2016 Citroen C4 PICASSO Boot

119
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Stowing behind the 3rd row seats
To fold the 3rd row seats with the roller
stowed at the rear, it is necessary to raise the
concertina boards in order to allow access to
the
 
seat
 
locking   controls   (red   straps).
F
 E
nsure
 
that
 
the
 
3rd row seats are folded.
F
 F
old
 
the
 
first
 
two
 
concertina   boards.
F

I

nstall the roller in the space above the arm
rest,
 
one
 
side
 
after   the   other,   inclining   it  
s

li g ht l y.
F
 
S

lide
 
the
 
roller
 
as
 
far   as   it   will   go,   up   to   the  
c

ut-outs
 
provided
 
at   the   back   of   the   boot,  
w

ith
 
the
 
two
 
flaps
 
directed   downwards.
F
 
U

nfold
 
the
 
third
 
row   seats.
The folded concertina boards can be
positioned
 
horizontally   or   vertically.
3
Ease of use and comfort

120
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
To r c h
This is a removable lamp, fitted in the side of
the boot, which can be used to illuminate the
boot  or   as   a   torch.
Operation
This torch operates with NiMH type
rechargeable b atteries.
It
  has   a   battery   life   of   approximately   45   minutes  
a

nd   charges   while   you   are   driving.
Use
F Extract  the   torch   from   its   location   by   pulling  i
t   from   the   front.
F
 
P
ress   the   switch,   located   on   the   back,   to  
s

witch   the   torch   on   or   off.
F
 
U
nfold   the   support,   located   on   the   back,   to  
s

et   down   and   raise   the   torch;   for   example,  
w

hen   changing   a   wheel.
Storing
F Put  the   torch   back   in   place   in   its   location  s
tarting   with   the   rear.
 I

f   you   have   forgotten   to   switch   off   the   torch,  
t

his   switches   it   off   automatically.
If
  the   torch   is   not   engaged   correctly,   it  
m

ay   not   charge   and   may   not   come   on  
w

hen   the   boot   is   opened.
Observe
 
the
 
polarities
 
when
 
fitting
 
the
 
b

atteries.
Never
 
replace
 
the
 
rechargeable
 
b

atteries
 
with
 
single-use
 
batteries.
Ease of use and comfort

215
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
To avoid causing a nuisance to other road users,   the   headlamps   should   be   adjusted  
a

ccording   to   the   load   in   the   vehicle.
0.
 1

  or   2   people   in   the   front   seats.
-.
 I

ntermediate
 s
etting.
1.
 5

  people   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
2.
 D

river   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
3.
 5

  people   +   maximum   load   in   the   boot.
Adjusting the headlamp 
b

eam
 hei
ght
The initial setting is position "0".
Programming
The activation, deactivation and choice of
welcome
  lighting   duration   are   done   in   the   touch  
s

creen
 t
ablet.
In the Driving menu, select the " Settings"
tab then " Lighting" and select " Welcome
lighting ".
Use
  the   arrows   or   the   cursor   to   adjust   the  
d

uration   of   the   lighting.
Direction indicators
F Left:  lower   the   lighting   stalk   passing   the  p
oint   of   resistance.
F
 
R
ight:   raise   the   lighting   stalk   passing   the  
p

oint   of   resistance.
Three flashes of the direction
indicators
F Press briefly upwards or downwards, without   going   beyond   the   point   of  
r

esistance;   the   direction   indicators   will  
f

lash   3   times.
5
Lighting and visibility

230
C4-Picasso-II_en_Chap06_securite_ed01-2016
2nd row centre seat belt
The seat belt for the centre rear seat is built into the roof.
Fastening
F Pull  the   strap   and   insert   the   tongue   A into
the   right   hand   buckle.
F
 
I
nsert   tongue   B   into   the   left   hand   buckle.
F
 
C
heck   that   each   buckle   is   correctly  
f

astened   by   pulling   on   the   belt   webbing.
Unfastening
F Press  the   red   button   in   buckle   B, then
buckle A .
F

G
uide the seat belt as it reels in and place
the
  tongue   B and then A   on   the   magnet   in  
t

he   roof   anchorage   point.
Before any operation of the rear seats,
to
  avoid   damage   to   the   seat   belts  
c

heck   that   there   is   no   slack   in   the   outer  
b

elts   and   secure   their   tongues   on   the  
a

nchorage   points.   The   centre   seat   belt  
m

ust   be   fully   reeled   in.
3rd row seat belts
Fastening
F Detach  the   seat   belt   strap   from   its   retaining  l
oop   located   on   the   side   trim   of   the   boot.
F
 
P
ull   on   the   strap   and   insert   the   tongue   into  
t

he   buckle.
F
 
C
heck   that   the   buckle   is   correctly   fastened  
b

y   pulling   on   the   belt   strap.
Unfastening and stowing
F Press  the   red   button   in   buckle.
F  G uide   the   seat   belt   strap   as   it   reels   in.
F
 
S
ecure   the   strap,   flat   in   the   retaining   loop.
Ensure that the seat belts are secured
when
  not   in   use.
Safety

266
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Accessories
A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese   accessories   and   parts   are   all   suitable   for   your   vehicle   and   benefit   from   CITROËN's   recommendation   and   warranty.
"Comfort"
Door deflectors, sun blind, insulated module,
coat  hanger   fixed   to   head   restraint,   mobile  
r

eading   lamp,   mirror   for   caravan,   front   and   rear  
par

king
 s
ensors,
 p
rogrammable
 a
dditional
 h

eating,   smoker's   kit,   solar   film   for   rear   door  
w

indows,   portable   scented   air   freshener...
"Transport systems"
Boot carpet, boot liner, boot net, boot
spacers,  transverse   roof   bars,   ski   carrier,   roof  
b

oxes,   towbars,   towbar   wiring   harnesses,  
b

icycle carriers for towbar and roof bars,
towbars
  with   fixed   and   detachable   towball,  
s

eparation   net,   sliding   carrier,   boot   organiser  
(

Grand C4 Picasso)...
If
  a   towbar   and   wiring   harness   are   fitted  
o

utside   the   CITROËN   dealer   network,   the  
i

nstallation must be done strictly in line with the
manufacturer's
 r

ecommendations.
If your vehicle has a detachable towball, it is
recommended that the ball be removed when
not
  towing.
"Styling"
Gear lever knobs, aluminium foot rest, alloy wheels, door sill finishers, interior mirror
shells...
"Security and safety"
Anti-intrusion alarm, vehicle tracking system, c hild seats and booster cushions, breathalyser,
first
  aid   kit,   fire   extinguisher,   warning   triangle,  
h

igh   visibility   vest,   wheel   security   bolts,   snow  
c

hains,   non-slip   covers,   winter   tyres,   foglamp  
k

it,   security   film   for   front   door   windows,   dog  
g

uard,   pet   seat   belt...
"Protection"
Mats*, seat covers compatible with lateral
airbags,  mud   flaps,   door   protective   mouldings,  
b

umper protection strips, vehicle cover, boot
sill protector, door sill protectors, seat and boot
protective
  covers   for   pets...
The
  rear   bodywork   has   been   designed   to   avoid  
s

p r ay.
*
 
T
o   avoid   any   risk   of   jamming   the   pedals:
-

e
nsure that mats are correctly positioned
and secured,
-
 
n
ever   fit   one   mat   on   top   of   another.
Practical information

279
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
AdBlue® additive and SCR system
for
 
BlueHDi   Diesel   engines
To assure respect for the environment and
conformity with the new Euro 6 emissions
standard,
  without   adversely   affecting   the  
p

er formance or fuel consumption of Diesel
engines,
  CITROËN   has   taken   the   decision   to  
e

quip its vehicles with an effective system that
associates SCR (Selective Catalytic Reduction)
with a particle filter (FAP) for the treatment of
exhaust
  gases.
Presentation of the SCR system
Using a fluid called AdBlue® containing urea, a c
atalytic
 
converter
 
turns
 
up
 
to   85%   of   nitrogen  
o

xides
 
(NOx)
 
into
 
nitrogen
 
and   water,   which   are  
h

armless
 
to
 
health
 
and
 
the
 
environment. The AdBlue
® additive is held in a special
tank
 
located
  under   the   boot   at   the   rear   of  
t

he
 
vehicle.
 
It   has   a   capacity   of   17   litres:   this  
p

rovides
 
a
 
driving   range   of   about   12   500   miles  
(

20
 
000
 
km),
  after   which   an   alert   is   triggered  
w

arning
 
you
 
when   the   reserve   remaining   is  
e

nough
 
for
 
just   1   500   miles   (2   400   km).
During
 
each
  scheduled   service   of   your   vehicle  
b

y
 
a
 
CITROËN   dealer   or   a   qualified   workshop,  
t

he AdBlue
® additive tank is refilled in order to a
llow
 
normal   operation   of   the   SCR   system.
If
 
the
 
estimated   mileage   between   two   services  
i

s
 
greater
 
than   12   500   miles   (20   000   km),   we  
r

ecommend
  that   you   go   to   a   CITROËN   dealer  
o

r
 
a
 
qualified   workshop   to   have   the   necessary  
t

op-up
 
carried   out. Once the AdBlue
® tank is empty, a s
ystem
 
required
  by   regulations  
p

revents
 
starting
 
of   the   engine.
If the SCR

is faulty, the level of
emissions from your vehicle will no
longer
 
meet
 
the
 
Euro   6   standard:   you  
v

ehicle
 
becomes
 
polluting.
In the event of a confirmed fault
with
 
the
 
SCR
 
system,   you   must   go  
t

o a CITROËN dealer or a qualified
workshop
 
as
 
soon   as   possible:   after  
a

 
running
 
distance   of   650   miles  
(

1 100
 
km),
 
a
 
system   will   be   triggered  
a

utomatically
 
to
 
prevent   engine   starting.
7
Practical information

282
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Important:   if   your   vehicle's   AdBlue®
tank
 
is
 
completely
 
empty
 
-
 
which
 
is
 
c

onfirmed
 
by
 
the
 
alert
 
messages
 
and  
t

he
 
impossibility
 
of
 
starting
 
the
 
engine,  
y

ou
 
must
 
add
 
at
 
least
 
3.8
 
litres
 
of
 
fluid. Important
  :  w hen topping-up after
running out of AdBlue®, signalled b
y
 
the
 
message
 
"Top-up
  AdBlue:  
S

tarting
 
prevented",
 
you
 
must   wait  
f

or
 
approximately
 
5
 
minutes   before  
s

witching
 
on
 
the
 
ignition,
  without
opening the driver's door, unlocking
the vehicle, placing the key of the
"Keyless Entr y and Star ting" system
inside the vehicle or inser ting the
electronic key in the reader.
Switch
 
on
 
the
 
ignition,
 
wait   for  
1

0 seconds,
 
then
 
start
 
the   engine.
If any fluid is spilt or splashed, wash
immediately with cold water or wipe with
a
 
damp
 
cloth.
If the fluid has crystallised, clean it off
using
 
a
 
sponge
 
and
 
hot
 
water.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth. F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 
it
 
a
 6th of a turn clockwise, to its stop.
F
 R
efit   the   black   cap   and   turn   it   a   quarter   of  
a

 
turn   clockwise   without   pressing.   Ensure  
t

hat the indicator on the cap lines up with
the
  indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel   and/or   the   storage   box   to   the   bottom  
o

f
  the   boot.
F
 
R

efit   the   boot   carpet   and   close   the   tailgate.
Do not dispose of AdBlue
® bottles in
the
 
household
 
waste.
 
Place   them   in   a  
c

ontainer provided for this purpose or
take
 
them
 
to
 
your
 
dealer.
Practical information

291
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Spare wheel
The tools are installed in the boot under the
f l o o r.
Remove  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
A ll of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hock   for   immobilising   the   vehicle   (except  
v

ersions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   remover.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
*
  According   to   equipment.
8
In the event of a breakdown