2016 FIAT TIPO 5DOORS STATION WAGON dashboard

[x] Cancel search: dashboard

Page 87 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual Main recommendations to carry
children safely
Install the child restraint systems on
the rear seat, which is the most
protected position in the event of an
impact.
Keep children in rearward facing chi

Page 88 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual 82)After installing a child restraint system,
do not move the seat: always remove the
child restraint system before making any
adjustment.
83)Always make sure that the diagonal
section of the seat bel

Page 89 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual The airbags are not deployed in the
event of minor frontal impacts (for which
the restraining action of the seat belts is
sufficient).
Seat belts must always be worn. In the
event of frontal impacts t

Page 92 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual SIDE BAGS
To help increase occupants protection
in the event of side impact collisions,
the vehicle is equipped with front side
bags and window bags.
Side bag
These comprise two bags located in
the fr

Page 93 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual 89)When there is an active passenger
airbag, DO NOT install rearward facing
child restraint systems on the front seat.
Deployment of the airbag in an accident
could cause fatal injuries to the child
r

Page 98 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual 1.4 95 HP versions: To engage
reverse R from neutral, lift the ring 1
fig. 83 under the knob and at the same
time move the lever to the right and
then backwards.
1.4 T–jet 120 HP — 1.6 Multijet 12

Page 129 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual REPLACING FUSES
GENERAL
131) 132) 133) 134)
47)
Fuses protect the electrical system:
they intervene (blow) in the event of a
failure or improper action on the
system.
Fuse extracting pliers
To replace

Page 130 of 240

FIAT TIPO 5DOORS STATION WAGON 2016 1.G Owners Manual at the same time slowly rotate the
screw anticlockwise, until resistance is
encountered (do not overtighten);
slowly release the screw;
opening is indicated by the entire
screw head coming out of its
Page:   < prev 1-8 9-16 17-24 next >