2016 CITROEN C-ELYSÉE display

02
232
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
CD
Information and adviceOn   a   given   disc,   the   CD   player   can   read   up   to   255   MP3   files   spread  
over

  8   levels.   However,   it   is   advisable   to   keep   to   a   limit   of   two   levels  
to reduce

  the   access   time   before   the   CD   is   played.
The
  folder   structure   is   not   observed   during   playback.
In
  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   standards   ISO   9660   level   1.2   or   Joliet.
If
  the   disc   is   recorded   in   another   format,   it   may   not   be   played   correctly.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  a   given   disc,   with   as   low   a   speed   as   possible   (4x   maximum)   for  
optimum

  sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.
The

  audio   system   can   only   play   files   with   ".mp3",   ".wma"   or   ".wav"  
extensions.
A
 

high   compression   level   can   degrade   the   sound   quality.
Playlists
  accepted   are   types   .m3u   and   .pls.
The
  system   can   recognise   up   to   5   000   files   in   500   folders   on   8   levels.
It
  is   advisable   to   restrict   file   names   to   20   characters   without   using  
special

  characters   (e.g.   "   ? ;   ù)   to   avoid   any   playing   or   displaying  
problems.

02
233
C-elysee_en_Chap12b_RDE1_ed01-2016
CD
AUDIO
Playing a compilationInsert   an   MP3   compilation   on   the   CD   player.
The
  system   constitutes   playlists   (in   temporary   memory)   which   may  
take

  between   a   few   seconds   to   several   minutes.
To
  play   a   disc   already   inserted,  
press

SRC/BAND
 
several   times   in  
succession until "CD" 

is   displayed. Press one of the buttons to select the
previous
  or   next   track.
Press one of the buttons to select the
previous
  or   next   folder   depending   on   the  
classification

  selected.
Press
  and   hold   one   of   the   buttons   for  
fast

  forward   or   backward.

02
234
C-elysee_en_Chap12b_RDE1_ed01-2016
Select a line in the list.
Jump   a   page. Go
  back   one   level.
Select
  a   folder   /Playlist.
Start   play   of   the   track   selected.
Go   back   to   the   first   level   to   select   the   track   classification:
-
 
By
  Folders:   all   folders   containing   audio   files   recognised   on   the  
peripheral,

  in   alphabetical   order,   ignoring   the   folder   structure.
-
 
By
  Playlist:   depending   on   the   playlists   saved.
Press LIST
 

to   display   the   compilation  
folder

  structure.
AUDIO

02
235
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
Auxiliary socket (AUX)
Auxiliary JACK socket
Connect  the   portable   device   to   the   auxiliary   Jack   socket   using   a  
suitable

  cable   (not   supplied).
The
  auxiliary   Jack   socket   permits   the   connection   of   a   portable  
device.
Press the

SRC/BAND button
successively
  and   select  
"AUX". First

  adjust   the   volume   on   your   portable   device.
Then
  adjust   the   volume   of   the   audio  
system.
The

  display   and   management   of   controls   is   on   the  
portable

  device.

03
237
C-elysee_en_Chap12b_RDE1_ed01-2016
Press ¯ to display the audio settings menu.
The
 
settings
  available   are:
-
 
AMBIANCE,
-

 
BASS,
-

 
TREBLE,
-

 
LOUDNESS,
-

 
BALANCE
  (L/R),
-
 
AUT

O
 
VOLUME. The
 
AMBIANCE,
 
TREBLE
  and   BASS   settings   are   different   and  
independent

  for   each   sound   source.
Select
  the   settings   to   adjust. Adjust
  the   setting   then   confirm   by  pressing
 OK .
AUDIO SETTINGS

04
238
C-elysee_en_Chap12b_RDE1_ed01-2016
Radio
MENU
Traffic
RDS
TEXT INFO
Media
Play
Normal
Random
Displaying
SCROLLING
1
2
2
2
1
2
3
3
1
2
Random all
Repeat3
3
Unit
Celsius
Fahrenheit
1
2
2
SCREEN MENU MAP(S)
TEXT INFO2
Language1
MAIN FUNCTION
Option A1
Option  
A1
1
Option A
Option B...1
2
3
1

240
C-elysee_en_Chap12b_RDE1_ed01-2016
FREqUENTLY ASKED q UESTIONS
qUESTION ANSWER SOLUTION
The
 
quality   of   reception  
of

 
the
 
radio   station  
listened

  to   gradually  
deteriorates

  or   the   stored  
stations

  do   not   function  
(no

 
sound,   87.5 MHz   is  
displayed...). The

  vehicle   is   too   far   from   the   transmitter   used   by   the   station   listened  
to

  or   there   is   no   transmitter   in   the   geographical   area   through   which   the  
vehicle

  is   travelling. Switch
  on   the   RDS   function   to   enable   the   system  
to

  check   whether   there   is   a   more   powerful  
transmitter

  in   the   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)   block  
reception,

  including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not   indicate  
a

  failure   of   the   audio   equipment.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
through

  a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
Sound
  cut-outs   of   1   to  
2 seconds

  in   radio   mode.During
  this   brief   sound   cut-out,   the   RDS   searches   for   any   frequency  
permitting

  better   reception   of   the   station.Switch
  off   the   RDS   function   if   the   phenomenon   is  
too

  frequent   and   always   on   the   same   route.
The
 
traffic   announcement  
(T

A)
 
is
  displayed.   I   do  
not

 
receive   any   traffic  
information. The

  radio   station   does   not   broadcast   traffic   information.Tune
  to   a   radio   station   which   broadcasts   traffic  
information.
The

 
stored   stations   are  
not

 
found   (no   sound,  
87.5 MHz

  is   displayed...). An
  incorrect   waveband   is   selected. Press
  the   SRC   button   to   return   to   the   waveband  
(AM,

  FM1,   FM2)   on   which   the   stations   are   stored.

241
C-elysee_en_Chap12b_RDE1_ed01-2016
FREqUENTLY ASKED q UESTIONS
qUESTION ANSWER SOLUTION
The
 
CD   is   ejected  
automatically

  or   is   not  
played

  by   the   player. The
  CD   is   inserted   upside   down,   is   unplayable,   does   not   contain   any  
audio

  data   or   contains   an   audio   format   which   the   player   cannot   play.
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   equipment. -
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 
Check
  the   content   in   the   case   of   a   recorded  
CD:

  consult   the   advice   in   the   "Audio"   section.
-
 
The
  audio   system's   CD   player   does   not   play  
DVDs.
-

 
Due
  to   their   quality   level,   certain   writeable  
CDs

  will   not   be   played   by   the   audio   system.
The
 
CD   player   sound   is  
poor

. The
  CD   used   is   scratched   or   of   poor   quality.Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   settings   (bass,   treble,   ambiance)   are   unsuitable.Set
  the   treble   or   bass   level   to   0,   without   selecting  
an

  ambiance.
In
 
"Random   all"   play,  
not

 
all
 
of   the   tracks   are  
played. In

  "Random   all"   play,   the   system   can   only   take   into   account   up   to  
999
  tracks.
With
 
the   engine   off,   the  
audio

 
system   switches  
of

f
 
after   a   few   minutes  
of

 
use. When
  the   engine   is   switched   off,   the   audio   system   operating   time  
depends

  on   the   battery   charge.
The
  switch-off   is   normal:   the   audio   system   switches   to   economy   mode  
and

  switches   off   to   prevent   discharging   the   vehicle's   battery.Start
  the   vehicle's   engine   to   increase   the   battery  
charge.
The

 
message   "the   audio  
system

  is   overheated"  
appears

  on   the   display. In
  order   to   protect   the   installation   if   the   surrounding   temperature   is   too  
high,

  the   audio   system   switches   to   an   automatic   thermal   protection   mode  
leading

  to   a   reduction   of   the   volume   or   stopping   of   the   playing   of   the   CD.Switch
  the   audio   system   off   for   a   few   minutes   to  
allow

  the   system   to   cool.