2016 DODGE CHARGER SRT warning

[x] Cancel search: warning

Page 65 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual WARNING!
•No objects should be placed over or near the air
bag on the instrument panel or steering wheel
because any such objects could cause harm if the
vehicle is in a collision severe enough to c

Page 66 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual Because air bag sensors measure vehicle deceleration
over time, vehicle speed and damage by themselves are
not good indicators of whether or not an air bag should
have deployed.
Seat belts are necessa

Page 68 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual deploys through the seat seam into the space between the
occupant and the door. The SAB moves at a very high
speed and with such a high force that it could injure
occupants if they are not seated prop

Page 69 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual injury reduction potential provided by the seat belts and
body structure.
The SABICs deploy downward, covering the side win-
dows. An inflating SABIC pushes the outside edge of the
trim out of the way

Page 70 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual The SABICs and SABs (“Side Air Bags”) are designed to
activate in certain side impacts and certain rollover
events. The Occupant Restraint Controller (“ORC”) de-
termines whether the deploymen

Page 71 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual WARNING!(Continued)
properly. In some collisions, Side Air Bags won’t
deploy at all. Always wear your seat belt even
though you have Side Air Bags.
NOTE: Air bag covers may not be obvious in the int

Page 73 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual Do not drive your vehicle after the air bags have de-
ployed. If you are involved in another collision, the air
bags will not be in place to protect you.
WARNING!
Deployed air bags and seat belt prete

Page 74 of 634

DODGE CHARGER SRT 2016 7.G Owners Manual Enhanced Accident Response System Reset
Procedure
In order to reset the Enhanced Accident Response System
functions after an event, the ignition switch must be
changed from ignition START or ON/RUN to