2016 Citroen GRAND C4 PICASSO RHD instrument panel

152
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. S peed   limiter   mode   selection   indication.
8.
 S

peed   limiter   setting.
Speed limiter - "LIMIT"
System which prevents the vehicle from exceeding the speed programmed by the driver.
The speed limiter cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
Once the programmed speed limit is reached, additional   pressure   on   the   accelerator   pedal  
h

as   no   effect.
1.
 S

elect   speed   limiter   mode.
2.
 L

ower   programmed   speed.
3.
 R

aise   programmed   speed.
4.
 S

peed   limiter   on   /   pause.
5.
 D

isplay   the   list   of   memorised   speeds   or,
 D

isplay   the   list   of   memorised   speeds.Displays in the instrument panel
Switching on  the   speed   limiter   requires  a
  programmed   speed   of   at   least   20   mph  
(

30 km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
The
  programmed   speed   remains   in   the
 m

emory   when   the   ignition   is   switched   off.For
  more   information   on   Memorising speeds,
refer
  to   the   corresponding   section.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Driving

153
Switching on / Pause
F Turn  thumbwheel   1 to the "LIMIT"  position:  t
he   speed   limiter   mode   is   selected   but   is  
n

ot   switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4,
  if   the   speed   displayed  
i

s   suitable   (by   default,   the   last   speed  
pro

grammed).
F
 
Y
ou   can   temporarily   stop   the   speed   limiter  
b

y   pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You
  do   not   have   to   switch   the   speed   limiter   on  i
n   order   to   set   the   speed.
Once
  the   function   is   selected,   you   can   modify  
t

he   speed   setting   by:
-
 
u
sing   buttons   2   and   3,
  raising   or   lowering  
t

he   speed   displayed   :
F
 
b
y   successive   short   presses,   to   modify  
b

y   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  value   is   then   displayed   in   the   instrument  
pan

el.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
4
Driving

155
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selection   indication.
8.
 Spe

ed
 s
etting.
Cruise control - "CRUISE"
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control system cannot, in any circumstances, replace the need to observe speed limits, nor can it replace the need for vigilance on the part of the driver.
Y ou   are   advised   to   keep   your   feet   near   the   pedals   at   all   times.
Switching on the cruise control requires a
minimum   vehicle   speed   of   25   mph   (40   km/h).
As
  well   as   engagement   of:
-
 
f
ourth   gear   or   higher   on   a   manual   gearbox,
-
 
s
econd   gear   or   higher   in   manual   mode   on  
a

n   automatic   gearbox,
-
 
p
osition   D   on   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
The cruise control is paused
 

by   pressing  
b

utton 4   or   the   brake   pedal   or   on   triggering   of  
t

he   ESC   system   for   safety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the  
p

rogrammed   cruise   speed   is   reached   again.1.
 S

elect   cruise   control   mode.
2.
 S

et   the   current   speed   of   the   vehicle  
a

s   the   programmed   speed   /   Lower   the  
pro

grammed
 s
peed.
3.
 S

et   the   current   speed   of   the   vehicle  
a

s   the   programmed   speed   /   Raise   the  
pro

grammed
 s
peed.
4.
 P

ause   /   resume   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds   or,
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.Displays in the instrument panel
Switching off the ignition cancels any programmed   speed   value. For
  more   information   on   Memorising speeds
,
refer   to   the   corresponding   section.
For   more   information   on   Speed limit
recognition
 
and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
4
Driving

156
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn  thumbwheel   1 to the "0" p osition. T
he   display   of   information   related   to   the  
c

ruise   control   disappears.
Switching on
Once the cruise control is switched on, you can   modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F
 
b
y   successive   short   presses,   to   modify  
t

he   speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F
 
T

urn
 
thumbwheel
 
1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  value   is   then   displayed   in   the   instrument  
pan

el.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Pause
You can pause the cruise control at any time by   pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving

159
The dynamic cruise control is switched on
m anually:   it   requires   that   the   speed   of   the  
v

ehicle   be   between   25   and   90   mph   (40   and  
1

50 km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   or   higher   with   a   manual  
g

earbox,
-
 
s
econd   gear   or   higher   with   an   automatic  
g

earbox   in   manual   mode,
-
 
p
osition   D   with   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
General points
The dynamic cruise control can be paused
m anually o r a utomatically:
-
 
b
y   pressing   button   4,
-
 
b
y   pressing   the   brake   pedal,
-
 
i
n   the   event   of   operation   of   the   ESC,   for  
s

afety reasons,
-
 
i
n   the   event   of   operation   of   the   electric  
p

arking   brake   control   lever,
-
 
w
hen   an   inter-vehicle   time   threshold   is  
r

eached   (calculated   according   to   the  
r

elative   speeds   of   your   vehicle   and   the  
v

ehicle   in   front   and   the   inter-vehicle   time  
se

tting
 c
hosen),
-
 
w
hen   the   distance   between   your   vehicle  
a

nd   the   one   in   front   becomes   too   small,
-
 
w
hen   the   speed   of   the   vehicle   in   front   is   too  
l

ow,
-
 
w
hen   the   speed   of   your   vehicle   becomes  
t

oo   low.
The
 

dynamic
 

cruise
 

control
 

cannot
 

in
 

any
 c

ircumstances
 
replace
 
the
 
observation
 o

f
 sp

eed
 l

imits,
 n

or
 t

he
 n

eed
 fo

r
 v

igilance
 o

n
 
the
 
part
 
of
 
the
 
driver.
It
 
is
 
recommended
 
that
 
you
 
always
 
keep
 y

our
 
feet
 
close
 
to
 
the
 
pedals.
If
 
the
 
speed
 
setting
 
selected
 
is
 
above
 
9

0
 
mph
 
(150
 
km/h),
 
the
 
system
 
switches
 
t

o
 
standard
 
cruise
 
control
 
operation,
 
w

ith
 
no
 
adjustment
 
of
 
the
 
inter-vehicle
 
s

afe
 
distance
 
(a
 
message
 
appears
 
in
 
t

he
 
instrument
 
panel). The
  inter-vehicle   time   setting   is   kept   in  
m

emory   on   switching   off   the   ignition.
The
 
dynamic
 
cruise
 
control
 
operates
 
by
 
d

ay
 
and
 
at
 
night,
 
in
 
fog
 
or
 
in
 
moderate
 
r

ainfall.
The system does not act on the braking s ystem,   but   works   only   with   engine   braking.
The
  regulation   range   is   limited:   there   will
 n

o   longer   be   any   adjustment   of   speed   if   the
 d

ifference   between   the   programmed   speed
 s

etting   and   the   speed   of   the   vehicle   in   front
 b

ecomes   too   high   (18   mph   (30   km/h)).
If the difference between the programmed   speed   setting   and   the  
s

peed   of   the   vehicle   in   front   is   too  
g

reat,   the   speed   cannot   be   adjusted:  
t

he   cruise   control   is   automatically  
d

eactivated.
4
Driving

160
1. Select  cruise   control   mode.
2. U se   the   current   speed   of   the   vehicle   as  
t

he   cruise   speed   setting   /   Lower   the   speed  
se

tting.
3.
 U

se   the   current   speed   of   the   vehicle   as  
t

he   cruise   speed   setting   /   Raise   the   speed  
se

tting.
4.
 P

ause   /   Resume   the   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds,   or
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
 S

elect   the   inter-vehicle   distance   ("Close ",
" Normal ", "Distant ")
For
  more   information   on   Memorising speeds,
refer
  to   the   corresponding   section.
For
  more   information   on   Speed limit
recognition
 

and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Steering mounted controls
Switching on
The active cruise   control   must   be   selected   in  t
he Driving  menu.
F
 
T
urn   the   thumbwheel   1 to the "CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   is   paused.
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed   of   your   vehicle   becomes   the   cruise  
s

peed   setting.
The
  cruise   control   is   activated   (ON).
By
  default,   the   inter-vehicle   time   is   set   at  
2 s

econds.
Other wise,
  the   last   speed   value   set   will   be   used  
f

or   operation   of   the   system.
Modification of the cruise control
speed
- using  buttons   2   or   3:
F  b y   successive   short   presses,   to   modify  
b

y   steps   of   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speed   settings   are  
d

isplayed   in   the   touch   screen   tablet,
F
 
c
hoose   a   speed   setting:   it   is   displayed   in  
t

he   instrument   panel.
The selection screen closes after a few
moments.
  The   modification   is   then   taken   into  
a

ccount.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  speed   setting   is   then   displayed   in   the  
in

strument
 pan
el.
As
 
a
 
precaution,
 
it
 
is
 
recommended
 
that
 
y

ou
 
select
 
a
 
speed
 
setting
 
close
 
to
 
the
 
c

urrent
 
speed
 
of
 
your
 
vehicle.
Operation
For more information on Speed limit
re cognition  and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Driving

161
In the event of the presence of a
vehicle  detected   by   the   radar,   if   the  
s

peed   selected   is   much   higher   than  
t

he   speed   of   that   vehicle,   the   system  
i

s   not   activated   and   the   alert   message  
"

Activation   not   possible,   conditions  
u

nsuitable"   is   displayed   until   driving  
c

onditions   are   safe   to   allow   activation   of  
t

he   system.
Exceeding the speed setting
The information is grouped together in the instrument pan el.
6.
 I

ndication   of   cruise   control   pause/resume.
7.
 I

ndication   of   selection   of   cruise   control  
m

ode,   or
 v

ehicle   speed   adjustment   phase.
8.
 C

ruise   speed   setting,   or
 a

djusted   speed   lower   than   the   cruise  
se

tting.
Displays in the instrument panel
Modification of the inter-vehicle
distance
Press button 6 to choose a new inter-vehicle distance   setting   from   the   3   available   ("Close ",
" Normal ", "Distant ").
This
  value   remains   in   memory,   whatever   the  
s

tate   of   the   system.
It
  is   possible   to   exceed   the   speed   setting  
t

emporarily   by   depressing   the   accelerator  
ped

al.
Then
  simply   release   the   accelerator   pedal   to  
r

eturn   to   the   programmed   speed.
If
  the   speed   setting   is   unintentionally   exceeded,  
d

escending   a   steep   hill   for   example,   the   speed  
s

etting   in   the   instrument   panel   flashes   as   a  
w

arning.
4
Driving

162
SymbolDisplay in the
instrument panel Associated message
Comments
No
  vehicle   detected:  
t

he   system   operates   as   a   standard   cruise   control.
Detection
  of   a   vehicle,   at   the   limit   of   the   range   of   the   radar:  
t

he   system   operates   as   a   standard   cruise   control.
"SPEED ADJUSTED" Detection
  of   a   vehicle   that   is   too   close   or   running   at   a   speed   lower   than   your  
v

ehicle's   cruise   speed   setting.
The
  system   uses   engine   braking   to   slow   your   vehicle   and   then   hold   it   at   the   speed   of  
t

he   vehicle   in   front   so   as   to   maintain   the   programmed   inter-vehicle   time.
The
  regulation   range   is   limited   to   a   maximum   difference   of   20   mph   (30   km/h)  
b

etween   the   speed   setting   and   the   speed   of   the   vehicle   ahead.
"SPEED ADJUSTED" When
  the   adjusted   speed   reaches   the   control   limit   (speed   setting   -   20   mph  
(

30 km/h)),   the   adjusted   speed   flashes   together   with   the   speed   setting,   to   signal   that  
a

utomatic   deactivation   of   the   system   is   imminent.
"Cruise control
paused" If
  the   system   exceeds   the   limit   of   speed   adjustment   possible   by   the   system   and  
i

n   the   absence   of   any   reaction   by   the   driver   (operation   of   the   direction   indicator,  
c

hange   of   lane,   reduction   of   the   speed   of   the   vehicle),   the   system   is   automatically  
pa

used.
The
  display   of   the   deactivation   message   is   accompanied   by   an   audible   signal.
Driving situations and associated alerts
The table below describes the alerts and the messages displayed for the different driving situations.
T he   display   of   these   alerts   is   not   sequential.
Driving