2016 Citroen C4 boot

121
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
F Raise the boot carpet for access to the storage   box.
This
  has   areas   for   the   storage   of   a   box   of   spare  
b

ulbs,   a   first   aid   kit,   two   warning   triangles...
It
  also   contains   the   vehicle   tools,   the   temporary  
p

uncture   repair   kit...
Storage box
Use
F Extract  the   torch   from   its   location   pulling   it  up
wards.
F
 
P
ress   the   switch,   located   on   the   back,   to  
s

witch   the   torch   on   or   off.
F
 
U
nfold   the   support,   located   on   the   back,   to  
s

et   down   and   raise   the   torch;   for   example,  
w

hen   changing   a   wheel.
Storing
F Put  the   torch   back   in   place   in   its   location  s
tarting   with   the   lower   part.
 I

f   you   have   forgotten   to   switch   off   the   torch,  
t

his   switches   it   off   automatically.
If
  the   torch   is   not   engaged   correctly,   it  
m

ay   not   charge   and   may   not   come   on  
w

hen   the   boot   is   opened.
3
Ease of use and comfort

122
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
This comes on automatically when the boot is opened   and   goes   off   automatically   when   the  
b

oot   is   closed.
Boot lamp
The lighting time varies according to the circumstances:
-
 
w
hen   the   ignition   is   off,   approximately
 t

en
 m
inutes,
-
 
i
n   energy   economy   mode,
 a

pproximately   thirty   seconds,
-
 
w
hen   the   engine   is   running,   no   limit.
Ease of use and comfort

232
C4-2_en_Chap07_infos-pratiques_ed02-2015
AdBlue® additive and SCR system
f
or
 
BlueHDi   Diesel   engines
To assure respect for the environment and c
onformity   with   the   new   Euro   6   emissions  
s

tandard,   without   adversely   affecting   the  
p

er formance   or   fuel   consumption   of   Diesel  
e

ngines,   CITROËN   has   taken   the   decision   to  
e

quip   its   vehicles   with   an   effective   system   that  
a

ssociates   SCR   (Selective   Catalytic   Reduction)  
w

ith   a   particle   filter   (FAP)   for   the   treatment   of  
e

xhaust   gases.
Presentation of the SCR system
Using an additive called AdBlue® containing urea, a
 
catalytic
 
converter
 
turns
 
up
 
to
 
85%   of   nitrous o

xides
 
(NOx)
 
into
 
nitrogen
 
and
 
water,   which   are
 h

armless
 
to
 
health
 
and
 
the
 
environment.
The AdBlue® additive is held in a special
tank
 
located
  under   the   boot   at   the   rear   of  
t

he
 
vehicle.
 
It   has   a   capacity   of   17   litres:   this  
p

rovides
 
a
 
driving   range   of   about   12   500   miles  
(

20
 
000
 
km),
  after   which   an   alert   is   triggered  
w

arning
 
you
 
when   the   reserve   remaining   is  
e

nough
 
for
 
just   1   500   miles   (2   400   km).
During
 
each
  scheduled   service   of   your   vehicle  
b

y
 
a
 
CITROËN   dealer   or   a   qualified   workshop,  
t

he AdBlue
® additive tank is refilled in order to a
llow
 
normal   operation   of   the   SCR   system.
If
 
the
 
estimated   mileage   between   two   services  
i

s
 
greater
 
than   12   500   miles   (20   000   km),   we  
r

ecommend
  that   you   go   to   a   CITROËN   dealer  
o

r
 
a
 
qualified   workshop   to   have   the   necessary  
t

op-up
 
carried   out. Once the AdBlue
® tank is empty, a s
ystem
 
required
 
by   regulations   prevents  
s

tarting
 
of
 
the
 
engine.
If the SCR is faulty, the level of
emissions
 
from
 
your   vehicle   will   no  
l

onger
 
meet
 
the
 
Euro   6   standard:   your  
v

ehicle
 
becomes
 
polluting.
In
 
the
 
event
 
of
 
a
 
confirmed   fault  
w

ith
 
the
 
SCR
 
system,   you   must   go  
t

o
 
a
 
CITROËN
 
dealer   or   a   qualified  
w

orkshop
 
as
 
soon   as   possible:   after  
a

 
running
 
distance   of   650   miles  
(

1 100
 
km),
 
a
 
system   will   be   triggered  
a

utomatically
 
to
 
prevent   engine   starting.
Freezing of the AdBlue
® additive
The AdBlue
® additive freezes at
temperatures   below   around   -11°C.
The
 
SCR
 
system   includes   a   heater  
f

or the AdBlue
® tank, allowing you to c
ontinue
 
driving   in   very   cold   conditions.
Practical information

234
C4-2_en_Chap07_infos-pratiques_ed02-2015
Recommendations on storageProcedure
F Switch  off   the   ignition   and   remove   the  k
ey,   or   if   your   vehicle   has   one,   press   the  
S

TART/STOP   button   to   switch   off   the  
e

ngine. F

R
aise the boot floor for access to the
AdBlue
® tank. S
ecure
 
the   boot   floor   by   attaching   its   cord  
t

o
 
the
 
hook   on   the   parcel   shelf   support.
F
 
U

nclip
 
the   black   plastic   blanking   plug   using  
i

ts
 
tab.
F
 
I

nsert
 
your   fingers   into   the   aperture   and  
t

urn
 
the
 
blue   cap   a   6
th of a turn anti-
clockwise.
F
 
C

arefully
 
lift
 
off
 
the
 
cap,   without   dropping   it.
Never store bottles of AdBlue
® in your
vehicle. Before
  topping-up,   ensure   that   the   vehicle   is  
p

arked   on   a   flat   and   level   sur face.
In wintry conditions, ensure that the
temperature   of   the   vehicle   is   above   -11°C.  
O

therwise the AdBlue
® may be frozen and s
o
 
cannot
 
be
 
poured
 
into   its   tank.   Park   your  
v

ehicle
 
in
 
a
 
warmer
 
area   for   a   few   hours   to  
a

llow
 
the
 
top-up
 
to
 
be
 
carried   out.
AdBlue
® freezes at about -11°C and d
eteriorates   above   25°C.   It   is   recommended  
t

hat bottles be stored in a cool area and
protected
  from   direct   sunlight.
Under
 
these   conditions,   the   additive   can   be  
k

ept
 
for
 
at   least   a   year.
If the additive has frozen, it can be used once it
has
 
completely   thawed   out.
Practical information

235
C4-2_en_Chap07_infos-pratiques_ed02-2015
F Obtain a bottle of AdBlue®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank. F  
A
fter   emptying   the   bottle,   wipe   away   any  
s

pillage   around   the   tank   filler   using   a   damp  
c

loth.
F  
R
efit   the   blue   cap   to   the   tank   and   turn   it   a  
6th of a turn clockwise, to its stop.
F
 R
efit   the   black   plastic   blanking   plug,  
c

lipping   it   in   on   the   flap
F
 
D

etach   the   cord   from   the   parcel   shelf  
s

upport   and   lower   the   boot   floor.
Important:
 
if
 
your
 
vehicle's
 
AdBlue®
tank
 
is
 
completely
 
empty
 
-
 
which
 
is
 
c

onfirmed
 
by
 
the
 
alert
 
displays
 
and
  the  
i

mpossibility
 
of
 
starting
 
the
 
engine
 
-   you  
m

ust
 
add
 
at
 
least
 
3.8
 
litres
 

(so
 
two
 
1.89 litre
 
bottles). If any additive is split or splashed, wash
immediately
 
w
ith  
c
old  
w
ater  
o
r  
w
ipe  
w
ith  
a

  damp   cloth.
If the additive has crystallised, clean it
off   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up
after a breakdown because of a lack
of additive ,   you   must   wait   around  
5   minutes   before   switching   on   the  
ig

nition,
 w
ithout opening the
driver's door, locking the vehicle,
introducing the key into the ignition
switch, or introducing the key of the
"Keyless Entr y and Star ting" system
into the passenger compartment .
Switch   on   the   ignition,   then,   after  
10   seconds,   start   the   engine.
Never dispose of AdBlue® additive
bottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 p

urpose
 o

r
 t

ake
 t

hem
 t
o
 y
our
 d
ealer.
7
Practical information

236
C4-2_en_Chap07_infos-pratiques_ed02-2015
Accessories
Conversion kits
You can obtain an "Enterprise" kit to convert a trade   vehicle   to   a   private   car   and   vice-versa.
"Comfort":
door deflectors, side window blinds, rear
screen  blind,   insulated   module,   coat   hanger  
f

ixed   to   head   restraint,   reading   lamp,   mirror   for  
c

aravan, cruise control, scented air freshener
and
  cartridges,   parking   sensors...
"Transport systems":
boot carpet, boot liner, boot net, boot spacers,
transverse  roof   bars,   bicycle   carrier,   ski   carrier,  
r

oof   boxes,   towbars,   towbar   wiring   harnesses...
"Styling":
gear lever knobs, aluminium foot rest, alloy wheels,   wheel   embellishers,   chrome   mirror  
s

hells,   chrome   door   
a
perture   finishers,   door   sill  
f

inishers,   tailgate   lower   chrome   finisher...
*
 
T
o   avoid   any   risk   of   jamming   the   pedals:
-
 
e
nsure   that   mats   are   correctly   positioned  
a

nd secured,
-
 
n
ever   fit   one   mat   on   top   of   
a
nother.
"Security and safety":
anti-intrusion alarm, microwave sensor, anti-tilt sensor,   stolen   vehicle   tracking   system,   child  
sea

ts and booster cushions, breathalyser, first
aid
  kit,   fire   extinguisher,   warning   triangle,   high  
v

isibility   vest,   dog   guard,   pet   seat   belt,   wheel  
s

ecurity bolts, snow chains, non-slip covers,
front
  foglamp   kit...
"Protection":
mats*, seat covers compatible with  l ateral  a
irbags,   door   sill   protectors,   mud   flaps,   door  
p

rotective   rubbing   strips,   bumper   protection  
s

trips, protective covers for pets, vehicle
cover...
If
 
a
 
towbar
 
and
 
wiring
 
harness
 
are
 
fitted
 
o

utside
 
the
 
CITROËN
 
dealer
 
network,
 
t

he
 
installation
 
must
 
be
 
done
 
using
 
t

he
 
vehicle's
 
electrical
 
pre-equipment
 
a

nd
 
in
 
line
 
with
 
the
 
manufacturer's
 
r

ecommendations.
A
 
wide
 
range
 
of
 
accessories
 
and
 
genuine
 
parts
 
is
 
available
 
from
 
the
 
CITROËN
 
dealer
 
network.
These
 
accessories
 
and
 
parts
 
are
 
all
 
suitable
 
for
 
your
 
vehicle
 
and
 
benefit
 
from
 
CITROËN's
 
recommendation   and   warranty.
Practical information

244
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
Spare wheel
Access to the tools
The tools are installed in the boot under the
f l o o r.
To  gain   access   to   them:
F

o
pen the boot,
F

r
aise the floor,
F
 
s
ecure   it   by   hooking   its   cord   on   the   hook  
o

n the rear shelf support,
F

w
ith a standard size spare wheel, unclip
and
  remove   the   box   in   the   middle   of   the  
w

heel   containing   the   tools,


or
F
 
w
ith   a   "space-saver"   spare   wheel;   lift   the  
w

heel at the rear towards you for access to
the
  storage   box   containing   the   tools.List of tools Wheel with trim
When removing the wheel
, detach the
trim   first   using   the   wheelbrace   1   pulling  
a

t   the   valve   passage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the  
v

alve   and   press   around   its   edge   with  
t

he   palm   of   your   hand.
Procedure
 
for
 
changing
 
a
 
wheel
 
with
 
a
 
damaged
 
or
 
punctured
 
tyre
 
for
 
the
 
spare
 
wheel,
 
using
 
the
 
tools
 
supplied   with   the   vehicle.
All of these tools are specific to your
vehicle   and   can   vary   according   to
 e

quipment.
Do
  not   use   them   for   any   other   purposes.
1.
 W

heelbrace.
 F

or
 
removing
 
the
 
wheel
 
trim
 
and
 
the
 
wheel
 
f

ixing
 bol

ts.
2.
 J

ack
 
with
 
integral
 
handle.
 F

or
 
raising
 
the
 
vehicle.
3.
 B

olt
 
cover
 
removal
 
tool.
 F

or
 
removing
 
the
 
bolt
 
head
 
protectors
 
on
 
a

lloy
 
wheels.
4.
 S

ocket
 
for
 
the
 
security
 
bolts
 
(located
 
in
 
the
 
g

love
 
box).
 F

or
 
adapting
 
the
 
wheelbrace
 
to
 
the
 
special
 
"s

ecurity"
 b

olts. The
  jack   must   only   be   used   to   change   a
 w

heel   with   a   damaged   or   punctured   tyre.
Do
  not   use   any   jack   other   than   the   one
 s

upplied   with   this   vehicle.
If
  the   vehicle   does   not   have   its   original
 j

ack,   contact   a   CITROËN   dealer   or   a
 q

ualified   workshop   to   obtain   the   correct
 j

ack   for   it.
The
  jack   does   not   require   any
 m

aintenance.
In the event of a breakdown

245
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
For BlueHDi Diesel versions
If your vehicle has an electric parking brake,
the   jack   is   stowed   in   a   bag   placed   in   the   boot.If your vehicle has a manual parking brake
,
the   jack   is   stowed   under   the   spare   wheel   and  
u

nder   the   storage   box:
F
 
r
emove   the   "space-saver"   type   spare  
w

heel,
F
 
r
emove   the   polystyrene   storage   box,
F
 
p
ush   the   jack   for ward,   then   lift   it   by   its   rear  
par

t.The spare wheel is installed in the boot under
the
  floor.
Depending
  on   version,   the   spare   wheel   may   be  
a

  standard   size   steel   or   alloy   wheel;   for   some  
c

ountries   of   sale   it   is   the   "space   saver"   type.
For access to the spare wheel, first refer to
"Access
  to   the   tools"   in   this   section.
Access to the spare wheel
If your vehicle has an electric parking brake,   only   a   "space   saver"   type   of  
w

heel   can   be   stowed   in   the   boot.
8
In the event of a breakdown