2016 DODGE CHALLENGER light

over 10, will overwrite the oldest saved run for Uconnect
System storage. The operation of the Save feature is listed
below:
With a USB jump drive installed, press the “USB” button
to save to the jump drive.With an SD Card installed, press the “SD Card” to save
runs to the SD Card.
Press the “Uconnect” button to save the runs to the
Owner web page.
Press the “Cancel” button to view the previously dis-
played timer “Ticket.”
The “Tickets” contain the timers listed below:
•
Reaction Time
Measures the driver’s reaction time for launching the
vehicle against a simulated a drag strip timing light
(behavior modeled after 500 Sportsman Tree) displayed
in the Driver Information Display (DID).
NOTE:
Positive values closest to zero are best, negative values
mean you have faulted the start and the value won’t be
used for best times.
Performance Pages — Save
1
UNDERSTANDING YOUR INSTRUMENT PANEL 11

UNDERSTANDING YOUR INSTRUMENT PANEL
CONTENTS
SRT PERFORMANCE PAGES ...............38
▫ Home ...............................39
▫ Timers ..............................40
▫ Gauges 1 ............................43
▫ Gauges 2 ............................45
▫ G-Force .............................47
▫ Engine ..............................49
 SRT DRIVE MODES ......................50
▫ Track Mode ..........................53
▫ Sport Mode ..........................54 ▫
Default Mode .........................55
▫ Custom Mode .........................56
 RACE OPTIONS ........................63
▫ Launch Control ........................63
▫ Shift Light ...........................65
 VALET MODE ..........................67
 ECO MODE — IF EQUIPPED WITH AUTOMATIC
TRANSMISSION ........................70
1

over 10, will overwrite the oldest saved run for Uconnect
System storage. The operation of the Save feature is listed
below:
With a USB jump drive installed, press the “USB” button
to save runs to the jump drive.With an SD Card installed, press the “SD Card” to save
runs to the SD Card.
Press the “Uconnect” button to save the runs to the
Owner web page.
Press the “Cancel” button to view the last timer “Ticket.”
The “Tickets” contain the timers listed below:
•
Reaction Time
Measures the driver’s reaction time for launching the
vehicle against a simulated drag strip timing light (be-
havior modeled after 500 Sportsman Tree) displayed in
the Driver Information Display (DID).
NOTE:
Positive values closest to zero are best, negative values
mean you have faulted the start and the value won’t be
used for best times.
SRT Performance Pages — “Save”
1
UNDERSTANDING YOUR INSTRUMENT PANEL 41

The SRT Drive Modes main screen displays the current
drive mode and real-time status of the vehicle’s perfor-
mance configuration. The selectable Drive Modes buttons
are Track, Sport, Custom, or Default and will be high-
lighted when displaying the current configuration. Infor-
mation shown below each drive mode button will indi-
cate the actual status of each system, along with a graphic
that displays the status of the vehicle’s components. The
color red indicates “Track,” orange “Sport,” and yellow
“Street.” If the system status shown does not match the
current drive mode set up, a message will be displayed
indicating which values are not matching the current
mode and why.
NOTE:ESC Full-Off can be activated across all of the
Drive Mode features by pushing and holding the ESC Off
button on the instrument panel switch bank for five
seconds. Listed below are the available Drive Modes:
Track Mode
Pressing the “Track” button on the touchscreen will
activate the configuration for typical track driving. The
Transmission, Traction, Steering, and Suspension systems
Drive Modes (Track)
1
UNDERSTANDING YOUR INSTRUMENT PANEL 53

are all set to their “Track” settings highlighted in red. The
Paddle Shifters are enabled.
Sport Mode
Pressing the “Sport” button on the touchscreen will
activate the configuration for typical enthusiast driving.
The Traction, Transmission, Steering, and Suspension
systems are all set to their “Sport” settings highlighted in
orange. The Paddle Shifters are enabled.
Drive Modes (Sport)
54 UNDERSTANDING YOUR INSTRUMENT PANEL

RACE OPTIONS
Press the “Race Options” button on the touchscreen
while in the Drive Modes screen, to display the vehicle’s
Launch Control screen. Within Race Options, you can
activate, deactivate, and adjust the RPM values for the
Launch Control and Shift Light features.
Launch Control
WARNING!
Launch Mode is intended for off-highway or off-road
use only and should not be used on any public
roadways. It is recommended that this feature be
used in a controlled environment, and within the
limits of the law. The capabilities of the vehicle as
measured by the performance pages must never be
exploited in a reckless or dangerous manner, which
can jeopardize the user ’s safety or the safety of
others. Only a safe, attentive, and skillful driver can
prevent accidents.
Race Options
1
UNDERSTANDING YOUR INSTRUMENT PANEL 63

To adjust the Launch RPM, drag the slider bar or press
the arrows on the touchscreen to adjust the holding RPM.
The launch RPM limits will vary between the automatic
transmissions (1500–3500 RPM) and manual transmis-
sions (2500–4500 RPM).For further information refer to “Drive Modes” in “Start-
ing and Operating”.
Shift Light
Your vehicle is equipped with a shift light feature that
illuminates the back lighting of the tachometer (in red)
Launch RPM Set-Up — Charger Automatic Transmission
Shift Light
1
UNDERSTANDING YOUR INSTRUMENT PANEL 65

within the Driver Information Display (DID). This fea-
ture is a visual cue to manually up-shift using the paddle
shifters or the transmission gear selector in manual shift
mode.
To actuate the Shift Light feature, press the “Shift Light”
button on the touchscreen, then press the “Shift Light
On” button on the touchscreen. Activation is shown on
the DID. Pressing the “Shift Light RPM Set-Up” button
on the touchscreen will take you to the Shift Light RPM
Set-Up screen.
NOTE:For automatic transmissions you must be in
Manual Shift Mode using the transmission gear selector
in order to activate the shift light. The Shift Light RPM Set-Up allows you to set the shift
light to actuate for gears 1, 2, 3, 4, and 5-8 (automatic
transmission) 1, 2, 3, 4, and 5-6 (manual transmission).
Pressing and releasing the up/down arrow buttons on
the touchscreen above and below each listed gear, the
RPM values will change in increments of 250 RPM.
Shift Light RPM Set-Up
66 UNDERSTANDING YOUR INSTRUMENT PANEL