2016 Citroen GRAND C4 PICASSO RHD cruise control

162
SymbolDisplay in the
instrument panel Associated message
Comments
No
  vehicle   detected:  
t

he   system   operates   as   a   standard   cruise   control.
Detection
  of   a   vehicle,   at   the   limit   of   the   range   of   the   radar:  
t

he   system   operates   as   a   standard   cruise   control.
"SPEED ADJUSTED" Detection
  of   a   vehicle   that   is   too   close   or   running   at   a   speed   lower   than   your  
v

ehicle's   cruise   speed   setting.
The
  system   uses   engine   braking   to   slow   your   vehicle   and   then   hold   it   at   the   speed   of  
t

he   vehicle   in   front   so   as   to   maintain   the   programmed   inter-vehicle   time.
The
  regulation   range   is   limited   to   a   maximum   difference   of   20   mph   (30   km/h)  
b

etween   the   speed   setting   and   the   speed   of   the   vehicle   ahead.
"SPEED ADJUSTED" When
  the   adjusted   speed   reaches   the   control   limit   (speed   setting   -   20   mph  
(

30 km/h)),   the   adjusted   speed   flashes   together   with   the   speed   setting,   to   signal   that  
a

utomatic   deactivation   of   the   system   is   imminent.
"Cruise control
paused" If
  the   system   exceeds   the   limit   of   speed   adjustment   possible   by   the   system   and  
i

n   the   absence   of   any   reaction   by   the   driver   (operation   of   the   direction   indicator,  
c

hange   of   lane,   reduction   of   the   speed   of   the   vehicle),   the   system   is   automatically  
pa

used.
The
  display   of   the   deactivation   message   is   accompanied   by   an   audible   signal.
Driving situations and associated alerts
The table below describes the alerts and the messages displayed for the different driving situations.
T he   display   of   these   alerts   is   not   sequential.
Driving

163
When the dynamic cruise control is automatically   paused,   it   can   only   be  
r

eactivated   when   safe   conditions   are  
r

estored.   The   message   "Activation  
n

ot   possible,   conditions   unsuitable"  
i

s   displayed   while   reactivation   is   not  
p

ossible.
When
  the   conditions   allow,   it   is  
r

ecommended   that   the   system   be  
r

eactivated   by   pressing   button   2 or 3,
which
  will   make   the   current   speed   of  
y

our   vehicle   the   new   cruise   speed  
s

etting,   rather   than   by   pressing   button   4
(on/pause)
  which   reactivates   the   system  
u

sing   the   old   cruise   speed   setting,  
w

hich   may   be   very   different   from   the  
c

urrent   speed   of   your   vehicle. The
  dynamic   cruise   control   uses   only   engine  b
raking   to   slow   the   vehicle.   Consequently   the  
v

ehicle   loses   speed   slowly,   as   when   releasing  
t

he   accelerator   pedal.
The
  system   is   paused   automatically:
-
 
i
f   the   vehicle   in   front   slows   down   too   much  
o

r   too   suddenly,   and   the   driver   does   not  
b

rake,
-
 
i
f   a   vehicle   comes   between   your   vehicle  
a

nd   the   vehicle   in   front,
-
 
i
f   the   system   does   not   slow   the   vehicle  
e

nough   to   continue   to   maintain   a   safe  
d

istance,   for   example   when   descending   a  
s

teep   hill.
Limits of operation
As the radar's field of view is quite narrow, it is possible   that   the   system   may   not   detect:
The
  cruise   control   does   not   take   account   of:
-
 
s
tationary   vehicles,
-
 
v
ehicles   driving   in   the   opposite   direction.
-
 
v
ehicles   of   reduced   width,   such   as  
m

otorcycles,   for   example,
-
 
v
ehicles   not   running   in   the   middle   of   the  
lan

e,
-
 
v
ehicles   entering   a   corner,
-
 
v
ehicles   changing   lane   at   the   last   moment.
The
 
regulation
 
range
 
is
 
limited
 
to
 
a
 
maximum
 
d

ifference
 
of
 
20
 
mph
 
(30
 
km/h)
 
between
 
the
 
s

peed
 
setting
 
and
 
the
 
speed
 
of
 
the
 
vehicle
 
in
 
f

ront.
 
Above
 
this,
 
the
 
system
 
goes
 
into
 
pause
 
if
 
a

 
safe
 
distance
 
is
 
not
 
maintained.
Severe
 
weather
 
conditions
 
(very
 
heavy
 
r

ain,
 
accumulations
 
of
 
snow
 
in
 
front
 
o

f
 
the
 
radar)
 
can
 
inter fere
 
with
 
the
 
o

peration
 
of
 
the
 
system,
 
resulting
 
in
 
t

he
 
display
 
of
 
the
 
message
 
"SYSTEM
 
I

NACTIVE:
 
Visibility
 
reduced".
 
The
 
f

unction
 
remains
 
unavailable
 
until
 
the
 
m

essage
 d

isappears.
4
Driving

164
In the event of a fault with the dynamic cruise control,   you   are   alerted   by   an   audible   signal  
a

nd   the   display   of   the   message   "Driving   aid  
f

unctions
 f
ault".
Have
  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop. When
  the   cruise   control   is   working,   take  
c

are   if   making   a   maintained   press   on  
o

ne   of   the   cruise   control   programmed  
s

peed   modification   buttons:   this   can  
l

ead   to   a   very   quick   change   in   the  
s

peed   of   your   vehicle.
Do
  not   use   the   dynamic   cruise   control  
o

n   slippery   sur faces   or   in   heavy   traffic.
When
  descending   a   steep   hill,   the  
c

ruise   control   may   not   be   able   to  
p

revent   the   vehicle   from   exceeding   the  
pro

grammed
 s
peed.
When
  ascending   a   steep   hill   or   when  
t

owing,   it   might   not   be   possible   to   attain  
o

r   maintain   the   programmed   speed.
Operating fault
The operation of the radar, located in the   front   bumper,   may   be   disturbed   by  
a

ccumulations   of   grime   (dust,   mud...)  
o

r   in   certain   weather   conditions   (snow,  
i

ce...).
The
  message   "SYSTEM   INACTIVE:  
V

isibility   reduced"   is   displayed   to   signal  
t

hat   the   system   has   been   put   into  
s

t a n dby.
Clean
  the   front   bumper   regularly.
The
 
use
 
of
 
mats
 
not
 
approved
 
by
 
C

ITROËN
 
may
 
inter fere
 
with
 
the
 
o

peration
 
of
 
the
 
cruise
 
control.
To
 
avoid
 
any
 
risk
 
of
 
jamming
 
the
 
pedals:
-
 
e

nsure
 
that
 
mats
 
are
 
secured
 
c

o r r e c t l y,
-
 
n

ever
 
fit
 
one
 
mat
 
on
 
top
 
of
 
another.
Driving

165
Dynamic cruise control with Stop function
The dynamic cruise control is a driving aid   that   cannot   in   any   circumstances  
r

eplace   the   observation   of   speed   limits  
a

nd   safe   distances,   nor   the   need   for  
v

igilance   on   the   part   of   the   driver.
It
 
i
s  
r
ecommended   that  
y
ou   always  
k
eep  
y

our   feet   close   to   the   pedals.
The
  driver   must   be   ready   to   take   back  
c

ontrol   of   their   vehicle   at   any   time,  
u

sing   the   brake   or   accelerator   pedal   as  
a

ppropriate.
This
 
system
 
assures
 
two
 
functions:
-
 
a

utomatic
 
regulation
 
of
 
the
 
speed
 
of
 
the
 v
ehicle
 
to
 
a
 
value
 
programmed
 
by
 
the
 d
river,
-
 
a

utomatic
 
adjustment
 
of
 
the
 
distance
 
b

etween
 
your
 
vehicle
 
and
 
the
 
vehicle
 
a

head.
It
 
manages
 
the
 
acceleration
 
and
 
deceleration
 
o

f
 
the
 
vehicle
 
by
 
automatically
 
acting
 
on
 
the
 
e

ngine
 
and
 
the
 
braking
 
system.
To
 
do
 
this,
 
the
 
system
 
has
 
a
 
radar,
 
located
 
in
 
t

he
 
middle
 
of
 
the
 
front
 
bumper,
 
with
 
a
 
maximum
 
r

ange
 
of
 
150
 
metres.
Principles
This system detects a vehicle running in front of y our   vehicle,   travelling   in   the   same   direction.
It
  automatically   adapts   the   speed   of   your  
v

ehicle   to   that   of   the   vehicle   in   front,   to   maintain  
a

  constant   distance.
If
  the   vehicle   in   front   is   running   more   slowly,   the  
s

ystem   slows,   or   even   stops   your   vehicle,   using  
e

ngine   braking   and   the   braking   system.
If
  the   braking   system   is   used   to   decelerate   the  
v

ehicle,   the   brake   lamps   come   on.
If
  the   vehicle   in   front   accelerates   or   changes  
l

ane,   the   cruise   control   progressively  
a

ccelerates your vehicle to return to the
programmed
 s

peed.
If
  the   driver   operates   a   direction   indicator   to  
ov

ertake   a   slower   vehicle,   the   dynamic   cruise  
c

ontrol   allows   your   vehicle   to   temporarily  
a

pproach the vehicle in front to assist the
overtaking
 ma

noeuvre,
 t
hough
 n
ever
 e
xceeding
 t

he   programmed   speed.
4
Driving

166
Steering mounted controls
1. Select  cruise   control   mode.
2. U se   the   current   speed   as   the   speed  
s

etting /   Lower   the   speed   setting.
3.
 U

se   the   current   speed   as   the   speed  
s

etting /   Raise   the   speed   setting.
4.
 P

ause   /   Resume   cruise   control.
5.
 U

se   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
 D

isplay   and   adjust   the   inter-vehicle  
d

istance
 s
etting.
For
  more   information   on   Speed limit
recognition
 

and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Displays in the instrument panel
7. Indication  of   the   presence   /   absence   of   a  t
arget   vehicle.
8.
 I

ndication   of   cruise   control   activation   /  
d

eactivation.
9.
 Spe

ed
 s
etting.
10.
 I

ndication   that   vehicle   is   held   stationary.
11.
 S

peed   suggested   by   the   speed   limit  
r

ecognition   system.
If
  a   vehicle   is   detected,   the   symbol   7 is   filled  
w

ith   the   colour   associated   with   the   cruise  
c

ontrol   mode.   By   default,   the   symbol   7 is
e m pt y.
In
  cruise   control   activated   mode,   the   symbol 8
appears
  in   green.   By   default,   the   symbol   8
appears
  in   grey. 12 . I
nter-vehicle d istance se tting.
13. P osition   of   the   vehicle   detected   by   the   radar.
This
  information   is   visible   in   the   instrument  
p

anel   in   "Driving"   display   mode.
Driving

167
Switching on
The cruise control is switched on manually, i
t   requires   a   vehicle   speed   of   between   18   and  
1

12 mph   (30   and   180   km/h).
An
  automatic   gearbox   must   be   in   position   D
or M . Other wise,
  the   last   setting   made   will   be   used  
w

hen   switching   on   the   system.
Switching   off   the   ignition   cancels   any  
p

rogrammed   speed   setting.
When   the   cruise   control   is   operating,  S
top   &   Start   is   automatically  d
eactivated.
Pause
The dynamic cruise control can be paused
m anually b y:
-
 
a
ction   by   the   driver:
●
 
o
n   button   4,
●
 
o
n   the   brake   pedal,
●
 
o
n   the   electric   parking   brake   control,
●
 
w
hen   changing   from   D to N with an
automatic
  gearbox.
-
 
o
r   automatically,   if   operation   of   the   ESC  
s

ystem   is   triggered   for   reasons   of   safety.
Following
  braking   of   the   vehicle  
b

ringing   it   to   a   complete   stop,   the  
s

ystem   holds   the   vehicle   stationary   ;  
t

he   cruise   control   is   paused.   The   driver  
s

hould   press   the   accelerator   pedal   to  
m

ove   off,   then   reactivate   the   system  
b

y   exceeding   18   mph   (30   km/h)   and  
p

ressing   button   2, 3 or 4 .
If
  the   driver   takes   no   action   following  
t

his   immobilisation,   the   electric   parking  
b

rake   is   applied   automatically   after   a  
f

ew
 m
inutes.
F
 
W

ith
 
the
 
ignition
 
on,
 
turn
 
the
 
thumbwheel 1
to the " CRUISE "
 
position:
 
cruise
 
control
 
m

ode
 
is
 
selected,
 
but
 
not
 
started
 
(grey).
F
 
V

ehicle
 
moving,
 
press
 
one
 
of
 
the
 
buttons 2
or 3 :
 
the
 
current
 
speed
 
of
 
your
 
vehicle
 
b

ecomes
 
the
 
cruise
 
speed
 
setting.
The
 
cruise
 
control
 
is
 
activated
 
(green).
By
 
default,
 
the
 
inter-vehicle
 
distance
 
is
 
set
 
at
 
" No

rmal "
 
(2
 
dashes).
4
Driving

168
When the cruise control is paused, it   can   only   be   reactivated   when   all   of  
t

he   safety   conditions   are   met.   The  
m

essage   "Activation   not   possible,  
c

onditions  
u
nsuitable"  
i
s  
d
isplayed  
w
hile  
r

eactivation   is   not   possible.
Wait
  until   the   speed   of   the   vehicle  
i

s   close   to   the   speed   setting   before  
r

eactivating   the   system   -   by   pressing  
b

utton 2 or 3   -   in   order   to   set   your  
c

urrent   speed   as   the   new   speed   setting.
Modification of the speed setting
Modification from the speed limit
recognition system
F The  speed   to   be   memorised   is   displayed   in  t
he   instrument   panel.
F
 
M
ake   an   initial   press   on   button   5;
  a  
m

essage   is   displayed   to   confirm   the  
m

emorisation
 r
equest.
F

P
ress button 5   again   to   save   the   suggested  
s

peed.
The
  speed   is   then   displayed   in   the   instrument  
p

anel   as   the   new   speed   setting.
As
  a   precaution,   it   is   recommended   that  
y

ou   select   a   cruise   speed   setting   close  
t

o   the   current   speed   of   your   vehicle,   so  
a

s   to   avoid   any   sudden   acceleration   or  
d

eceleration   of   the   vehicle.
For
  more   information   on   Speed limit
recognition
 

and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Engine
 
running
 
and
 
cruise
 
control
 
on
 
(green),
 
y

ou
 
can
 
modify
 
the
 
speed
 
setting.
Modification from the current
speed
F By successive short presses on button 2 or 3,
  to   raise   or   lower   the   setting   in   steps  
of
  +   or   -    1   mph   (km/h),
F
 
B
y   a   maintained   press   on   button   2 or 3,
to
  raise   or   lower   the   setting   in   steps  
of
  +   or   -   5   mph   (km/h).
Take
  care:   a   prolonged   press   on  
b

utton 2 or 3   will   cause   a   very   quick  
c

hange   in   the   speed   of   your   vehicle.
Driving

169
Modification of the inter-vehicle distance setting
Three predefined inter-vehicle distance settings are   offered:
-
 
"
Distant"
 
(3   dashes),
-
 
"
Normal"
 
(2   dashes),
-
 
"
Close"
 
(1   dash). Engine
  running   and   cruise   control   selected  
(

grey),   you   can   modify   the   inter-vehicle  
d

istance
 s
etting:
F
p
ress button 6   to   display   the   selection  
s

creen   for   inter-vehicle   distance,
F
p
ress button 6   repeatedly   to   cycle   through  
t

he   predefined   settings.
The selection screen closes after a few
seconds.
The   modification   is   then   taken   into   account.
This   setting   remains   in   memory,   whatever   the  
s

tate   of   the   system   and   when   the   ignition   is  
s

witched   off.
It
 
is
 
possible
 
to
 
exceed
 
the
 
speed
 
setting
 
t

emporarily
 
by
 
depressing
 
the
 
accelerator
 
ped

al.
The
 
cruise
 
control
 
no
 
longer
 
manages
 
the
 
b

raking
 
system
 
during
 
this
 
period.
Simply
 
release
 
the
 
accelerator
 
pedal
 
to
 
return
 
t

o
 
the
 
programmed
 
speed.
If
 
the
 
programmed
 
speed
 
setting
 
is
 
exceeded,
 
t

he
 
display
 
of
 
the
 
speed
 
setting
 
disappears
 
a

nd
 
a
 
message
 
"Cruise
 
control
 
suspended"
 i
s
 
displayed
 
until
 
the
 
accelerator
 
pedal
 
is
 r
eleased.
Exceeding the programmed
setting
4
Driving