2016 Citroen C4 ignition

240
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
Repair procedure
F Switch  off   the   ignition.
1. Sealing
F Uncoil  the   white   pipe   G  f ully.
F  U nscrew   the   cap   from   the   white   pipe.
F

C
onnect the white pipe to the valve of the
tyre
  to   be   repaired. F
 C onnect   the   compressor's   electric   plug   to  t
he   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   and   leave   the   engine  
r

unning.
F

T

urn the selector A to the
"sealant"
 p

osition.
F
 
C

heck
 
that
 
the
 
switch
 
B is in
position "O" .
Take
  care,   this   product   is   harmful   (e.g.
 e

thylene-glycol,   colophony...)   if   swallowed
 a

nd   causes   irritation   to   the   eyes.
Keep this product out of the reach of
children.
Avoid
 
removing
 
any
 
foreign
 
bodies
 
w

hich
 
have
 
penetrated
 
into
 
the
 
tyre. Do
  not   start   the   compressor   before  
c

onnecting   the   white   pipe   to   the   tyre  
v

alve:   the   sealant   product   would   be  
e

xpelled   through   the   pipe.
In the event of a breakdown

247
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
Removing a wheel
* position P for an automatic gearbox.
List of operations
Parking the vehicle
Immobilise the vehicle where it does not b
lock   traffic:   the   ground   must   be   level,  
s

table   and   non-slippery   ground.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   lock   the   wheels.
Check
  that   the   braking   warning   lamps  
i

n   the   instrument   panel   are   on   (not  
f

lashing).
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
If
  necessary,   place   a   chock   under   the  
w

heel   diagonally   opposite   the   wheel   to  
be c

hanged.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.F
 
R
emove   the   bolt   cover   from   each   of  
t

he   bolts   using   the   tool   3   (according   to  
e

quipment).
F
 
F
it   the   security   socket   4 on the
wheelbrace


1   to   slacken   the   security   bolt.
F
 
S
lacken   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
8
In the event of a breakdown

266
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
When your vehicle's battery is discharged, the engine   can   be   started   using   a   slave   battery  
(

external   or   on   another   vehicle)   and   jump   lead  
c

ables.
Starting using another
battery
First check that the slave battery has a n ominal   voltage   of   12   V   and   a   capacity  
a

t   least   equal   to   that   of   the   discharged  
b

attery.
Do
  not   try   to   start   the   engine   by  
c

onnecting   a   battery   charger.
Do
  not   disconnect   the   (+)   terminal   when  
t

he   engine   is   running. F
 
S
tart   the   engine   of   the   vehicle   with   the  
g

ood   battery   and   leave   it   running   for   a   few  
m

inutes.
F  
O
perate   the   starter   on   the   broken   down  
v

ehicle   and   let   the   engine   run. I
f   the   engine   does   not   start   straight   away,  s
witch   off   the   ignition   and   wait   a   few  
m

oments   before   trying   again.
F
 
R
emove   the   plastic   cover   from  
the
  (+)   terminal,   if   your   vehicle   has   one.
F

C
onnect the red cable to the positive
terminal
  (+)   of   the   flat   battery   A, then to the
positive
  terminal   (+)   of   the   slave   battery   B.
F
 
C
onnect   one   end   of   the   green   or   black  
c

able   to   the   negative   terminal   (-)   of   the  
s

lave battery B   (or   earth   point   on   the   other  
v

ehicle).
F
 
C
onnect  
t
he  
o
ther  
e
nd  
o
f  
t
he  
g
reen  
o
r  
b
lack  
c

able to the earth point C   on   the   broken  
d

own   vehicle   (or   on   the   engine   mounting).F
 
W
ait   until   the   engine   returns   to   idle   then  
d

isconnect   the   jump   lead   cables   in   the  
r

everse
 o
rder.
F
 
R
efit   the   plastic   cover   to   the   (+)   terminal,   if  
y

our   vehicle   has   one.
In the event of a breakdown

267
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F F ollow the instructions for use provided by
the
  manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered  
w
ith
 s
ulphate
 (

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
Reinitialisation after
reconnection
After any reconnection of the battery, switch on
the  ignition   and   wait   at   least   one   minute   before  
s

tarting,   to   allow   time   for   the   initialisation   of   the  
e

lectronic   systems.
By
  referring   to   the   corresponding   sections,   you  
s

hould   set   or   initialise   the   following   systems  
y

ourself:
-

o
ne-touch electric windows,
-
 
t
ime   and   date,
-
 
a
udio   and   navigation   system   settings.
Check
  that   no   alert   message   or   warning   lamp  
c

omes   on   after   switching   on   the   ignition.
However,
  if   minor   problems   persist   after  
c

arrying   out   these   operations,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
Reconnecting the (+) cable
F Position  the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
D
o   not   apply   excessive   force   on   the  
t

ab   as   locking   will   not   be   possible   if   the  
c

lamp   is   not   positioned   correctly;   start  
t

he   procedure   again.
With Stop & Start, the battery does not
have
 
to
 
be
 
disconnected
 
for
 
charging.
Before disconnecting the battery
Wait 2 minutes after switching off the ignition b
efore   disconnecting   the   battery.
Close the windows and the doors before
disconnecting
  the   battery.
8
In the event of a breakdown

281
C4-2_en_Chap10a_BTA_ed02-2015
Operation of the system
When the ignition is switched on, the   green   indicator   lamp   comes  
o

n   for   3   seconds   indicating   that  
t

he   system   is   operating   correctly.
The
  orange   indicator   lamp  
f

lashes   then   goes   off:   the   system  
h

as   a   fault.
The
 
orange
 
indicator   lamp   is   on   fixed:   the   back-
up
 
battery
 
should   be   replaced.
In
 
both
 
cases,
  the   emergency   and   assistance  
c

alls
 
service
 
may   not   work.
Contact
 
a
 
qualified   repairer   as   soon   as  
p

ossible. The
 
fault   with   the   system   does   not  
p

revent
  the   vehicle   being   driven. Press
  this   button   for   more   than  
2   seconds   to   request   assistance  i
f   the   vehicle   breaks   down.
A
  voice   message   confirms   that  
t

he   call   has   been   started*.
*
  
T
hese   services   are   subject   to   conditions   and  
a

vailability.
  

Consult   a   CITROËN   dealer.
Pressing
  this   button   again   immediately   cancels  
t

he   request.
The
  cancellation   is   confirmed   by   a   voice  
m

essage. If you purchased your vehicle outside
the
  CITROËN   dealer   network,   we  i
nvite   you   to   have   a   dealer   check   the  
c

onfiguration   of   these   services   and,   if  
d

esired,   modified   to   suit   your   wishes.
In
  a   multi-lingual   country,   configuration  
i

s possible in the official national
language
  of   your   choice.
For technical reasons, particularly
to
  improve   the   quality   of   Telematic  
s

ervices   to   customers,   the  
m

anufacturer   reserves   the   right   to   carry  
o

ut   updates   to   the   vehicle's   on-board  
t

elematic   system.
Localised Assistance Call
.
Audio and Telematics

285
C4-2_en_Chap10b_SMEGplus_ed02-2015
With the engine running, press to mute   the   sound.
With
  the   ignition   off,   press   to   switch  
t

he   system   on.
Volume
  adjustment   (each   source  
i

s
 i
ndependent,
 i
ncluding
 t
raffic
 a

nnouncements   (TA)   and   navigation  
i

nstructions).
Select
 
the
 
audio
 
source
 
(depending
 
on
 
ve

rsion):
-
 
F

M
 
/
 
DAB
 
/
 
AM*
 
stations.
-
 
U

SB
 
memory
 
stick.
-
 
C

D
 
player
 
(located
 
in
 
front
 
panel).
-
 
S

martphone
 
via
 
MirrorLink
TM or CarPlay®.
-
T
elephone connected by Bluetooth* and
using
 
Bluetooth*
 
audio
 
streaming.
-
 
M

edia
 
player
 
connected
 
to
 
the
 
auxiliary
 
s

ocket
 
( jack,
 
cable
 
not
 
supplied).
-
 
J

ukebox*,
 
after
 
first
 
copying
 
audio
 
files
 
to  
t

he
 
internal
 
memory
 
of
 
the
 
system. *
  Depending   on   equipment.
Short-cuts:
 
using
 
the
 
virtual
 
buttons
 
in
 
the
 
u

pper band of the touch screen tablet, it is
possible
 
to
 
go
 
directly
 
to
 
the
 
selection
 
of
 
audio  
s

ource,
 
the
 
list
 
of
 
stations
 
(or
 
titles,
 
depending  
o

n
 
the
 
source).
The screen is of the "resistive" type, it
is 
n
ecessary  
t
o  
p
ress  
f
irmly,  
p
articularly  
f

or   "flick"   gestures   (scrolling   through   a  
l

ist,   moving   the   map...).   A   simple   wipe  
w

ill   not   be   enough.   Pressing   with   more  
t

han   one   finger   is   not   recognised.
The   screen   can   be   used   when   wearing  
g

loves.   This   technology   allows   use   at  
a

ll
 t
emperatures.
In   very   hot   conditions,   the   volume   may  
b

e   limited   to   protect   the   system.   The  
r

eturn   to   normal   takes   place   when  
t

he   temperature   in   the   passenger  
c

ompartment   drops. To clean the screen, use a soft
non-abrasive
  cloth   (spectacles   cloth)  
w

ithout   any   additional   product.
Do   not   use   pointed   objects   on   the  
sc

reen.
Do not touch the screen with wet
hands.
.
Audio and Telematics

341
C4-2_en_Chap10b_SMEGplus_ed02-2015
The services available depend on
the  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith only one profile depends on the
telephone.
  The   three   profiles   may   all  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help,   ...).
The
  recognised   telephone  
a

ppears   in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on. On return to the vehicle, if the last telephone
connected
  is   present   again,   it   is   reconnected  
a

utomatically   and   within   around   30   seconds  
a

fter   switching   on   the   ignition   the   pairing   is  
d

one without any action on your part, with
(Bluetooth
 a

ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.
Depending
  on   the   type   of   telephone,  t
he   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone c
onnected   when   the   ignition   was   last   switched  
o

ff   is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
.
Audio and Telematics

366
C4-2_en_Chap10c_RD5_ed02-2015
A message is displayed on the screen of the telephone:   enter   the   same   code   and   confirm.
Select "
Bluetooth connection " and
confirm.
A virtual keypad is displayed on the s creen:   enter   a   code   with   at   least   4   digits a

nd   conform   with   OK.
Select "Search for a device".
Select the telephone to be connected
from
  the   list.   Only   one   telephone   can  
b

e   connected   at   a   time.
A window is displayed "
Search in progress…".
In
 
some
 
cases,   the   reference   number   of   the  
t

elephone
  or   the   Bluetooth   address   may   appear  
i

nstead
 
of
  the   name   of   the   telephone.
If pairing fails, try again; the number of attempts is not limited.
Accept the connection to the telephone.
A   message   appears   in   the   screen   to   confirm  
s

uccessful
 c
onnection.
Pairing
  can   also   be   initiated   from   the  
t

elephone   by   searching   for   detected  
B

luetooth   devices.
The directory and the calls list can be
accessed after the synchronisation
period
  (if   the   telephone   is   compatible).
Automatic
  connection   must   be  
c

onfigured   in   the   telephone   to   allow  
t

he   connection   each   time   the   vehicle  
i

s   started.
Press MENU
.
Telephone
Pairing a telephone
First connection
The services offered depend on the network, t
he   SIM   card   and   the   compatibility   of   the  
B

luetooth   telephone   used.
Consult
  your   telephone's   manual   and   your  
o

perator to find out which services are
available
  to   you.
As
  a   safety   measure   and   because   they  
r

equire   prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
o

f   the   Bluetooth   mobile   telephone   with  
t

he   Bluetooth   hands-free   system   of  
y

our   audio   system   must   be   carried   out  
w

ith the vehicle stationary and the
ignition
 o

n.
Visit
  www.citroen.co.uk   for   more  
in

formation
 (
compatibility,
 a
dditional
 h

elp,
 ...
).
Activate
  the   telephone's   Bluetooth   function  
a

nd   ensure   that   it   is   "visible   to   all"   (refer   to   the  
t

elephone   user   guide).
Audio and Telematics