2016 DODGE DART weight

[x] Cancel search: weight

Page 76 of 671

DODGE DART 2016 PF / 1.G Owners Manual WARNING!(Continued)
•Placing an object on the floor under the front
passenger seat may prevent the OCS from working
properly, which may result in serious injury or
death in a collision. Do not place

Page 77 of 671

DODGE DART 2016 PF / 1.G Owners Manual •Do not add a secondary seat cover or mat.
• At no time should any Supplemental Restraint System
(SRS) component or SRS related component or fastener
be modified or replaced with any part except t

Page 78 of 671

DODGE DART 2016 PF / 1.G Owners Manual WARNING!(Continued)
the Front Passenger Seat Storage bin, make sure the
front passenger seat cushion is pushed downward
and fully latched to the base. Over-stuffing the
storage bin, or a not fully lat

Page 91 of 671

DODGE DART 2016 PF / 1.G Owners Manual Summary Of Recommendations For Restraining Children In Vehicles
Child Size, Height, Weight Or AgeRecommended Type Of Child Re-
straint
Infants and Toddlers Children who are two years old or younger an

Page 92 of 671

DODGE DART 2016 PF / 1.G Owners Manual Infants And Child Restraints
Safety experts recommend that children ride rear-facing
in the vehicle until they are two years old or until they
reach either the height or weight limit of their rear-fac

Page 93 of 671

DODGE DART 2016 PF / 1.G Owners Manual remain in a forward-facing child seat with a harness for
as long as possible, up to the highest weight or height
allowed by the child seat.
All children whose weight or height is above the
forward-fac

Page 95 of 671

DODGE DART 2016 PF / 1.G Owners Manual Recommendations For Attaching Child Restraints
Restraint Type CombinedWeight of the
Child + Child Restraint Use any attachment method shown with an “X” Below
LATCH –
Lower Anchors Only Seat Belt

Page 98 of 671

DODGE DART 2016 PF / 1.G Owners Manual What is the weight limit (child’s weight +
weight of the child restraint) for using the
LATCH anchorage system to attach the child
restraint?65 lbs (29.5 kg) Use the LATCH anchorage system until the