2016 Citroen C4 PICASSO seats

87
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Third-row seats
Concertina boards
Folding the concertina boardsF Remove  the   luggage   net.  F
or   more   information   on   the   luggage   net  
a

nd the Interior fittings , refer to the
corresponding
 s

ection.
F

R
eturn the second-row continuity panels to
their
  initial   position   and   lock   them   in   place.
F

F
old the concertina boards and position
them
 v

ertically.
F

P
ull on the strap F located behind the seat
backrest.
  The   backrest   pivots   rear wards,  
p

ulling   the   seat   base   with   it.   The   seat   locks  
i

n   the   open   position.
Each of the two floor panels can
support
 
a
 
load
 
of
 
100
 
kg.
Pull
 
on
 
the
 
control,
 
the
 
3
 
sections
 
of
 
the
 
board
 
w

ill
 
fold
 
like
 
a
 
concertina.
When
 
the
 
third-row
 
seats
 
are
 
upright,
 
these
 
c

oncertina
 
boards
 
can
 
be
 
left
 
either:
-
f

lat behind the seats,
-

i

n the vertical position,
thereby
 
leaving
 
a
 
storage
 
area
 
available.
Repositioning the
seats
Two rigid concertina boards, which cannot b e separated from the vehicle, cover the
2
third-row seats, when these are in the folded
position.
3
Ease of use and comfort

88
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
F Return the second-row continuity panels to their   initial   position   and   lock   them.
F
 
L
ower   the   head   restraints.
F

C
orrectly position the concertina board
vertically
  behind   the   seat.
F
 
C
heck   that   the   seat   belts   for   the   3
rd row
seats
 
are
 
correctly
 
fixed
 
to
 
the
 
loops   and  
a

re
 
not
 
folded.
F

P

ull the strap G , located at the bottom of
the
 
seat
 
backrest.
 
The
 
seat
 
unlocks. Before
  moving   the   third-row   seats,  
r

eturn   the   rigid   floor   plates   of   the  
s

econd-row   seats   to   the   upright   position  
a

nd   lock   them   in   place.
Do not try to fold a third-row seat that
has   not   first   had   the   backrest   fully  
l

ocked   in   place.
Do
  not   leave   objects   either   on   or  
u

nderneath the seat bases of the third-
row
  seats   when   you   are   folding   them.
Do not leave your hand on the control
G
as
  you   fold   the   seats,   as   you   risk  
t

rapping
 y
our
 f
ingers.
Do not allow children to operate the
seats
 w

ithout
 s
upervision.
F
 
N
ext   push   the   backrest   gently   for wards.  
T

he   backrest   pivots,   folding   onto   the   seat  
b

ase.   The   seat   base   then   folds   into   the  
s

towage   area   provided   for   that   purpose.
F
R
eposition the concertina boards over the
folded   seats.
Folding the seats
Ease of use and comfort

89
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Seat modularity and configurations
Examples of configurations
5 seats
4 seats3 seats
Maximum loadspace
3
Ease of use and comfort

90
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Examples of seat configurations
7 seats
6 seatsMaximum loadspace
5 seats 4 seats
For easy modification of your
interior
vehicle space, all the rear seats
can
  be   individually   folded:   onto   the  
se

cond-row floor, and under the third-
row
  floor.   You   can   then   have   a   load  
f

loor that is continuous up to the front
seat
  backrests.
The seats must only be folded and
unfolded
  with   the   vehicle   stationary.
Ease of use and comfort

100
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
"Rear" function
F Press  this   button   to   activate   /  d
eactivate   the   "Rear"   function.
From
 
the
 
secondary   page   of   the   Air
conditioning
 m
enu:
This
 
function   gives   rear   passengers   access   to  
t

he
 
adjustment   controls   and   allows.
-

t

he distribution of air conditioned air to the
vents for the 2
nd row of seats,
-
t
he distribution of ambient air to the vents
for
 
the
 
3
rd row of seats.
F
T
urn the upper wheel to open or close the
rear
  vent.
F
 
T
urn   the   lower   knob   to   reduce   (to   the   left)  
o

r   increase   (to   the   right)   the   air   flow.
Settings for passengers in
the 2nd row of seats"Mono" function
The comfort setting for the passenger's side c
an   be   indexed   to   the   driver's   comfort   setting  
(

mono-zone).
From
  the   secondary   page   of   the   Air
conditioning
 m

enu:
F
 
P
ress   this   button   to   activate   /  
d

eactivate   the   "Mono"   function.
The function is deactivated automatically when
the
 p

assenger
 u
ses
 t
heir
 t
emperature
 se
tting
 b

uttons.
Ease of use and comfort

101
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Settings for
passengers in
the 3
rd row of seats
F Press   the   vent   cover.
F  A djust   the   flow   of   air   to   the   two   vents   using  
t

he four-position wheel (off, low, medium,
hi g h).
F
 
D
irect   the   vent   by   turning   the   cover.
Ventilation with ignition on
function
With the ignition on, you can use the ventilation system and have access to the Air
conditioning
 

menu   to   adjust   the   air   flow   and  
a

ir   distribution   in   the   passenger   compartment.
This function is available for a few minutes,
depending
  on   the   state   of   charge   of   the   battery  
o

f   your   vehicle.
This function does not activate the air
conditioning.
You
  can   make   use   of   the   residual   heat   in   the  
e

ngine   to   warm   the   passenger   compartment  
u

sing   the   temperature   setting   buttons.
3
Ease of use and comfort

110
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
To remove the mat on the driver's side:
F  m ove   the   seat   as   far   back   as   possible,
F
 
u
nclip   the   fixings,
F
 
r
emove   the   mat.
Mats
When fitting the mat for the first time, on the driver's   side   use   only   the   fixings   provided   in   the  
w

allet   attached.
The other mats are simply placed on the
carpet. To
  avoid   any   risk   of   jamming   of   the  ped
als:
-

o
nly use mats which are suited to
the
  fixings   already   present   in   the  
v

ehicle;   these   fixings   must   be   used,
-
 
n
ever   fit   one   mat   on   top   of   another.
The use of mats not approved by
CITROËN may inter fere with access to
the pedals and hinder the operation of
the
  cruise   control   /   speed   limiter.
The mats approved by CITROËN have
two
  fixings   located   below   the   seat.
To
  refit   the   mat   on   the   driver's   side:
F
p
osition the mat correctly,
F  
r
efit   the   fixings   by   pressing,
F  
c
heck   that   the   mat   is   secured   correctly.
Fitting
Removal
Refitting
Storage boxes
F Raise  the   grip   and   lower   the   storage   box  c
ove r.
Opening
Do not place heavy objects in the boxes.
Depending
  on   equipment,   storage   boxes   are  
l

ocated   under   the   front   seats.
Ease of use and comfort

111
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Storage below 
t

he steering   wheel
This storage compartment below the steering w
heel   is   intended   for   stowing   your   vehicle's  
han

dbook
 pa
ck.
Rear fittings
Aircraft-style rear tables
These tables, fitted to the backs of the front seats, incorporate a cup-holder recess A and a
retaining
  strap   B.
F
 
P
ull   the   table   downwards   to   open.
F

T
o stow the table, raise it until the latch
locks.
For safety reasons, these tables collapse
downwards
  if   excessive   pressure   is   exerted   on  
t

hem. Reading
  lamps   C may be fitted in the front seat
backrests,   behind   the   tables.   They   illuminate  
t

he   sur face   of   the   tables   without   disturbing   the  
o

ther
 p
assengers.
They   can   be   used   only   while   the   table   is   down.
F  
P
ress   the   "on/off "   button   to   turn   the   lamp  
o

n   or   off.
Individual reading lamps
Rear table stowed
Rear table opened
3
Ease of use and comfort