152
Berlingo-2-VP_en_Chap06_accessoire_ed01-2016
Equipment
OTHER ACCESSORIES
These accessories and parts, having
been tested and approved for reliability
and safety, are all adapted to your
vehicle.
A
wide range of recommended
accessories and genuine parts is
available.
a further range is also available,
structured
around comfort, leisure and
maintenance:
Anti-theft
alarm, window etching, first
aid
kit, high visibility vest, front and
rear
parking sensors, warning triangle,
security
bolts for alloy wheels, ...
Seat
covers compatible with airbags
for the front seats, bench seat, rubber
mats,
carpet
mats,
snow
chains,
blinds,
tailgate
bicycle carrier, ...
To
prevent the mat from becoming
caught
under the pedals:
-
ensure
that the mat and its fixings
are positioned correctly
,
-
never
fit one mat on top of another.Audio
equipment, hands-free kit, speakers,
CD changer, satellite navigation
system,
USB
box,
V
ideo
kit,
...
Regardless
of the audio and telematic
equipment
offered on the market, the
technical constraints associated with
the
fitting of equipment of these product
groups
mean that the special features
of
the equipment and its compatibility
with the capacities of your vehicle's
standard
equipment must be taken into
account.
Please ask a CITROËN dealer
for
more information before fitting such
equipment.
Maximum weights on bars
-
T
ransverse bars on longitudinal
bars:
75 Kg (these bars are not
compatible
with the Modutop roof).
Installing radiocommunication
transmitters
You are advised to contact a CITR
o Ë n
dealer before installing accessory
radiocommunication
transmitters with
external
aerial on your vehicle.
The
CITROËN dealer network
will
inform you of the specification
(frequency
band, maximum output
power
, aerial position, specific
conditions of installation) of the
transmitters
which can be fitted, in
accordance with the Motor V
ehicle
Electromagnetic
Compatibility
Directive (2004/104/EC).Front
mud flaps, rear mud flaps, 15/17 inch
alloy wheels, wheelarch
trim,
leather steering wheel, ...
Screenwash, interior and exterior
cleaning
and maintenance products,
spare
bulbs, ...
The
fitting of electrical equipment
or accessories which are not
recommended
by CITROËN may
result in a failure of your vehicle's
electronic
system. Please note this
specific
warning.
Y
ou are advised
to contact a dealer to be shown the
range
of recommended equipment or
accessories.
d
epending on the country in which
the
vehicle is sold, it is compulsory
to have a high visibility vest, warning
triangle and spare bulbs available in
the
vehicle.
174
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
4. Removing the wheel with punctured tyre
- Position the foot of the jack on the ground and ensure that it is directly
below
the front or rear jacking
point provided on the underbody
,
whichever is closest to the wheel to
be
changed.
-
Extend
the jack until its head
comes
into contact with the jacking
point used; the vehicle's contact
area
A must be engaged with the
head
of the jack.
-
Raise the vehicle until there is
sufficient
space between the
wheel and the ground, so that (not
punctured) spare wheel can be
easily
fitted.
-
Resume
and complete the
unscrewing
of the wheel bolts.
-
Remove
the bolts and remove the
wheel.
-
Remove
the
wheel
trim.
-
Loosen the wheel bolts and start
unscrewing
them. Ensure
that the jack is stable, the foot of
the jack must be in contact with the
ground,
and directly below the jacking
point
used.
If the ground is slippery or loose, the
jack
may slip or drop - Risk of injury!
Ensure
that the jack is positioned only
at
one of the jacking points under the
vehicle,
making sure that the vehicle's
contact surface is centred on the head
of
the jack.
Otherwise
there is a risk of damage
to
the vehicle and/or of the jack
dropping -
Risk of injury!
Do
not extend the jack until you have
started unscrewing the bolts on the
wheel to be changed and have placed
the
chock under the wheel diagonally
opposite.
Changing a wheel
175
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
- Position the wheel on the hub and
start tightening the bolts by hand.
-
Carry out an initial tightening of the
bolts
using the wheelbrace.
5. Fitting the spare wheel
- Lower the vehicle completely by folding
the jack, then remove the
jack.
-
T
ighten the bolts again using the
wheelbrace,
tighten them fully
without
forcing them.
-
Place the wheel to be repaired in
the
carrier. -
Secure the carrier on the hook then raise the carrier by tightening the
bolt
with the wheelbrace.
-
Fully
tighten the bolt, then check
that
the wheel is held flat against
the
floor.
If this is not the case, repeat the
operation.
n
ever go underneath a vehicle
that
is supported only by a jack
(use
a stand).
n
ever use a power driver in place of
the
wheelbrace.
QUICk HELP
8
Changing a wheel
176
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
FITTING THE WHEEL
TRIM
The tyre valve must be centred in the wheel
trim cut-out.
This
position is essential for fitting the
wheel
trim correctly on the steel wheel.
(If
the valve is not correctly aligned with
the
cut-out, the anti-rotation system
will be in contact with the heads of the
wheel
bolts and risks being damaged
if
the user persists in fitting the wheel
trim
in this incorrect position). -
Ensure that all of the clips are
engaged except the last one
(opposite
the valve hole).
-
Strike
the wheel trim with the palm
of your hand, opposite the valve
in
the area of the last fixing clip
(always
in the direction of clipping).
-
Ensure that the outer edge of
the
wheel trim is not deformed or
pushed
into the wheel:
●
Correct
position for the edge of
the
wheel trim.
●
Incorrect
position for the edge of
the
wheel trim.
6. Refitting the repaired wheel
The wheel is refitted as described in step 5, not forgetting to refit the wheel
trim.
Refer
to the "Instruments and
controls" section of chapter 3,
"T
yre under-inflation detection"
part,
for recommendations after
changing
a wheel fitted with a tyre
under-inflation
detection sensor.
Refer
to the "Identification
markings"
section of chapter 9 to
locate
the tyre label.
The spare wheel is not designed
to
be used over long distances.
Have the tightening of the bolts
and
the tyre pressure checked by
a
CITROËN dealer or a qualified
workshop
as soon as possible.
Have the original wheel repaired
and
refitted by a CITROËN dealer
or
a qualified workshop as soon as
possible.
Changing a wheel
184
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
Rear lamps
This procedure requires the use of
the spanner supplied with the tools for
changing a wheel.
When
refitting, take care to
reposition the tabs and the wiring
correctly to avoid trapping the
wiring.
a
fter changing the rear direction
indicator
bulb, the reinitialisation time is
above
2 minutes.
-
Move aside the 4 tabs then extract
the
bulb holder.
-
Remove
the faulty bulb by
pressing it lightly while turning it
anticlockwise.
-
Change
the bulb.
When
removing the lamp unit:
-
with
tailgate, pull the lamp unit
towards the centre of the vehicle,
-
with
hinged doors, pull the lamp
unit
towards you.
For
more
information
on
bulbs,
refer
to
the
"Types
of
bulb".
1.
Brake lamps / sidelamps
T
ype B,
P21/5W
-
21/5W
2.
Direction indicators
T
ype B,
PY21W
-
21W
(amber)
3.
Reversing lamps
T
ype B, P21W - 21W
4.
Foglamps
T
ype B, P21W - 21W
High pressure jet washing When using this type of washing
on stubborn dirt, do not persist on
the
headlamps,
the
other
lamps
and
their
edges
to
avoid
damaging
their
coating
and
seals. Chapter
9, "Changing a wheel"
section.
-
Identify the failed bulb, then open
the
rear doors to 180°.
Chapter
3, "Access" section.
-
Remove
the two fixing bolts using
the
spanner provided.
-
Pull
the lamp unit from the outside.
-
Holding
the lamp, disconnect the
electrical
connector.
Changing a bulb