on your
transmission gearshift lever or column
shifter to switch progressive range
selection on. The available and
selected gears light in the information
display. All available gears show with
the current gear indicated. Press the
(–) button again to lock out gears
beginning with the highest gear.
For example, press the (–) button
twice to lock out the 6th and 5th
gears. Only the available gears display
and the transmission automatically
shifts between the available gears. Press the (+) button to unlock gears
to allow the transmission to shift to
higher gears. The transmission will
shift automatically within the gear
range you select.
HAZARD WARNING
FLASHER CONTROL17Instrument PanelHILL DESCENT CONTROL
The feature helps you set and
maintain vehicle speed while
descending steep grades on various
surface conditions. This feature can
maintain vehicle speeds on downhill
grades between 2 mph (5 km/h)
and 12 mph (20 km/h).
At speeds between 20 mph
(32 km/h) and 40 mph (64 km/h),
the system remains armed, but
descent speed cannot be set
or maintained.
At speeds above 40 mph (64 km/h),
the system will turn off and you need
to switch the system back on to use.
To switch this feature on and set the
descent speed, do the following:
1.
Press and release the hill descent
button
located on the
instrument panel. A light in
the control turns on and a
tone sounds.
2. To increase descent speed, press
the accelerator pedal until you
reach the desired speed. To
decrease descent speed, press
the brake pedal until you reach
the desired speed.
For more detailed information,
please refer to your Owner’s Manual.
*if equipped

AUDIO
No matter how you store your music, SYNC makes it yours to enjoy when you're behind
the wheel. Just press the Audio icon on the touchscreen. From here, you can easily go
between AM/FM, SiriusXM and other media sources.
SET YOUR RADIO PRESETS
• Tune to the station and then press and hold one of the memory preset buttons. The
audio mutes briefly while the system saves the station, and then the audio returns.
• Two preset banks are available for AM and three banks for FM. To access additional
presets, tap the preset button. The indicator on the preset button shows which bank of
presets you are currently viewing.
BRING IN YOUR OWN MUSIC
Use SYNC to play all of your favorite music from phones, flash drives and other devices.
Plug your device into a USB port, select Sources and then choose USB . Wait for the
system to finish indexing your music to begin listening.
You can even create random playlists by using the Shuffle function.
USB AND POWER POINT LOCATIONS
Depending on your vehicle, you may find USB and power point outlets in and around the
center console, in the instrument panel and on the back of the center console for rear-seat
passengers. See the Storage Compartment section in your Owner's Manual.
SYNC
® 3*
MEMORY FUNCTION*
The feature automatically recalls the position
of the driver seat, power mirrors and steering
column*. Use the memory controls on the door
panel to program and then recall memory
positions. To program, switch the ignition on.
1. Move the memory features to the desired positions.
2. Press and hold button 1 until you hear a tone.
3. Use this same procedure to set the second and third positions using
buttons 2 and 3, respectively.
Press a control to recall the set positions. You can also program your memory
seats to your transmitter. That way, when you unlock your door with the
transmitter, your memory features automatically move into your saved position.
See the Seats chapter in your Owner's Manual for more details.
MULTI-CONTOUR FRONT SEATS WITH ACTIVE MOTION*
Using the button mounted on the outside of the front seats, or through the
touchscreen, you and a front-seat passenger can adjust the massage and support
settings. You can also control the intensity of the massage, increase or decrease
the lumbar bolster and cushion support, and adjust the height of the bolster. To
program, switch the ignition on. Refer to Mult-Contour Front Seats with Active
Motion in the Seats chapter of your Owner's Manual for more details. ADJUSTABLE HEAD RESTRAINTS
Adjust the seatback to an upright driving position before adjusting the head
restraint. Adjust the head restraint so that the top of it is level with the top of your
head and as far forward as possible. Make sure that you remain comfortable. To
raise, pull up on the head restraint. To lower, press the head restraint down while
pressing and holding the guide sleeve button.
You may also be able to tilt the head restraint forward or backward for additional
comfort. Pivot the head restraint forward to the desired location. After the head
restraint reaches the forward-most tilt position, pivot it forward again to return it
to its standard position.
Note: After tilting the head restraint, do not attempt to force the head
restraint backward.
16 – 17
Convenience
*if equipped*if equipped

CLIMATE CONTROLLED FRONT SEATS*
To operate the heated feature, press
repeatedly to
cycle through the various settings and off.
To operate the cooled feature, press
repeatedly to
cycle through the various settings and off. The cooled
seats will function only when the engine is running.
Note: More lights indicate higher settings.
REAR HEATED SEATS*
The rear-seat heat controls are on the back of the center console. To operate the
heated seats, press
repeatedly to cycle through the various settings and off.
The indicator light illuminates when you switch the heated seats on.
Note: When the ignition is in the on position, press the heated seat switch to
enable heating mode. The heated seats turn off automatically when you switch
off the engine. OVERHEAD CONSOLE*
From right to left, the controls operate the following functions:
Driver Lighting Controls

Driver map lamp: Press to switch on and off.
Overhead dome light: Press to switch on and off.
Door open overhead dome light: Press to override the dome lamp
automatically turning on.
Moonroof Controls*

Moonroof open button: Press to open. The moonroof stops short of the fully
opened position. To open the moonroof fully, press the open button again.

Moonroof close button: Press to close.

Moonroof vent button: Press to vent.
Sunshade Controls*

Sunshade open button: Press to open. The sunshade opens automatically
with the moonroof. You can also open the sunshade with the
moonroof closed.

Sunshade close button: Press to close.
Note: The sunshade stops short of a full-open
position for the comfort of rear passengers. To
open the sunshade fully, press the control again.
Passenger Lighting Control
Passenger map lamp: Press to switch on
and off.
Function
18 – 19
Comfort
360-DEGREE CAMERA*
The system consists
of front, side and
rear cameras. Press
the control to toggle
through different
camera views to see:
• What is directly in front or behind your vehicle.
• Cross traffic view in front and behind your vehicle.
Refer to the Parking Aids chapter in your Owner’s
Manual for more information.
REAR SENSING SYSTEM*
This system can warn you if there is an object behind
the vehicle. A warning tone sounds and increases in
frequency as you get closer to the object. It sounds a
continuous warning when the object is less than
12 inches (30 cm) away. The system is not effective
when the vehicle is traveling above 3 mph (5 km/h)
and may not detect angular or moving objects.
Note: Visibility aids do not replace the need to
watch where the vehicle is moving. Refer to your
Owner’s Manual for safety information, more
details and limitations. MYKEY
®
MyKey allows you to program certain driving
restrictions in order to promote good driving habits.
You can program speed restrictions, limited volume
levels and more, depending on your vehicle's level of
equipment. For complete information, refer to the
MyKey chapter in your Owner’s Manual.
ACTIVE PARK ASSIST*
The system detects an available parallel parking
space and automatically steers the vehicle into the
space (hands-free) while you control the accelerator,
gearshift and brakes. The system visually and audibly
instructs you to park your vehicle.
To use active park assist, press the button

located on the center console near the gearshift lever.
To stop the parking procedure, grab the steering wheel
or press the control again. Before using this feature
and for complete information, refer to the Parking
Aids chapter of your Owner’s Manual.
Note: The driver is always responsible for controlling
the vehicle, supervising the system, and intervening,
if required. LANE KEEPING SYSTEM*
The system notifies you to stay in your lane through
the steering system and the instrument cluster display
when the front camera detects an unintentional
drift out of your lane is likely to occur. The system
automatically detects and tracks the road lane
markings using a camera mounted behind the interior
rear view mirror.
Press the button
located on the center console
to switch the system on or off.
BLIS
® (BLIND SPOT
INFORMATION SYSTEM)
AND CROSS TRAFFIC ALERT*
BLIS aids you in detecting vehicles that may have
entered into your blind spot zone. The cross traffic
alert feature warns you of vehicles approaching from
the sides when the transmission is in reverse (R).
BLIS and cross traffic alert will display a yellow
indicator light in your exterior mirrors. Cross traffic
alert will also sound tones and display messages to
warn you which direction vehicles are approaching.
Refer to the Driving Aids chapter in your Owner’s
Manual for more information.
*if equipped
*if equipped*if equipped