2016 CADILLAC CT6 height adjustment

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-9235592) -
2016 - crc - 11/6/15
In Brief 15To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
See Head Restraints 0 58 and
Power Seat Adjustment 0 60 .
Safety Belts
Refer to the following sections for
important information on how to use
safety belts properly:
.
Safety Belts 0 70 . .
How to Wear Safety Belts
Properly 0 71 .
.
Lap-Shoulder Belt 0 72 .
.
Lower Anchors and Tethers for
Children (LATCH System) 0 95 .
Passenger Sensing
System
United States
Canada
The passenger sensing system
turns off the front outboard
passenger frontal airbag and knee
airbag under certain conditions. No other airbag is affected by the
passenger sensing system. See
Passenger Sensing System 0 82 .
The passenger airbag status
indicator will light on the overhead
console when the vehicle is started.
See Passenger Airbag Status
Indicator 0 130 .
Mirror Adjustment Exterior Mirror
1. Move the selector switch to L
(Left) or R (Right) to choose
the driver or passenger mirror.

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-9235592) -
2016 - crc - 11/6/15
68 Seats and Restraints
Lumbar Adjustment If a child restraint is installed, see
Rear Seats 0 66 .
Platinum Rear Seat Shown
If equipped, the armrest may have
controls for lumbar and upper back
support.
When one of the seat controls is
triggered, a panel display will be
activated from the driver or
passenger seatback. To adjust lumbar support,
if equipped:
1. Toggle the center selection
control to view adjustable seat
options on the display.
2. Select lumbar support.
3. Press and hold the control
forward to increase or rearward
to decrease support.
4. Press and hold the control
upward to raise or downward to
lower the height of the support.
To adjust upper back support,
if equipped:
1. Toggle the center selection
control to view adjustable seat
options on the display.
2. Select upper back support.
3. Press and hold the control
forward to increase or rearward
to decrease support. Rear Seat Armrest
Fixed Center Seat Shown,
Adjustable Center Seat Similar
The rear seat has an armrest in the
center of the seatback. Lower the
armrest and press the button at the
front of the armrest to access the
cupholders.
To fold, press the cupholders into
the seat if they have been opened,
lift the armrest up, and push it
rearward until it is flush with the
seatback.

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-9235592) -
2016 - crc - 11/6/15
Seats and Restraints 73
5. To make the lap part tight, pull
up on the shoulder belt. To unlatch the belt, push the button
on the buckle. The belt should
return to its stowed position.
Always stow the safety belt slowly.
If the safety belt webbing returns
quickly to the stowed position, the
retractor may lock and cannot be
pulled out. If this happens, pull the
safety belt straight out firmly to
unlock the webbing, and then
release it. If the webbing is still
locked in the retractor, see your
dealer.
Before a door is closed, be sure the
safety belt is out of the way. If a
door is slammed against a safety
belt, damage can occur to both the
safety belt and the vehicle.
Shoulder Belt Height Adjuster The vehicle has a shoulder belt
height adjuster for the driver and
right front passenger seating
positions.
Adjust the height so the shoulder
portion of the belt is on the shoulder
and not falling off of it. The belt
should be close to, but not
contacting, the neck. Improper shoulder belt height adjustment
could reduce the effectiveness of
the safety belt in a crash. See How
to Wear Safety Belts Properly 0 71 .
Press the release button and move
the height adjuster to the desired
position. The adjuster can be moved
up by pushing the slide/trim up.
After the adjuster is set to the
desired position, try to move it down
without pushing the release button
to make sure it has locked into
position.