2016 Citroen C4 mirror

85
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Storing driving positions
Storing a position
Using buttons M / 1 / 2
F Switch  on   the   ignition.
F  A djust   your   seat   and   the   door   mirrors.
F

P
ress button M , then press button 1 or 2
within
  four   seconds.
 A

n   audible   signal   indicates   that   the   position  
h

as   been   stored.
Recalling a stored position
Ignition on or engine running
F Press button 1 or 2 to recall the corresponding p osition.
 A

n   audible   signal   confirms   that   adjustment  
i

s   complete.
System
 
which
 
registers
 
the
 
electrical
 
settings
 
o

f
 
the
 
driver's
 
seat
 
and
 
door
 
mirrors.
 
It
 
enables
 
y

ou
 
to
 
store
 
and
 
recall
 
two
 
positions
 
using
 
the
 b
uttons
 
on
 
the
 
side
 
of
 
the
 
driver's
 
seat.
Storing
 
a
 
new
 
position
 
cancels
 
the
 
p

revious
 p

osition. You
  can   interrupt   the   current   movement  
b

y   pressing   button M, 1 or 2
  or   by   using  
o

ne   of   the   seat   controls.
A stored position cannot be recalled
while
  driving.
Recalling
  stored   positions   is  
d

eactivated   45   seconds   after   switching  
o

ff   the   ignition.
3
Ease of use and comfort

87
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Mirrors
Each fitted with an adjustable mirror glass permitting t he la teral r earward v ision n ecessary f

or   overtaking   or   parking.
They
  can   also   be   folded   for   parking   in   confined  
spa

ces.
Demisting / Defrosting Adjustment
F Move control A
  to   the   right   or   to   the   left   to  s
elect   the   corresponding   mirror.
F

M
ove control B in all four directions to
adjust.
F

R
eturn control A   to   the   central   position.
Folding
F From  outside:   lock   the   vehicle   using   the  r
emote   control   or   the   key.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If your vehicle is fitted with heated
mirrors,
 
the
 
demisting-defrosting
 
o

perates
 
by
 
switching
 
on
 
the
 
h

eated
 
rear
 
screen. As
 
a
 
safety
 
measure,
 
the
 
mirrors
 
should
 
b

e
 
adjusted
 
to
 
reduce
 
the
 
blind
 
spots.
The
 
objects
 
observed
 
are,
 
in
 
reality,
 
c

loser
 
than
 
they
 
appear.
Take
 
this
 
into
 
account
 
in
 
order
 
to
 
c

orrectly
 
judge
 
the
 
distance
 
of
 
vehicles
 
a

pproaching
 
from
 
behind. If
  the   mirrors   are   folded   using   control   A,
they will not unfold when the vehicle is
unlocked.
  Pull   again   on   control   A.
Door mirrors
For more information on demisting and d
efrosting   the   rear   screen,   refer   to   the  
c

orresponding
 s
ection.
3
Ease of use and comfort

88
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Automatic tilting in reverse gear
System which provides a view of the ground during   parking   manoeuvres   in   reverse   gear.
Programming
F With  the   engine   running,   engage   reverse  g
e a r.
F
 
S
elect   and   adjust   the   left-hand   and   right-
hand
  mirrors   in   succession.
The
  adjustment   is   stored   immediately.
Switching on
F With  the   engine   running,   engage   reverse  g
e a r.
F

M
ove control A   to   the   right   or   to   the   left   to  
s

elect   the   corresponding   mirror.
The
  glass   of   the   mirror   selected   tilts  
d

ownwards, in accordance with its
programming.
Switching off
F Exit   reverse   gear   and   wait   ten   seconds.
or
F

R
eturn control A   to   the   central   position.
The
  mirror   glass   returns   to   its   initial   position.
The
  mirror   glass   also   returns   to   its   initial  
p

osition:
-
 
i
f   the   speed   exceeds   6   mph   (10   km/h),
-
 
i
f   the   engine   is   switched   off.
Unfolding
F From  outside:   unlock   the   vehicle   using   the  r
emote   control   or   the   key.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If
  necessary   the   mirrors   can   be   folded  
m

anually.
The
  folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated by a CITROËN dealer or a
qualified
 w

orkshop.
Ease of use and comfort

89
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Automatic day/night model
By means of a sensor, which measures the light   from   the   rear   of   the   vehicle,   this   system  
a

utomatically   and   progressively   changes  
b

etween   the   day   and   night   uses.
Rear view mirror
Manual day/night model
Adjustment
F Adjust  the   mirror   so   that   the   glass   is  
directed   correctly   in   the   "day"   position.
Day/night position
F Pull  the   lever   to   change   to   the   "night"   anti-
dazzle   position.
F
 
P
ush   the   lever   to   change   to   the  
normal
  "day"   position. In
  order   to   ensure   optimum   visibility  d
uring   your   manoeuvres,   the   mirror  l
ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Adjustable
  mirror   providing   a   central   rear ward   view.
Equipped   with   an   anti-dazzle   system,   which   darkens   the   mirror   glass   and   reduces   the   nuisance   to  
t

he   driver   caused   by   the   sun,   headlamps   from   other   vehicles...
3
Ease of use and comfort

101
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Rear screen demist - defrost
The control button is located on the air conditioning system control panel.
Switching on
The rear screen demisting/defrosting can only operate   when   the   engine   is   running.
F
 
P
ress   this   button   to   demist /defrost   the  
r

ear   screen   and   (depending   on   version)  
t

he   door   mirrors.   The   indicator   lamp  
a

ssociated   with   the   button   comes   on.
Switching off
The demisting/defrosting switches off automatically   to   prevent   an   excessive  
c

onsumption   of   current.
F
 
I
t   is   possible   to   stop   the   demisting/
defrosting
  operation   before   it   is   switched  
o

ff   automatically   by   pressing   the   button  
a

gain.   The   indicator   lamp   associated   with  
t

he   button   goes   off.
F
 
S
witch   off   the   demisting/defrosting  
o

f   the   rear   screen   and   door   mirrors  
a

s soon as appropriate, as lower
current
  consumption   results   in  
r

educed
 f
uel
 c
onsumption.
3
Ease of use and comfort

103
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
12 V accessory socket
F To  connect   a   12   V   accessory   (max   power:  1
20   W),   lift   the   cover   and   connect   a  
s

uitable
 a
daptor.
Component
 
which
 
protects
 
against
 
sunlight
 f
rom
 
the
 
front
 
or
 
the
 
side,
 
also
 
equipped
 
with
 
an
 
i

lluminated
 v

anity
 m

irror.
F
 
W

ith
 
the
 
ignition
 
on,
 
raise
 
the
 
concealing
 
f

lap;
 
the
 
mirror
 
is
 
illuminated
 
automatically.
This
 
sun
 
visor
 
is
 
also
 
equipped
 
with
 
a
 
ticket
 
h

o l d e r.
Sun visor Illuminated glove box
It has dedicated locations for storing a water b
ottle,   the   vehicle's   handbook   pack...
Its
  lid   has   locations   for   storing   a   pen,   a   pair   of  
g

lasses,   tokens,   maps,   a   cup...
F
 
T
o   open   the   glove   box,   raise   the   handle.
The
  glove   box   is   illuminated   when   the   lid   is  
ope

ned.
It
  gives   access   to   the   passenger's   front   airbag  
d

eactivation switch A .
It
  contains   an   adjustable   ventilation   nozzle   B,
distributing
  the   same   conditioned   air   as   the  
v

ents   in   the   passenger   compartment. The connection of an electrical device
not approved by CITROËN, such as a
USB
  charger,   may   adversely   affect   the  
o

peration   of   vehicle   electrical   systems,  
c

ausing   faults   such   as   poor   telephone  
r

eception or inter ference with displays
in
  the   screens.
3
Ease of use and comfort

104
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
USB Player
This connection box comprises a USB port and a  Jack   auxiliary   socket. When
  connected   to   the   USB   port,   the  
p

ortable   device   charges   automatically.
While   charging,   a   message   is   displayed  
i

f   the   power   consumption   of   the  
p

ortable   device   exceeds   the   current  
d

elivered   by   the   vehicle.
Jack auxiliary socket
The Jack auxiliary socket allows the connection o
f   a   portable   device,   such   as   a   digital   audio  
p

layer, so that your audio files can be heard
through
  the   vehicle's   speakers.
The
  management   of   these   files   is   from   the  
p

ortable
 d
evice.
USB port
The USB port allows the connection of a portable   device,   such   as   a   digital   audio   player  
o

f the iPod
® type or a USB memory stick.
T
he
 
USB
 
player   reads   your   audio   files,   which  
a

re
 
transmitted   to   your   audio   system   and  
p

layed
 
via
 
the   vehicle's   speakers.
The
 
management   of   these   files   is   from   the  
s

teering
 
mounted   controls   or   the   audio   system.For
  more   information,   refer   to   the  
c

orresponding   part   of   the   "Audio   and  
t

elematics"
 se
ction.
The
  USB   also   allows   a   telephone   to   be  
c

onnected   by   a   MirrorLink™   connection,   so  
t

hat   use   can   be   made   in   the   touch   screen   tablet  
o

f   certain   applications   on   the   telephone.
Ease of use and comfort

129
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Automatic illumination of
headlamps
The sidelamps and dipped beam headlamps are   switched   on   automatically,   without   any  
a

ction on the part of the driver, when a low level
of
  external   light   is   detected   or   in   certain   cases  
o

f   activation   of   the   windscreen   wipers.
As
  soon   as   the   brightness   returns   to   an  
a

dequate   level   or   after   the   windscreen   wipers  
a

re   switched   off,   these   lamps   are   switched   off  
a

utomatically   and   the   daytime   running   lamps  
c

ome   on.
Activation
F Turn   ring   A to the "AUTO"  position.   The  a
ctivation   of   the   function   is   confirmed   by  
t

he   display   of   a   message.
Deactivation
F Turn  ring   A to a position other than
"AUTO" .
  The   deactivation   of   the   function   is  
c

onfirmed   by   the   display   of   a   message.
Operating fault
In the event of a fault with the
sunshine  sensor,   the   lighting   come  
o

n,   this   warning   lamp   is   displayed  
o

n   the   instrument   panel   and/or   a  
m

essage   appears   in   the   screen,  
a

ccompanied   by   an   audible   signal.
Contact
  a   CITROËN   or   a   qualified  
w

orkshop   workshop.
In
 
fog   or   snow,   the   sunshine   sensor  
m

ay
 
detect   sufficient   light.   Therefore,  
t

he
 
lighting   will   not   come   on  
au

tomatically.
Do not cover the sunshine sensor,
coupled with the rain sensor and
located in the centre of the windscreen
behind
  the   rear   view   mirror;   the  
a

ssociated   functions   would   no   longer  
be c

ontrolled.
4
Lighting and visibility