Page 193 of 527

191
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Operation
Activating the function
With the engine running:
F I n the Driving menu, select the " Driving
assistance " tab, then "Panoramic visual
aid ".
With this menu displayed, select one of the
three
views:
Deactivating the function
F Accelerate so as to exceed 18 mph
(30 km/h).
or
F
I
n the Driving menu, select the " Driving
assistance " tab, then "Panoramic visual
aid ".
F
Sel
ect
"
Camera
O
ff".
Check
the cleanliness of the camera
l
enses
r
egularly.
High pressure jet wash
When
washing your vehicle, direct the
l
ance at least 30 cm away from the
c
amera.
"Front
camera".
"360°
camera".
"Rear
camera".
The view selected is displayed in the
instrument
pan
el.
360 vision
The cameras located in the front and rear
bumpers and under the door mirrors are
activated and a reconstruction of the view from
above
y
our
v
ehicle
i
n
i
ts
i
mmediate
s
urroundings
i
s displayed in the instrument panel.
Opening
a door or the tailgate disturbs
t
he 360 and rear views.
Fitting
the very cold conditions screen
a
ffects the image transmitted by the
f
ront camera.
The display in the instrument panel
disappears
above 9 mph (15 km/h).
The
image transmitted by the camera
c
an be slightly affected by the presence
o
f the very cold conditions screen.
4
Driving
Page 209 of 527

207
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Displays
Illumination of the corresponding indicator lamp in the instrument panel confirms that the
lighting
selected is on.
The rear sidelamps and direction
indicators
are located on the tailgate.
W
hen they are on, opening the tailgate
a
utomatically transfers illumination to
the lamps located in the rear bumper, to
maintain
the safety of the vehicle.
Main lighting
Lighting off (ignition off) /Daytime running lamps (engine running).
Automatic illumination of headlamps.
D aytime running lamps / Dipped
b
eam / Main beam.
Sidelamps.
Dipped
or main beam headlamps.
Turn
the
ring A to place the desired symbol
against
the mark.
Selection of main lighting mode
Model without AUTO lighting
Model with AUTO lighting Headlamp dipping
Pull the stalk B towards you to switch the
l ighting between dipped and main beam
h
eadlamps or to activate automatic headlamp
dipping.
In
the lighting off and sidelamps modes, the
d
river can switch on the main beam headlamps
temporarily
("headlamp flash") by maintaining a
p
ull on the stalk.
5
Lighting and visibility
Page 211 of 527

209
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Operation of the rear foglamps is inhibited with the tailgate open.
Opening
the tailgate when these lamps
a
re on causes them and their indicator
lamp
in the instrument panel to go off.
They
do not come back on
a
utomatically when the tailgate is
c
losed: they must be switched on again
u
sing the control stalk. In
good or rainy weather, by both day a
nd night, the front foglamps and the
r
ear foglamps are prohibited. In these
s
ituations, the power of their beams
may
dazzle other drivers. They should
o
nly be used in fog or falling snow.
In these weather conditions, you should
switch
on the foglamps and dipped
b
eam headlamps manually, as the
sunshine sensor may detect sufficient
light.
Do
not forget to switch off the front and
r
ear foglamps when they are no longer
n
ecessary.Switching off the lighting
when switching off the ignition
When the ignition is switched off, all of the lamps switch off immediately, except for the d
ipped beam headlamps if automatic guide-
me-home
lighting is activated.
Switching on the lighting when
switching on the ignition
To reactivate the lighting control stalk, turn the ring A to position "0"
- lighting off, then t
o the position of your choice.
When the driver's door is opened, a temporary audible signal warns you that
t
he vehicle's lighting is on.
They switch off automatically after a period
which depends on the state of charge of the b
attery (entry to energy economy mode).
5
Lighting and visibility
Page 271 of 527

269
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Roof bars
For safety reasons and to avoid damaging the roof, it is essential to use transverse roof bars
that
are approved for your vehicle.
Observe
the fitting instructions and the
c
onditions of use given in the information
p
rovided with the roof bars.Version with
longitudinal bars
To install the roof bars, you must secure
them only to the four anchorage points in the
r
oof frame. These points are masked by the
v
ehicle's doors when closed.
The
roof bar fixings include a stud that should
b
e introduced into the aperture at each
anchorage
p
oint.
Version without longitudinal
bars
You must fit the transverse bars to the
longitudinal bars at the fixing points indicated
b
y engraved markings on the longitudinal bars.
Recommendations
F Distribute the load evenly, avoiding ov
erloading on one side.
F
A
rrange the heaviest part of the load as
c
lose as possible to the roof.
F
A
nchor the load securely and fit a warning
f
lag if part of it overhangs the vehicle.
F
D
rive gently, as the vehicle will be more
l
iable to the effects of side winds (vehicle
stability
may be affected).
F
R
emove the roof bars as soon as they are
no
lon
ger
n
eeded. Maximum
load, distributed over the roof
b
ars, for a loading height not exceeding
4
0 cm: 80 kg
.
This value is subject to change, please
c
heck the maximum load stated in the
i
nstructions provided with he roof bars.
If the height exceeds 40 cm, adapt the
s
peed of the vehicle to the profile of the
road to avoid damaging the roof bars
a
nd the fixings on the vehicle.
Please refer to national legislation so as
t
o meet the requirements on carrying
o
bjects that are longer than the vehicle.
When carrying long objects, it is r
ecommended that you deactivate the
motorised
operation of the tailgate.
7
Practical information
Page 284 of 527

282
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Important: if your vehicle's AdBlue®
tank
is
completely
empty
-
which
is
c
onfirmed
by
the
alert
messages
and
t
he
impossibility
of
starting
the
engine,
y
ou
must
add
at
least
3.8
litres
of
fluid. Important
: w hen topping-up after
running out of AdBlue®, signalled b
y
the
message
"Top-up
AdBlue:
S
tarting
prevented",
you
must wait
f
or
approximately
5
minutes before
s
witching
on
the
ignition,
without
opening the driver's door, unlocking
the vehicle, placing the key of the
"Keyless Entr y and Star ting" system
inside the vehicle or inser ting the
electronic key in the reader.
Switch
on
the
ignition,
wait for
1
0 seconds,
then
start
the engine.
If any fluid is spilt or splashed, wash
immediately with cold water or wipe with
a
damp
cloth.
If the fluid has crystallised, clean it off
using
a
sponge
and
hot
water.
F
A
fter
emptying
the
bottle,
wipe
away
any
s
pillage
around
the
tank
filler
using
a
damp
c
loth. F
R
efit
the
blue
cap
to
the
tank
and
turn
it
a
6th of a turn clockwise, to its stop.
F
R
efit the black cap and turn it a quarter of
a
turn clockwise without pressing. Ensure
t
hat the indicator on the cap lines up with
the
indicator on the support.
F
D
epending on equipment, return the spare
w
heel and/or the storage box to the bottom
o
f
the boot.
F
R
efit the boot carpet and close the tailgate.
Do not dispose of AdBlue
® bottles in
the
household
waste.
Place them in a
c
ontainer provided for this purpose or
take
them
to
your
dealer.
Practical information
Page 285 of 527
283
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Warning triangle
This safety device should be used in addition to
the hazard warning lamps.
Its
presence in the vehicle is mandatory.
A
location for stowing the warning triangle is
p
rovided in the tailgate interior trim.
Placing the triangle in the road
F Place the triangle behind the vehicle, as r
equired by the legislation in force in your
c
o unt r y.Before
leaving your vehicle to set up
a
nd install the triangle, switch on the
h
azard warning lamps and put on your
h
igh visibility vest.
Refer to the instructions provided by the
supplier on folding and unfolding the
t
riangle.
8
In the event of a breakdown
Page 308 of 527
306
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgate
Contact a CITROËN dealer or a
qualified workshop for the replacement
o
f reversing lamp and direction indicator
b
ulbs.
Identify
the
failed
bulb.
F
O
pen
the
boot.
F
R
emove
the
access
cover.
F
R
emove
the
three
lamp
fixing
screws
A
.
F
D
isconnect
the
lamp
connector.
F
C
arefully remove the lamp from the outside
by
pressing
the
retaining
clip
B
.
F
T
urn the bulb holder a quarter of a turn
anti-clockwise and pull the bulb out.
F
C
hange the bulb.
For reassembly, carry out these operations in
reverse
o
rder.
Model with LED lamps
Model with conventional bulb lamps
In the event of a breakdown
Page 310 of 527
308
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgateModel with LED lamps
Model with conventional bulb lamps
Identify
the
failed
bulb.
F
O
pen
the
boot.
F
R
emove
the
access
cover. F
R
emove
the
three
lamp
fixing
screws
A .
F
D
isconnect
the
lamp
connector.
F
C
arefully
r
emove
t
he
l
amp
f
rom
i
ts
h
ousing.
F
T
urn the bulb holder a quarter of a turn
anti-clockwise
and
pull
the
bulb
out.
F
C
hange
the
bulb.
For reassembly, carry out these operations in
reverse
o
rder.
In the event of a breakdown