2016 Citroen DS3 RHD audio

1
19
Pairing a Bluetooth®
telephone
Procedure (short) from the
telephone
In the Bluetooth menu of your device, select the s
ystem   name   in   the   list   of   devices   detected.
Enter
  a   code   of   at   least   4   figures   in   the   device  
a

nd   confirm. Enter
  this   same   code   in   the   system,  
s

elect "OK"
  and   confirm.
Procedure from the system
Activate the telephone's Bluetooth function and   ensure   that   it   is   "visible   to   all"   (telephone  
c

onfiguration). Press on Telephone
 

to   display   the  
p

rimary
 pag
e.
Press
  on   the   secondary   page.
Select " Bluetooth connection ".
Select Search for devices .
The
  list   of   telephones   detected   is  
d

isplayed. Select
  the   name   of   the  d
esired   peripheral   from   the  
l

ist   and   "Confirm ".
Enter
  a   code   of   at   least   4   figures   for  
t

he connection then "Confirm".
Enter
  this   same   code   in   the   telephone   then  
a

ccept   the   connection.
The
  system   offers   to   connect   the   telephone:
-
 
i
n   "Telephone "
  (hands-free   kit,   telephone  
o

nly),
-
 
i
n   "Audio streaming "
  (streaming:   wireless  
p

laying   of   audio   files   from   the   telephone),
-
 
i
n   "Internet "
  (internet   browsing,   only   if   your  
t

elephone   is   compatible   with   the   "DUN"  
D

ial-Up   Networking   Bluetooth   standard).
Select
  one   or   more   profiles   and   confirm.
If
  the   telephone   is   not   detected,   it   is  
r

ecommended   that   you   switch   the  
B

luetooth function on your telephone
off
  and   then   on   again.
For
 
reasons
 
of
 
safety
 
and
 
because
 
they
 r
equire
 
prolonged
 
attention
 
on
 
the
 
part
 o
f
 
the
 
driver,
 
the
 
operations
 
for
 
pairing
 
t

he
 
Bluetooth
 
mobile
 
telephone
 
to
 
the
 
h

ands-free
 
system
 
of
 
the
 
audio
 
system
 
m

ust
 
be
 
carried
 
out
 
with
 
the
 
vehicle
stationary .

1
19
335
The services available depend on the   network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith   only   one   profile   depends   on   the  
t

elephone.   The   three   profiles   may   all  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help, ...).
The
  recognised   telephone  
a

ppears   in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on. On return to the vehicle, if the last telephone
connected
  is   present   again,   it   is   reconnected  
a

utomatically   and   within   around   30   seconds  
a

fter   switching   on   the   ignition   the   pairing   is  
d

one   without   any   action   on   your   part,   with  
(

Bluetooth
 a
ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.
Depending
  on   the   type   of   telephone,  t
he   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone c
onnected   when   the   ignition   was   last   switched  
o

ff   is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to   display   the  p
rimary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth "
  to   display   the   list  
o

f   paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search for devices ".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
Audio and Telematics

3
2
3
9
14
15
16
17
18
337
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone  to   display   the  p
rimary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts / entries
Press on Telephone  to   display   the  p
rimary pag e.
Select " Contacts ".
Select " View".
Select " Create"
 

to
 
add
 
a
 
new
 
contact.
Or "Modify "
  to   edit   the   selected   contact.
Or "
de

lete "
  to   delete   the   selected  
c

ontact.
Or "
de

lete all "
  to   delete   all   information  
f

or   the   selected   contact. Select "
By name" to view the list of
contacts.
Audio and Telematics

Frequently asked questions
The table below gives answers to the most frequently asked questions on your audio system.
Q UESTIO
nAnSW
ERSOLUTIO
n
T

he route calculation is
not
  successful. The
  navigation   settings   may   conflict   with   the   current   location  
(

exclusion   of   toll   roads   on   a   toll   motor way).Check
  the   settings   in   the   "Navigation"   menu.
The
  POIs   do   not   appear. The   POIs   have   not   been   selected.Select
  the   POIs   in   the   list   of   POIs.
The
  Risk   areas   audible  
w

arning   does   not   work.The
  audible   warning   is   not   active.Activate
  audible   warnings   in   the   "Navigation"  
m

enu.
The
  system   does   not  
s

uggest   a   detour   around  
a

n   incident   on   the   route.The
  guidance   criteria   do   not   take   account   of   TMC   messages. Select   the   "Information"   function   in   the   list   of  
g

uidance
 c
riteria.
I
  receive   a   Risk   areas   alert  
w

hich   is   not   on   my   route.Other
  than   guidance,   the   system   announces   all   Risk   areas  
p

ositioned   in   a   cone   located   in   front   of   the   vehicle.   It   may   provide  
a

n   alert   for   Risk   areas   located   on   nearby   or   parallel   roads.Zoom
  in   on   the   map   to   view   the   exact   position   of  
t

he   Risk   areas.   Select   "On   the   route"   to   no   longer  
r

eceive   alerts   other   than   guidance   or   to   reduce  
t

he   time   for   the   announcement.
navigation

339
QUESTIOnAnSWERSOLUTIOn
C

ertain
  traffic   jams   along  
t

he
 
route   are   not   indicated  
i

n
 
real
 
time. On
  starting,   it   is   several   minutes   before   the   system   begins   to  
r

eceive   the   traffic   information. Wait
  until   the   traffic   information   is   being   received  
c

orrectly   (display   of   the   traffic   information   icons  
o

n   the   map).
The
  filters   are   too   restrictive. Modify
  the   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The
 
altitude   is   not  
d

isplayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait
  until   the   system   has   completed   starting  
u

p,   so   that   there   is   GPS   coverage   of   at   least  
4

 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s   dependent   on   the   GPS   signal   reception  
c

onditions.
Audio and Telematics

Radio
QUESTIOnAnSWERSOLUTIOn
T

he
 
quality   of   reception   of  
t

he
 
radio   station   listened  
t

o
 
gradually   deteriorates  
o

r
 
the
 
stored   stations   do  
n

ot
 
function   (no   sound,  
87

.5 Mhz   is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   "RDS"   function   by   means   of   the  
s

hort-cut   menu   to   enable   the   system   to   check  
w

hether   there   is   a   more   power ful   transmitter   in  
t

he   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not  
i

ndicate   a   fault   with   the   audio   system.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I
 
cannot   find   some   radio  
s

tations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list. Press   on   the   "Update   list"   function   in   the   system  
t

o   update   the   list   of   stations   received.
Some
  radio   stations   send   other   information   in   place   of   their   name  
(

the   title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The
 
name   of   the   radio  
s

tation
 c
hanges.

341
Media
QUESTIOnAnSWERSOLUTIOn
P

layback   of   my   USB  
m

emory   stick   starts   only  
a

fter
 
a
 
very   long   wait  
(

around   2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd   limit   the   number   of   sub-folders   in   the   file  
s

tructure   on   the   memory   stick.
When
 
I

 
c
onnect  
m
y  
i
Phone  
a

s
 
telephone   and   to   the  
U

SB
 
port   at   the   same  
t

ime,
 
I
 
am   unable   to   play  
t

he
 
music   files. When
  the   iPhone   connects   automatically   as   a   telephone,   it   forces  
t

he   streaming   function.   The   streaming   function   takes   the   place  
o

f   the   USB   function   which   is   then   not   useable,   there   is   a   period  
w

ithout   sound   of   the   track   being   played   with   Apple
® players.D isconnect   and   reconnect   to   the   USB   port   (the  
U

SB   function   takes   priority   over   streaming).
Some
 
characters
 
in
 
the
 
m

edia
 
information
 
are
 
not
 
d

isplayed
 
correctly
 
while
 
p

laying. The
 
audio
 
system
 
does
 
not
 
display
 
some
 
types
 
of
 
characters. Use   standard   characters   to   name   tracks   and  
f

olders.
Playing
 
of
 
streaming
 
files
 
d

oes
 
not
 
start. The
 
peripheral
 
device
 
connected
 
does
 
not
 
support
 
automatic   play. Start   the   playback   from   the   device.
The
 
names
 
of
 
tracks
 
and
 
t

he
 
track
 
length
 
are
 
not
 
d

isplayed
 
on
 
the
 
screen
 
w

hen
 s

treaming
 a

udio. The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer
 
of
 
this   information.
Audio and Telematics

343
QUESTIOnAnSWERSOLUTIOn
T

here
 
is   a   difference   in  
s

ound
 
quality   between   the  
d

ifferent   audio   sources. For
  optimum   sound   quality,   the   audio   settings   for   Volume:,   Bass:,  
T

reble:,   Ambience   and   Loudness   can   be   adapted   to   the   different  
s

ound   sources,   which   may   result   in   audible   differences   when  
c

hanging
 s
ource. Check
  that   the   audio   settings   for   (Volume:,   Bass:,  
T

reble:,   Ambience,   Loudness)   are   adapted   to  
t

he   sources   listened   to.   It   is   advisable   to   set  
t

he   audio   functions   (Bass:,   Treble:,   Balance)   to  
t

he   middle   position,   select   the   "None"   musical  
a

mbience   and   set   the   loudness   correction   to   the  
"

Inactive"   position   in   radio   mode.
With
 
the   engine   off,   the  
s

ystem
  switches   off   after   a  
f

ew
 
minutes   of   use. When
  the   engine   is   switched   off,   the   system's   operating   time  
d

epends   on   the   state   of   charge   of   the   battery.
The
  switch-off   is   normal:   the   system   switches   to   economy   mode  
a

nd   switches   off   to   prevent   discharging   of   the   vehicle's   battery.Start
  the   vehicle's   engine   to   increase   the   battery  
c

harge.
Audio and Telematics