68
C4-2_en_Chap02_ouvertures_ed02-2015
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Do
not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from
w
orking and the remote control would have to be reinitialised.
The
remote control does not operate when the key is in the ignition, even when the ignition is switched off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
A s a safety precaution (with children on board), remove the key from the ignition or take the electronic key when you leave the vehicle, even for
a
short time.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic fields, ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
D on't forget to turn the steering to engage the steering lock.
Lost keys, remote control, electronic key
Visit a CITROËN dealer with the vehicle's registration certificate, your personal identification documents and if possible, the label bearing the key code.
The
CITROËN dealer will be able to retrieve the key code and the transponder code required to order a new key
Do
not throw the remote control batteries away, they contain metals which are harmful to the environment.
Take
them to an approved collection point.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
Access
69
C4-2_en_Chap02_ouvertures_ed02-2015
Central locking control
Locking
F Press this button to lock the vehicle.
The red indicator lamp in the button comes on.
Unlocking
F Press the button again to unlock the v
ehicle.
The
red indicator lamp in the button goes off.
This
control
allows
the
simultaneous
locking
or
unlocking of the doors and boot from inside the
v
ehicle.
If one of the doors is open, central
locking
from
the
inside
does
not
take
p
lace. If
the vehicle is locked from the outside,
t
his button is inactive.
F
I
n this case, use the remote control
o
r the key to unlock the vehicle or
p
ull an interior door handle to open
a
door.
2
Access
72
C4-2_en_Chap02_ouvertures_ed02-2015
Locking the vehicle with full
alarm system
Activation
F Switch off the ignition and get out of the vehicle.F Lock the vehicle with the remote control.
or
F
L
ock the vehicle with the "Keyless Entry
a
nd Starting" system.
Deactivation
F Press the unlocking button on the remote c
ontrol.
or
F
U
nlock the vehicle with the "Keyless Entry
a
nd Starting" system.
If
an
opening
(door,
boot...)
is
not
closed
f
ully,
the
vehicle
is
not
locked
but
the
e
xterior
perimeter
monitoring
will
be
a
ctivated after a delay of 45 seconds at
the
same
time
as
the
interior
volumetric
a
nd
anti-tilt
monitoring. When
the vehicle automatically locks
i
tself again (as happens if a door or
b
oot is not opened within 30 seconds of
u
nlocking), the monitoring system is not
r
eactivated automatically. To reactivate
t
he system, it is necessary to unlock
t
he vehicle and then lock it again using
t
he remote control or the "Keyless Entry
a
nd Starting" system.
Following
an
instruction
to
lock
the
vehicle,
t
he
exterior
perimeter
monitoring
is
activated
a
fter a delay of 5 seconds and the interior
volumetric
and
anti-tilt
monitoring
after
a
delay
o
f
45 seconds.
The
monitoring
system
is
active:
the
indicator
l
amp
in
the
button
flashes
once
per
second
a
nd
the
direction
indicators
come
on
for
about
2
seconds. The
monitoring system is deactivated: the
i
ndicator lamp in the button goes off and the
d
irection indicators flash for about 2 seconds.
Access
73
C4-2_en_Chap02_ouvertures_ed02-2015
Locking the vehicle
with exterior perimeter
monitoring only
Deactivate the interior volumetric and anti-tilt monitoring to avoid unwanted triggering of the
a
larm in certain cases such as:
-
l
eaving a pet in the vehicle,
-
l
eaving a window partially open,
-
w
ashing your vehicle,
-
c
hanging a wheel,
-
h
aving your vehicle towed,
-
t
ransport by sea.
Deactivating the interior
volumetric and anti-tilt monitoring
F Switch off the ignition and within t
en seconds, press the button until the
indicator
lamp is on continuously.
F
G
et out of the vehicle.
F
I
mmediately lock the vehicle using the
r
emote control or the Keyless Entry and
S
tarting system.
The
exterior perimeter monitoring alone is
a
ctivated: the indicator lamp in the button
f
lashes once per second.
Reactivating the interior
volumetric and anti-tilt monitoring
F Deactivate the perimeter monitoring by u
nlocking the vehicle with the remote
c
ontrol or the Keyless Entry and Starting
s
ystem.
T
he indicator lamp in the button goes off.
F
R
eactivate all monitoring by locking the
v
ehicle with the remote control or the
K
eyless Entry and Starting system.
T
he indicator lamp in the button flashes
o
nce per second again.
To
be effective, this deactivation must
b
e carried out each time the ignition is
s
witched off.
2
Access
74
C4-2_en_Chap02_ouvertures_ed02-2015
Operating fault
When the ignition is switched on, fixed illumination of the indicator lamp in the button
i
ndicates a fault with the system.
Have
it checked by a CITROËN dealer or a
q
ualified
w
orkshop.
Failure of the remote control
To deactivate the monitoring functions:
F
u
nlock the vehicle using the key (integral to
t
he
remote
control)
in
the
driver's
door
lock,
F
o
pen the door; the alarm is triggered,
F
s
witch on the ignition; the alarm stops; the
i
ndicator lamp in the button goes off.
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the k
ey(integral to the remote control) in the
d
river's door lock.
Triggering of the alarm
This is indicated by sounding of the siren and flashing of the direction indicators for
t
hirty seconds.
The
monitoring functions remain active until
t
he alarm has been triggered eleven times in
s
uccession.
When
the vehicle is unlocked using the remote
c
ontrol or the Keyless Entry and Starting
s
ystem, rapid flashing of the indicator lamp
i
n the button informs you that the alarm was
t
riggered during your absence. When the
i
gnition is switched on, this flashing stops
i
mmediately.
Access
77
C4-2_en_Chap02_ouvertures_ed02-2015
F For the safety of your children, press control 5 to deactivate the rear electric
window
controls, regardless of their
p
osition.
Indicator
lamp on, the rear controls are
d
eactivated.
Indicator
lamp off, the rear controls are
a
ctivated.
Deactivation of the rear
electric window controls
If an obstacle is encountered during o peration of the electric windows, you
must
reverse the movement of the
w
indow. To do this, press the control
c
oncerned.
When the driver operates the controls
for
the passengers' electric windows,
t
hey must ensure that nothing is
p
reventing the windows closing
c
o r r e c t l y.
The
driver must ensure that the
p
assengers use the electric windows
c
o r r e c t l y.
Be particularly aware of children when
operating
t
he
w
indows.
Take
care of any passengers and/or
o
ther persons present when closing the
w
indows using the remote control or the
"
Keyless Entry and Starting" system.
Always
remove the key from the ignition
w
hen leaving the vehicle, even for a
s
hort time.
2
Access
78
C4-2_en_Chap02_ouvertures_ed02-2015
Doors
Opening
From outside
F After unlocking the vehicle or with the e
lectronic key of the Keyless Entry and
S
tarting system in the recognition zone,
p
ull the door handle.
From inside
F Pull the interior control lever of a front door; t
his unlocks the vehicle completely.
Closing
- with the engine running or the v
ehicle moving (speed below
6
mph (10 km/h)), this warning
l
amp comes on, accompanied
b
y an alert message for a
f
ew seconds.
With
the
selective
unlocking
activated:
-
o
pening
the
the
driver's
door
u
nlocks
the
driver's
door
only
(if
the
vehicle
has
not
already
been
c
ompletely
u
nlocked).
-
o
pening
one
of
the
passenger
d
oors
unlocks
the
rest
of
the
v
ehicle.
When
the
selective
unlocking
is
a
ctivated,
the
first
press
of
the
remote
c
ontrol
unlocking
button
permits
u
nlocking
of
the
driver's
door
only. When
a
door is not closed correctly:
-
w
ith
the vehicle moving (speed above
6 m
ph (10 km/h)), in addition to the warning
l
amp
and alert message, there is an
a
udible signal for a few seconds.
Access
79
C4-2_en_Chap02_ouvertures_ed02-2015
Boot
Opening
Complete unlocking
F After unlocking the vehicle or the boot with t
he Keyless Entry and Starting system
e
lectronic key on your person in the
r
ecognition zone A,
press the boot opening
c
ontrol then raise the tailgate.
Selective unlocking
When unlocking of the boot only is activated:
F
W
ith the electronic key on your person and
i
n the recognition zone A, press the boot
unlocking
control to unlock just the boot,
t
hen raise the tailgate.
By
default, complete unlocking is activated.
This setting is done in the "Driving"
menu,
t
hen "Vehicle settings"
and "Vehicle
access" .
The
vehicle
or
just
the
boot
is
unlocked,
d
epending
o
n
t
he
se
tting.
Use this button for access to
a
dditional
in
formation.
Closing
F Lower the tailgate using one of the interior g
rab han dles.
If
the boot is not closed correctly:
-
w
ith the engine running or the
v
ehicle moving (speed below
6
mph (10 km/h)), this warning
l
amp comes on, accompanied by
t
he display of an alert message
f
or a few seconds.
-
w
ith the vehicle moving (speed above
6 m
ph (10 km/h)), in addition to the warning
l
amp and alert message, there is an an
a
udible signal for a few seconds.
Unlocking
is
signalled
by
rapid
flashing
of
the
d
irection
indicators
for
a
few
seconds.
2
Access