2016 Citroen C1 Screen

61
C1_en_Chap03_ergonomie-confort_ed01-2016
Rear screen demist - defrost
Switching off
Switching on
F Press   this   button   again   to   switch   off   the  h
eated   rear   screen.
 T

he   indicator   lamp   associated   with   the  
b

utton   goes   off.
The
 
heated
 
rear
 
screen
 
can
 
only
 
operate
 
when
 t
he
 
engine
 
is
 
running.
Switch
  off   the   demisting/defrosting  
o

f   the   rear   screen   and   door   mirrors  
(

depending   on   version)   as   soon  
a

s appropriate, as lower current
consumption
  results   in   reduced   fuel  
c

onsumption.
F
 
P

ress
 
this
 
button
 
to
 
demist /defrost
 
the
 
rear
 
s

creen
 
and,
 
depending
 
on
 
version,
 
the
 
d

oor
 
mirrors.
 T

he
 
indicator
 
lamp
 
associated
 
with
 
the
 
b

utton
 
comes
 
on.
The
 
control
 
button
 
is
 
located
 
on
 
the
 
heating   /   ventilation   or   air   conditioning   system   control   panel.
3
Ease of use and comfort

63
C1_en_Chap03_ergonomie-confort_ed01-2016
Front fittings
1. Sun  visor.
2. G love   box.
3.
 A

udio   system,   touch   screen   tablet   or  
s

torage.
4.
 1

2   volt   accessory   socket  
(maximum
  120 W).
 D

o   not   exceed   the   power   rating   to   avoid  
d

amaging   your   accessory.
5.
 U

SB   port.
6.
 A

uxiliary   socket.
7.
 S

torage   or   cup   holder.
8.
 C

up   holder.
9.
 D

oor   pockets.
 S

torage   for   a   bottle   of   water.
3
Ease of use and comfort

65
C1_en_Chap03_ergonomie-confort_ed01-2016
It permits the connection of a portable device to   listen   to   your   music   files   via   the   vehicle's  
s

peakers.
The
  management   of   the   files   is   done   using   your  
p

ortable
 d
evice.
It
 
permits
 
the
 
connection
 
of
 
a
 
portable
 
device,
 s
uch
 
as
 
a
 
digital
 
audio
 
player
 
of
 
the
 
iPod® type
or
 
USB
 
memory
 
stick.
It
 
reads
 
the
 
audio
 
files,
 
which
 
are
 
sent
 
to
 
your  
a

udio
 
system
 
to
 
be
 
heard
 
via
 
the
 
vehicle's  
s

peakers.
You
 
can
 
manage
 
these
 
files
 
using
 
the
 
steering  
m

ounted
 
controls
 
or
 
those
 
on
 
the
 
audio
 
system  
c

ontrol
 
panel.
Auxiliary socket
USB port
For more information on the use of t
his   equipment,   refer   to   the   "Audio   and  
t

elematics"
 se
ction.
For
 
more
 
information
 
on
 
the
 
use
 
of
 
t

his
 
equipment,
 
see
 
the
 
"Audio
 
and
 
t

elematics"
 se

ction.
Connected
 
to
 
the
 
USB
 
port,
 
the
 
p

ortable
 
device
 
charges
 
automatically
 
w

hile
 
in
 
use. The
  USB   port   and   auxiliary   Jack   socket  
a

lso   allow   connection   of   a   smartphone.
-  
e
ither   by   MirrorLink
TM connection
using
 
the
 
USB
 
port
 
only,
-
 
o

r
 
by
 
iPhone
® connection using b
oth
 
the
 
USB
  port   and   the   auxiliary  
J

ack
 
socket.
These connections allow you to use
certain applications on the telephone in
the
 
touch
 
screen
 
tablet.
3
Ease of use and comfort

86
C1_en_Chap04_conduite_ed01-2016
The speed limiter cannot, in any circumstances,   replace   the   need   to o

bserve   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.
Speed limiter (PureTech 82 engine)
The speed limiter is switched on  manually: t
his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
System
  which   prevents   the   vehicle   from   exceeding   the   speed   programmed   by   the   driver.Steering mounted controls
The controls are grouped together on this c
ontrol   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 S

peed   limiter   on   /   pause:   by   pulling   the  
c

ontrol   stalk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   mode   selection   indication.
6.
 S

peed   limiter   on   /   pause   indication.
7.
 S

peed   value   setting.
The
 
programmed
 
speed
 
remains
 
in
 
the
 m

emory
 
when
 
the
 
ignition
 
is
 
switched
 
off.
Driving

89
C1_en_Chap04_conduite_ed01-2016
Speed limiter (VTi 68 engine)
System which prevents the vehicle from exceeding the speed programmed by the driver.
T he   speed   limiter   is   switched on
 m
anually:
 t

his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
The
  programmed   limit   speed   is   erased  
w

hen   switching   off   the   ignition.
Steering mounted controls
The controls are grouped together on this control   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 P

rogramming   the   speed
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 R

estore   speed   limiter
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 P

ause   speed   limiter:   by   pulling   the   control  
s

talk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   on   /   pause   indication.
6.
 S

peed   value   setting.
The speed limiter cannot, in any circumstances,   replace   the   need   to   observe s

peed   limits,   nor   can   it   replace   the   need   for
 v

igilance   on   the   part   of   the   driver.
If you choose to display other information (trip  A
  for   example),   the   speed   limiter  
i

nformation   is   automatically   displayed   again  
a

fter   about   6   seconds.
4
Driving

92
C1_en_Chap04_conduite_ed01-2016
Reversing camera
The reversing camera is activated automatically when reverse gear is engaged.
T he   reversing   camera   cannot   in   any  
c

ircumstances   replace   the   need   for   the  
v

igilance   on   the   part   of   the   driver.The
  image   is   provided   in   the   touch   screen  
o

nly,   with   an   indication   of   the   limit   of   the   rear  
b

umpers   (red   line)   and   the   general   direction   of  
t

he   vehicle   (blue   lines).Clean
  the   reversing   camera   regularly  
u

sing   a   soft,   dry   cloth.
The
  field   of   vision   covered   by   the   camera   is  
l

imited:   objects   in   the   immediate   proximity   of  
t

he   bumper   or   located   below   it   are   not   visible.
The
  camera's   wide-angle   lens   deforms   the  
i

mage   presented   in   the   screen:   the   distances  
v

isible   in   the   screen   may   be   different   from  
t

he   true   distances.   This   deformation   varies  
a

ccording   to   the   loading   of   the   vehicle   and   the  
s

lope   of   the   road.
High pressure jet washing
When
  washing   your   vehicle,   do   not  
d

irect   the   lance   within   30   cm   of   the  
c

amera   lens.
Never
  reverse   the   vehicle   looking   only  
a

t   the   screen.
It
  is   normal   to   be   able   to   see   part   of   the   number  
p

late   at   the   bottom   of   the   screen.
Driving

94
C1_en_Chap04_conduite_ed01-2016
Deactivation
Operating faultDisplays in the instrument panel
The detection may be impeded:
-  i f   the   ground   markings   are   worn,
-
 
i
f   there   is   little   contrast   between   the   markings   on   the   ground   and   the   road   sur face,
-
 
i
f   the   windscreen   is   dirty,
-
 
i
n   certain   extreme   weather   conditions:   fog,   heavy   showers,   bright   sunlight   or   direct  
e

xposure   to   the   sun   (low   sun,   leaving   a   tunnel...)   and   shadows.F
 
P
ress   this   button   again.
The   status   of   the   system   remains   in   the  
m

emory   when   the   ignition   is   switched   off.
In the event of a malfunction, this (orange) w
arning   lamp   comes   on   in   the   instrument   panel.
Contact a CITROËN dealer or a qualified workshop   without   delay.
Display
 
in
 
the
 
instrument
 
panel
Comments
The
 
function
 
has
 
been
 
activated
 
(green
 
indicator).
The
 
system
 
has
 
identified
 
a
 
marking
 
on
 
the
 
ground
 
(green
 
i

ndicator).
The
 
system
 
is
 
alerting
 
you
 
that
 
a
 
road
 
marking
 
is
 
being
 
crossed
 (

green
 
and
 
orange
 
warning).
The
 
display
 
of
 
this
 
warning
 
is
 
accompanied
 
by
 
an
 
audible
 
signal.
Driving

101
C1_en_Chap05_eclairage-visibilite_ed01-2016
Automatic illumination of
headlamps
Switching on
F Turn  the   ring   to   the   "AUTO "   position.
Using
 
a
 
sunshine
 
sensor,
 
if
 
a
 
low
 
level
 
of
 
a

mbient
 
light
 
level
 
is
 
detected,
 
the
 
sidelamps
 
a

nd
 
dipped
 
beam
 
headlamps
 
come
 
on
 
a

utomatically,
 
without
 
any
 
action
 
by
 
the
 
driver.
When
 
the
 
ambient
 
light
 
returns
 
to
 
a
 
sufficient
 
l

evel
 
or
 
the
 
wipers
 
are
 
switched
 
off,
 
the
 
lighting
 
i

s
 
switched
 
off
 
automatically.
The
 
sensor
 
is
 
located
 
at
 
the
 
base
 
of
 
the
 
w

indscreen.
Switching off
F Turn   the   ring   to   another   position.
In   foggy   weather   or   in   snow,   the  
s

unshine   sensor   may   detect   sufficient  
l

ight.   The   lighting   will   not   come   on  
au

tomatically.
Do not cover the sunshine sensor, the
associated
  functions   will   no   longer   be  
c

ontrolled.
5
Lighting and visibility