2016 Citroen DS3 RHD sensor

9
Under-inflation detection
This sytem automatically checks the tyre pressures   when   driving   and   warns   you   in  
t

he event   of   an   under-inflated   tyre.
15 4
203
Temporary puncture repair kit
This kit is a complete system consisting o f   a   compressor   and   sealant   cartridge,   for  
t

he temporary   repair   of   a   tyre.
Exterior
132
Parking sensors
This system provides a warning when manoeuvring   by   detecting   obstacles   near  
t

he vehicle. 13 4
Reversing camera
This system is activated automatically when r
everse   gear   is   engaged,   providing   an   image   in  
t

he   display   screen.
Over view

43
Radio- Cd
With the Audio system switched on, once the "Radio- CD"   menu   has   been   selected   you   can  
a

ctivate   or   deactivate   the   functions   associated  
w

ith   use   of   the   radio   (RDS,   REG),   or   the   CD  
(

introscan,   shuffle,   CD   repeat).
For
  more   information   on   the   "Radio- CD"  
a

pplication,   refer   to   the   "Audio   system"   section.
Vehicle configuration
Once the " Vehicle Configuration" menu has been   selected,   you   can   activate   or   deactivate  
t

he   following   equipment:
-
 
w
iper   linked   with   reverse   gear   (refer   to   the  
"

Visibility"
 s
ection),
-
 
g
uide-me-home   lighting   (refer   to   the  
"

Visibility"
 s
ection),
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
Options
Once the "Options" menu has been selected, you   can   start   diagnostics   of   the   status   of   the  
e

quipment   (active,   not   active,   faulty).
This menu is also used to reinitialise the tyre under-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
Monitoring

47
"Personalisation-
Configuration" menu
Once this menu has been selected, you can gain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility"
 s
ection),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o   the   " Visibility"   section), Example:
  setting   of   the   duration   of   the   guide-
me-home
 l
ighting
F
P
ress the "
5" or " 6" buttons, then the
"OK"  button   to   select   the   menu   required.F
P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value   required   (15,   30   or   60   seconds),   then  
p

ress the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   the   "Driving"  
s

ection),
-  
a
utomatic   emergency   braking   (refer   to   the  
"

Active   City   Brake"   section).
Monitoring

49
Touch screen tablet
This system gives access to:
-  m enus   for   adjusting   settings   for   vehicle  
f

unctions   and   systems,
-
 
a
udio   and   display   configuration   menus,
-
 
a
udio   system   and   telephone   controls   and  
t

he   display   of   associated   information,
-
 
t
he   display   of   alert   messages,
-
 
t
he   display   of   ambient   temperature   (a   blue  
s

now   flake   appears   if   there   is   a   risk   of   ice),
-
 
t
he   trip   computer.
And,
  depending   on   equipment,   it   allows:
-
 
t
he   display   of   the   visual   parking   sensors  
i

nformation,
-
 
a
ccess   to   the   controls   for   the   navigation  
s

ystem   and   Internet   services,   and   the  
d

isplay   of   associated   information. After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
As
  a   safety   measure,   some   functions  
c

an   only   be   viewed   when   stationary.  
T

heir   display   is   interrupted   as   soon   as  
t

he   vehicle   moves   off.general operation
Recommendations
It is necessary to press firmly, particularly for "flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do
  not   touch   the   touch   screen   tablet   with   wet  
han

ds.
Uses a soft clean cloth to clean the touch
screen
 t

ablet.
Principles
Press the " MEn U" button for access to the
different   menus,   then   press   the   virtual   buttons  
i

n   the   touch   screen   tablet.
Each
  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
Use the " O
PTIO
nS"
  button   to   go   to   the  
s

econdary
 pag
e.
Use this button for access to
additional
  information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use this button to return to the
primary
  page   or   to   quit.
Monitoring

51
"driving" menu
ButtonCorresponding function Comments
di

agnostic Recap
  of   current   alerts.
Under-inflation initialisation Reinitialisation
  of   tyre   pressures.
Refer
  to   the   "Safety"   section.
Vehicle settings Access
  to   other   functions   with   settings   that   can   be   adjusted.   The   functions   are   grouped  
t

ogether   under   three   tabs:
-
 
"dr
iving assistance"
-
 
"
Automatic   rear   wiper   in   reverse"   (Activation   of   rear   wiper   coupled   to   reverse   gear;   see  
t

he   " Visibility"   section).
-
 
"
Parking   sensors"   (Activation   of   rear   parking   sensors;   refer   to   the   "Driving"   section).
-
 
"
Auto   emergency   braking"   (Active   City   Brake;   refer   to   the   "Safety"   section).
-
 
"L

ighting"
-
 
"
Mood   lighting"   (refer   to   the   " Visibility"   section).
-
 
"
Guide-me-home   lighting"   (Automatic   guide   me   home   lighting;   refer   to   the   " Visibility"  
s

ection).
Select
  or   deselect   the   tabs   at   the   bottom   of   the   screen   to   display   the   functions   required.
The
  functions   accessible   in   this   menu   are   given   in   the   table   below.
Monitoring

Rear view mirror
Manual day/night model
Adjustment
F Adjust  the   mirror   so   that   the   glass   is  d
irected   correctly   in   the   "day"   position.
day / night position
F Pull  the   lever   to   change   to   the   "night"   anti-
dazzle   position.
F
 
P
ush   the   lever   to   change   to   the   normal  
"

day"   position. By
  means   of   a   sensor,   which   measures   the  
l

ight   from   the   rear   of   the   vehicle,   this   system  
a

utomatically   and   progressively   changes  
b

etween   the   day   and   night   uses.
Automatic day/night model
In order to ensure optimum visibility d
uring   your   manoeuvres,   the   mirror  
l

ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Equipped
 
with
 
an
 
anti-dazzle
 
system,
 
which
 
d

arkens
 
the
 
mirror
 
glass
 
and
 
reduces
 
the
 
n

uisance
 
to
 
the
 
driver
 
caused
 
by
 
the
 
sun,
 
h

eadlamps
 
from
 
other
 
vehicles...
As
 
a
 
safety
 
measure,
 
the
 
mirrors
 
s

hould
 
be
 
adjusted
 
to
 
reduce
 
the
 
blind
 
s

pots.

Recommendations for ventilation and air conditioning
If after an extended stop in sunshine, the   interior   temperature   is   very  
h

igh,   first   ventilate   the   passenger  
c

ompartment   for   a   few   moments.
Put
  the   air   flow   control   at   a   setting   high  
e

nough   to   quickly   change   the   air   in   the  
p

assenger
 c
ompartment.
The
  air   conditioning   system   does   not  
c

ontain   chlorine   and   does   not   present  
a

ny   danger   to   the   ozone   layer.
In
 
order
 
for
 
these
 
systems
 
to
 
be
 
fully
 
effective,
 
follow
 
the
 
operation
 
and
 
maintenance
 g
uidelines belo
w:
F
 
T

o
 
obtain
 
an
 
even
 
air
 
distribution,
 
take
 
care
 
not
 
to
 
obstruct
 
the
 
exterior
 
air
 
intake
 
grilles
 
l

ocated
 
at
 
the
 
base
 
of
 
the
 
windscreen,
 
the
 
nozzles,
 
the
 
vents
 
and
 
the
 
air
 
outlets,
 
as
 
well
 
a

s
 
the
 
air
 
extractor
 
located
 
in
 
the
 
boot.
F
 
D

o
 
not
 
cover
 
the
 
sunshine
 
sensor,
 
located
 
on
 
the
 
dashboard;
 
this
 
is
 
used
 
for
 
regulation
 
o

f
 
the
 
air
 
conditioning
 
system.
F
 
O

perate
 
the
 
air
 
conditioning
 
system
 
for
 
at
 
least
 
5
 
to
 
10
 
minutes,
 
once
 
or
 
twice
 
a
 
month
 
t

o
 
keep
 
it
 
in
 
per fect
 
working
 
order.
F
 
E

nsure
 
that
 
the
 
passenger
 
compartment
 
filter
 
is
 
in
 
good
 
condition
 
and
 
have
 
the
 
filter
 
e

lements
 
replaced
 
regularly.
 W

e
 
recommend
 
the
 
use
 
of
 
a
 
combined
 
passenger
 
compartment
 
filter.
 
Thanks
 
to
 
its
 
s

pecial
 
active
 
additive,
 
it
 
contributes
 
to
 
the
 
purification
 
of
 
the
 
air
 
breathed
 
by
 
the
 
o

ccupants
 
and
 
the
 
cleanliness
 
of
 
the
 
passenger
 
compartment
 
(reduction
 
of
 
allergic
 
s

ymptoms,
 
bad
 
odours
 
and
 
greasy
 
deposits).
F
 
T

o
 
ensure
 
correct
 
operation
 
of
 
the
 
air
 
conditioning
 
system,
 
you
 
are
 
also
 
advised
 
to
 
have
 
i

t
 
checked
 
regularly
 
as
 
recommended
 
in
 
the
 
maintenance
 
and
 
warranty
 
guide.
F
 
I

f
 
the
 
system
 
does
 
not
 
produce
 
cold
 
air,
 
switch
 
it
 
off
 
and
 
contact
 
a
 
CITROËN
 
dealer
 
or
 
a

 
qualified
 
workshop.
When
 
towing
 
the
 
maximum
 
load
 
on
 
a
 
steep
 
gradient
 
in
 
high
 
temperatures,
 
switching
 
off
 
the
 
a

ir
 
conditioning
 
increases
 
the
 
available
 
engine
 
power
 
and
 
so
 
improves
 
the
 
towing
 
ability. The
  condensation   created   by   the   air  
c

onditioning   results   in   a   discharge  
o

f   water   under   the   vehicle   which   is  
p

er fectly   normal.

121
F Select position d for automatic c hanging o
f   the   six   gears.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  
t

he   profile   of   the   road   and   the   load   in   the  
v

ehicle.
For
  maximum   acceleration   without   touching  
t

he   selector,   press   the   accelerator   pedal   down  
f

ully   (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On
  braking,   the   gearbox   changes   down  
a

utomatically   to   provide   efficient   engine  
b

raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
Automatic operation
Never select position n while the
v ehicle   is   moving.
Never select positions P or R unless
the
  vehicle   is   completely   stationary.
Reverse
When selecting reverse R   with   the   ignition   on,  t
he   rear   parking   sensors   are   activated.
For
  more   information,   refer   to   the   "Rear   parking  
sen

sors"
 se
ction.
Creep function (moving without
using the accelerator)
This function provides great flexibility in manoeuvring   the   vehicle   at   low   speed   (when  
p

arking,   in   traffic   jams,   …).
With
  the   engine   at   idle,   parking   brake   released  
a

nd   position  d
,
M or R  
s
elected,
 t
he vehicle
moves
 

as   soon   as   you   take   your   foot   off  
t

he   brake   pedal   (even   without   pressing   the  
a

ccelerator).
For
  your   safety,   this   function   will   be   activated  
o

nly   if   you   press   the   brake   pedal   when  
c

hanging   from   for ward   drive   to   reverse.
It
  is   deactivated   on   opening   the   driver's   door.
Closing
  the   door   then   pressing   the   brake   or  
a

ccelerator   pedal,   reactivates   the   function.
driving