2016 Citroen JUMPER phone

232
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
First steps
On/off, volume setting.
Select FM and AM wavebands.
Display the list of connected
telephones.Rotate: scroll through a list or adjust
radio station.
Press: confirm the option displayed in
the screen.
Select USB or AUX source.
in
formation on the current radio
station or media.
rep
eat play.
Select preset stations.
FM-A, FM-B, FM- C, AM-A, AM-B,
AM-C. Mute / restore sound. Radio buttons 1 to 6:
Select a pre-set radio station.
Long press: pre-set a station.
r

andom (shuffle) play
Automatic frequency search up.
Select the next USB track.
Press and hold: fast for ward.
Display the menu and adjust options. Automatic frequency search down.
Select the previous USB track.
Press and hold: fast back.
Abandon the current operation.
Go up one level (menu or folder).
Audio System

233
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
Steering mounted controls
Pause / restore the CD, USB/iPod,
Bluetooth® sources.
Mute / restore sound from the radio.
Switch the microphone off / on during
a telephone call.
Switch voice recognition on.
in

terrupt a voice message to start a
new voice command.
i

nterrupt voice recognition.
Push up or down: increase or
decrease the volume for voice
announcements and music sources,
hands-free and speaking texts. Accept an incoming call.
Accept a second incoming call and
put the current call on hold.
Switch on voice recognition for the
telephone function.
in

terrupt a voice message to issue
another voice command.
i

nterrupt voice recognition. Radio, push up or down: select the
next / previous station.
Radio, hold up or down: sweep
frequencies up / down until the button
is released.
Media, push up or down: select the
next / previous track.
Media, hold up or down: fast for ward

/
b

ack until the button is released.
rej

ect the incoming call.
End the call in progress.
Audio System
AUDio and TELEMATiCS
10

238
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
Telephone
Pairing a Bluetooth®
telephone
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary .
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone configuration).
Select "
co

nnect tel" to start the
pairing procedure, and search for the
name of the system in the telephone. When the pairing procedure has
finished successfully, a screen page
with "
co

nnection successful"
appears:
Confirm to display the menus.
The telephone menu gives access to
the following functions in particular:
"
cal

l log", "
c

ontacts" *, "Keypad ".
When pairing, a screen page is displayed
showing progress in the operation.
Using the telephone's keypad, enter the P
in
displayed in the screen of the system or
confirm in the telephone the P
in displayed.
Press "
Phone".
if n

o telephone has yet been paired
in the system, a special page is
displayed in the screen.
if t

he operation fails, we recommend
switching the function Bluetooth of
your telephone off and then on again.
*
i
f y
our telephone is fully compatible.
receiving a call
An incoming call is announced by a ring and a
superimposed display in the screen.Press this button to accept the
incoming call.
or p

ress this button to reject the call.
Ending a call
To reject a call, press this button at
the steering mounted controls.
Making a call
Select "call log" for access to the
recent calls made.
Select "
c

ontacts" to display your
contacts and use the dial to scroll
through the list.
To dial a number, use the system's
" Keypad ".
Audio System

240
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
Voice commands
Steering mounted controls
Information - using the system
instead of touching the screen, you can
use your voice to issue commands to
the system. Voice interaction can be quickly used
if these buttons are pressed during
a voice message from the system;
i
t
a

llows a voice command to be issued
di r e c t l y.
For example, if the system is speaking
a voice help message and if you want
to know the command to give the
system, by pressing these buttons, the
voice message is interrupted and the
desired voice command can be spoken
directly (so avoiding the need to listed
to the complete voice help message).
When the system is waiting for a voice
command from the user, pressing these
buttons closes the voice session.
To ensure that your voice commands
are always recognised by the system,
we recommend that you follow the
advice below:
-

s
peak with a normal tone of voice,
-

b
efore speaking, always wait for
the "beep" (audible signal),
-

t
he system is able to recognise
the voice commands delivered,
independent off gender, tone and
inflexion of the voice of the person
speaking,
-

k
eep the noise level inside the
vehicle as low as possible,
-

b
efore speaking a voice command,
ask other passengers not to speak.
As the system recognizes voice
commands whatever is said, when
more than one person speaks
at the same time, it is possible
that the system will recognise
commands different or additional to
the one intended, Every time a button is pressed, a
"beep" (audible signal) is produced
and the screen displays a page of
suggestions asking the user to speak a
command.
-
f or best operation, it is
recommended that the windows
and opening roof (for versions/
markets where it is available) be
closed to avoid inter ference from
extraneous noises.
This button switches on the
"Telephone" voice recognition mode,
which makes it possible to start calls,
view the log of recent /received/made,
display contacts, etc.
This button switches on the "Radio/
Media" voice recognition mode,
which makes it possible to tune to a
specific radio station radio or specific
AM/FM radio frequency, play a track
or an album on a USB memory stick /
iPod/MP3 CD.
Audio System

241
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
Global voice commands
These commands can be made from any screen page after pressing the voice recognition or telephone button located on the steering wheel,
as long as there is no telephone call in progress.Level 1 Level 2Level 3
co

mment
Help Provides generic help to the user by suggesting
certain available commands.
ca

ncel Closes the current voice session.
rep

eat
re
peats to the user the last voice message spoken.
Voice tutorial Provides the user with detailed description of how
to use the voice system.
Audio System
AUDio and TELEMATiCS
10

242
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
Level 1Level 2Level 3co mment
c

all * Henri
d
u
pont Dials the telephone number associated with contact
Henri Dupont.
c

all* Henri
d
u
pontMobile phone Dials the telephone number labelled mobile phone
associated with contact Henri Dupont.
ca

ll number 0123456789 Calls the telephone number 0123456789.
ca

ll again Calls the number or contact of the last call made.
ca

ll back Calls the number or contact of the last call received.
re

cent calls* Displays the list of recent calls: outgoing, missed
and incoming.
ca

lls made* Displays the list of outgoing calls.
Missed calls* Displays the list of missed calls.
*

T

his function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the
download has been done.
"telephone" voice commands
if a telephone is connected to the system, these voice commands can be issued from any main screen page after pressing the telephone
button on the steering wheel, as long as there is no telephone call in progress.
If there is no telephone connected, a voice message announces: "No telephone connected. Connect a telephone and try again" and the voice
session will be closed.
Audio System

243
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
"telephone" voice commands
It is possible to replace the "Mobile phone" label by one of the three other labels available: "Home"; " Work"; "Other".Level 1 Level 2Level 3
co

mment
Incoming calls * Displays the list of incoming calls.
co

ntacts* Displays the list of contacts in the telephone
connected.
Search* Henri
d
u
pont Displays the contact Henri Dupont in the list with all
of the numbers saved.
Search* Henri
d
u
pontMobile phone Displays the telephone number labeled as mobile
phone associated with contact Henri Dupont.
if t

he telephone allows the "first name" (Henri) and "surname" (Dupont) to be entered in two separate fields, issue the following voice
commands:
-

"
Call"; "Henri"; "Dupont" or "Call"; "Dupont"; "Henri".
-

"
Search"; "Henri"; "Dupont" or "Search"; "Dupont"; "Henri".
*

T
his function is only available if the telephone connected to the system supports downloading of contacts and recent calls and if the
download has been done.
Audio System
AUDio and TELEMATiCS
10

244
jumper_en_Chap10b_Autoradio-Fiat-4_ed01-2015
"AM /FM radio" voice commands
These voice commands can be issued from any main screen page after pressing the voice recognition button on the steering wheel, as long as
there is no telephone call in progress.Level 1 Level 2Level 3
co

mment
t

u n e t o 105.5 FMTunes the radio the the frequency 105.5 on the FM
waveband.
t

u n e t o 940 AMTunes the radio the the frequency 940 on the AM
waveband.
t

u n e t o * FIP FMTunes the radio the the station F
iP

.
* The name "F
iP

" can be replaced by any other FM station name received by the radio. n
o
t all radio stations provide this service.
Audio System