2016 CITROEN DS3 CABRIO ECU

(a) Universal  child   seat:   child   seat   that   can   be  i
nstalled   in   all   vehicles   using   a   seat   belt.
(b )
 
G
roup   0:   from   birth   to   10   kg.   Shells   seats  
a

nd   baby   carriers   cannot   be   installed   in   the  
f

ront
 p
assenger
 sea
t.
(c )
 
C
onsult   the   legislation   in   force   in   your  
c

ountry   before   installing   your   child   on   this  
sea

t.
(d)
 T

o   install   a   child   seat   on   a   rear   seat,  
r

ear ward   or   for ward   facing,   move   the   front  
s

eat   for ward,   then   straighten   the   backrest  
t

o   allow   enough   room   for   the   child   seat   and  
t

he   child's   legs.
(e)
 W

hen   a   rear ward   facing   child   seat   is  
i

nstalled   on   the   front   passenger   seat,  
t

he   passenger's   front   airbag   must   be  
d

eactivated.   Other wise   the   child   would   risk  
b

eing   seriously   damaged   or   killed   during  
d

eployment   of   the   airbag.   When   a   for ward  
f

acing   child   seat   is   installed   on   the   front  
p

assenger
 sea
t,
 t
he
 p
assenger's
 f
ront
 a

irbag   must   remain   active.
(f )
 A

  child   seat   with   support   leg   must   never   be  
i

nstalled
 o
n
 t
he
 c
entre
 r
ear
 p
assenger
 sea
t. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   with   a  
b

ackrest   on   a   passenger   seat.   Refit   the  
h

ead   restraint   once   the   child   seat   has  
b

een   removed.
U:
S eat suitable for the installation of a
child   seat   secured   using   a   seat   belt   and  
u

niversally   approved,   rear ward   facing   and/or  
fo

rward
 f
acing.
U(R):

a
s for U,
  with   the   passenger   seat  
a

djusted   to   its   highest   position   and   in   the  
in

termediate
 l
ongitudinal
 p
osition.

181
Advice on child seats
The incorrect installation of a child seat in a vehicle   compromises   the   child's   protection  
i

n   the   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild   seat   harness   keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
To
  install   a   child   seat   using   the   vehicle's  
s

eat belt, ensure that the belt is well
tightened
  on   the   child   seat   and   that   it   holds  
t

he   child   seat   firmly   against   the   vehicle's  
s

eat.   If   your   passenger   seat   is   adjustable,  
m

ove   it   for ward   if   necessary.
On
  the   rear   seats,   always   leave   enough  
s

pace   between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   child's   feet   when   in   a   for ward   facing  
c

hild   seat.
To
  do   this,   move   the   front   seat   for ward   and,  
i

f   necessary,   also   straighten   its   backrest.
Children at the front
The legislation on carrying a child on the front   passenger   seat   is   specific   to   each  
c

o unt r y.
Refer
  to   the   current   legislation   in   your  
c

o unt r y.
Deactivate
  the   passenger's   front   airbag  
w

hen   a   rear ward   facing   child   seat   is  
i

nstalled   on   the   front   seat.   Other wise   the  
c

hild   risks   being   seriously   injured   or   killed   if  
t

he   airbag   is   deployed.
Installation of a booster cushion
The chest part of the seat belt must be positioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes
  correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a  
b

ooster   seat   which   has   a   back,   fitted   with   a  
s

eat   belt   guide   at   shoulder   level.
As
  a   safety   precaution,   do   not   leave:
-
 
o
ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
k
eys   within   the   reach   of   children   inside  
t

he   vehicle.
Use
  the   child   lock   to   prevent   any   accidental  
o

pening   of   the   rear   doors   or   windows.
Avoid
  opening   the   rear   windows   by   more  
t

han   a   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
For
 
optimum
 
installation
 
of
 
a
 
for ward
 
facing
 c
hild
 
seat,
 
ensure
 
that
 
the
 
back
 
of
 
the
 
child
 s
eat
 
is
 
as
 
close
 
as
 
possible
 
to
 
the
 
back
 
of
 
t

he
 
vehicle's
 
seat,
 
in
 
contact
 
if
 
possible.
You
 
must
 
remove
 
the
 
head
 
restraint
 
before
 
f

itting
 
a
 
child
 
seat
 
on
 
a
 
passenger
 
seat.
 
E

nsure
 
that
 
the
 
head
 
restraint
 
is
 
stowed
 
or
 
a

ttached
 
securely
 
to
 
prevent
 
it
 
from
 
being
 
t

hrown
 
around
 
the
 
vehicle
 
in
 
the
 
event
 
of
 
s

harp
 
braking.
 
Refit
 
the
 
head
 
restraint
 
once
 
t

he
 
child
 
seat
 
has
 
been
 
removed.
Child safety

Your vehicle has been approved in accordance with the latest ISOFIX regulation.
The
  seats,   represented   below,   are   fitted   with  
r

egulation
 I
SOFIX
 m
ountings:
"ISOFIX" mountings
There are three rings for each seat: -  
a
  ring   B
,   behind   the   seat,   referred   to   as   the  
T

OP TETHER   for   securing   the   upper   strap.
The TOP TETHER   is   used   to   secure   the  
u

pper   strap   of   child   seats   that   have   one.   This  
a

rrangement   limits   the   for ward   tipping   of   the  
c

hild   seat   in   the   event   of   a   front   impact.
This
  ISOFIX   mounting   system   provides   fast,  
r

eliable   and   safe   fitting   of   the   child   seat   in   your  
v

ehicle.
-
 
t
wo   rings   A,
  located   between   the   vehicle  
s

eat   back   and   cushion,   indicated   by   a  
lab

el, The ISOFIX child seats
  are   fitted   with   two  
l

atches   which   are   secured   on   the   two   rings   A.
Some
  seats   also   have   an   upper strap which is
attached
  to   ring   B. To
  secure   the   child   seat   to   the   top   tether:
-  
r
emove   and   stow   the   head   restraint   before  
i

nstalling   the   child   seat   on   this   seat   (refit   it  
o

nce   the   child   seat   has   been   removed),
-  
p
ass   the   child   seat   strap   over   the   top   of  
t

he   backrest   of   the   seat,   keeping   it   centred  
b

etween   the   head   restraint   apertures,
-  
s
ecure   the   hook   of   the   upper   strap   to   the  
r

ing   B
,
-  
t
ighten   the   upper   strap.
When   fitting   an   ISOFIX   child   seat   to   the   right  
h

and   rear   seat,   before   fixing   the   seat   in   place,  
f

irst   move   the   centre   rear   seat   belt   towards   the  
m

iddle   of   the   vehicle   so   as   to   not   inter fere   with  t
he operation of the seat be
lt.
The   incorrect   installation   of   a   child   seat  
i

n   a   vehicle   compromises   the   child's  
p

rotection   in   the   event   of   an   accident.
Follow
  strictly   the   advice   given   in   the  
i

nstallation   instructions   provided   with  
t

he   child   seat.
Refer
  to   the   table   for   the   possibilities   for   fitting  
I

SOFIX   child   seats   in   your   vehicle.

Installing ISOFIX child seatsIn accordance with European regulations, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX m ountings.
In
  the   case   of   the   universal   and   semi-universal   ISOFIX   child   seats,   the   child   seat's   ISOFIX   size   category,   determined   by   a   letter   between   A   and  g
, i
s
indicated
  on   the   child   seat   next   to   the   ISOFIX   logo.
I UF:

s
eat suitable for the installation of an I sofix
  Universal seat, F or ward
  facing   and   secured   using  
t

he   TOP   TETHER   upper   strap.
IL- SU: seat suitable for the installation an I sofix
  Semi- Universal
  seat   which   is:
-
 
r
ear ward   facing   fitted   with   a   Top   Tether   upper   strap   or   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-
 
b
aby   cot   fitted   with   a   Top   Tether   upper   strap   or   a   support   leg.
For
  the   securing   of   the   Top   Tether   upper   strap,   refer   to   the   "ISOFIX   Mountings"   section.
X:
  s

eat   which   is   not   suitable   for   the   installation   of   an   ISOFIX   child   seat   or   cot   of   the   weight   group  
i

ndicated. Weight of the child and indicative age
Less than 10 kg (group 0)
Up
  to   6   months  
a

pproxLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   1   year   approxFrom 9 to 18 kg (group 1)
From
  1   to   3   years   approx
Type of ISOFIX child seat Infant car seatrearward facing rearward facing forward facing
ISOFIX size categor y F
gCdE CdA BB1
U

niversal and semi-universal ISOFIX child
seats which can be installed on the outer
rear seats X
XIL- SU XIL- SU IUF

IL- SU
Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   with   a  
b

ackrest   on   a   passenger   seat.   Refit   the  
h

ead   restraint   once   the   child   seat   has  
b

een   removed.

199
The speed l imit  s ticker  m ust  b e  s ecured  t
o the interior of the vehicle in the
driver's
  field   of   vision,   to   remind   you  
t

hat   a   wheel   is   in   temporary   use.
Composition of the kit
1. 12  V   compressor,   with   integral   pressure  ga
uge.
2.
 S

ealant   cartridge,   with   integral   hose.
3.
 S

peed   limit   sticker.
Temporary puncture r epair k it
Complete system consisting of a compressor a
nd   a   sealant   cartridge   which   permits  
t

emporary repair of a tyre so that you can
drive
  to   the   nearest   garage.
It
  is   designed   to   repair   most   punctures   which  
c

ould   affect   the   tyre,   located   on   the   tyre   tread  
o

r   shoulder.Access to the kit
This kit  is  installed  i n  t he  s torage  b ox,  u nder  t he  b
oot   floor.
The
  vehicle's   electric   system   allows   the  
c

onnection   of   a   compressor   for   long  
e

nough   to   inflate   a   tyre   after   a   puncture  
r

epair   or   for   inflating   a   small   inflatable  
a

ccessory. Do
  not   exceed   a   speed   of   50   mph  
(

80 km/h)   when   driving   with   a   tyre  
r

epaired   using   this   type   of   kit.
Practical information

F Switch  off   the   ignition.
F  S ecure   the   speed   limit   sticker   inside   the  
v

ehicle.
Repair procedure
Avoid removing any foreign bodies which   have   penetrated   into   the   tyre.F
 
U
ncoil   the   pipe   stowed   under   the  
c

ompressor.
F  
C
onnect   the   pipe   from   the   compressor   to  
t

he   sealant   cartridge.
F  
T
urn   the   the   sealant   cartridge   and   secure   it  
i

n   the   cut-out   provided   on   the   compressor.F  
R
emove   the   valve   cap   from   the   tyre   to   be  
r

epaired,   and   place   it   in   a   clean   area.
F  
C
onnect   the   hose   from   the   sealant  
c

artridge   to   the   valve   of   the   tyre   to   be  
r

epaired   and   tighten   firmly.

Changing a wheelProcedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
T he   tools   are   installed   in   the   boot   under   the  
f

l o o r.
To
  gain   access   to   them:
F

o
pen the boot,
F
 
l
ift   the   boot   carpet   by   pulling   the   strap  
up

wards,
F
 
r
emove   the   polystyrene   storage   box,
F
 
u
nclip   and   remove   the   box   containing   the  
to

ols.
Access to the tools
List of tools Wheel with trim
When removing the wheel
, first
detach   the   trim   using   the   wheelbrace   1
pulling
  at   the   valve   passage   hole.
When refitting the wheel , refit the
trim
  starting   by   placing   its   cut-out   at   the  
v

alve   and   press   around   its   edge   with  
t

he   palm   of   your   hand.
1.
 W

heelbrace.
 F

or
 
removing
 
the
 
wheel
 
trim
 
and
 
removing
 
t

he
 
wheel
 
fixing
 
bolts.
2.
 J

ack
 
with
 
integral
 
handle.
 F

or
 
raising
 
the
 
vehicle.
3.
 "

Bolt
 
cover"
 
tool.
 F

or
 
removing
 
the
 
bolt
 
protectors
 
(covers)
 
o

n
 
alloy
 
wheels.
4.
 S

ocket
 
for
 
the
 
security
 
wheel
 
bolts
 
(located
 
i

n
 
the
 
glove
 
box).
 F

or
 
adapting
 
the
 
wheelbrace
 
to
 
the
 
special
 
s

ecurity
 
wheel
 
bolts
 
(if
 
your
 
vehicle
 
is
 
fitted
 
w

ith
 
them). All of these tools are specific to your
vehicle.
  Do   not   use   them   for   other  
p

urposes.
Never
  use   a   jack   other   than   the  
o

ne   listed   for   the   vehicle   by   the  
m

anufacturer.   If   the   vehicle   does   not  
h

ave   one,   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop   to   obtain   a   jack  
s

pecified   by   the   manufacturer.

205
The spare wheel is installed in the boot under the   floor.
According
  to   country,   you   will   have   either   a  
"

space   saver"   spare   wheel   or   a   temporary  
p

uncture   repair   kit.
For access to it, refer to the "Access to the
tools"
 s

ection.
Access to the spare wheel
Fitting the "space-saver"
type spare wheel
If your vehicle is fitted with alloy wheels,   it   is   normal   to   notice,   when  
t

ightening   the   bolts   on   fitting,   that   the  
w

ashers   do   not   come   into   contact   with  
t

he   "space-saver"   type   spare   wheel.  
T

he   wheel   is   secured   by   the   conical  
c

ontact   sur face   of   each   bolt.
Taking out the wheel
F Unscrew  the   yellow   central   bolt.
F  R aise   the   spare   wheel   towards   you   from  
t

he   rear.
F
 
T
ake   the   wheel   out   of   the   boot.
Practical information