2016 AUDI TT COUPE change time

Downloaded from www.Manualslib.com manuals search engine ..... N
G: CX)
.....
"' U"I
.....
"' .....
Overview of Audi
connect services
Basic functions
Applies to vehicles with Audi connect
F i
g. 113 Audi con nect home page with preview
If available, the Audi connect men u disp lays
functions specific
to certain services in the selec­
tion menu¢ page 96 for that Audi connect serv­
ice .
Basic functions
are found in the options menu
¢page 97 for the corresponding Audi connect
service .
.. Se lect: the I MENU! button >Audi connect> the
desired Audi connect service
> right contro l
button.
Depending on th e A udi connect service selected,
the following functions are available:
Save as preview
You can display the preview in the ove rview of the
selec ted Audi co nnect serv ices CD¢ fig. 113.
Show on map
You can show selected contents on the map and
use them for route guidance.
Read aloud
You can allow the MM! to read out the selected
contents.
Navigate
If a city was added to an entry (such as City
events), you can use it as a navigation destina­
tion
in the M M!.
Audi connect
Refresh
The contents for the selected Audi connec t serv­
ice are refreshed .
Change search area
The set search area can be changed at any time.
Additional informa tion on searc h
areas ca n be
found under¢ page 134.
Close Audi connect service
Regardless of what function is selected, you can
close an Audi connect service
at any time and re­
turn to the A udi connect overview ¢ fig. 113.
Weather
Applies to vehicles with Audi connect
Information on current weather condit ions as
well as weather forecasts for the selected search
area (for ex
ample, In immediate vic inity).
.. Select and confirm Weather.
Flight information
Applies to vehicles with Audi connect
Information on flights and current arrival/depar­
ture times in the selected sear ch area.
.. Select and confirm Flight information.
You ca n sele ct the desire d in fo rmation using the
r
igh t control button.
City events
Applies to vehicles with Audi connect
Inform ation on even ts in vario us ca tegories in
the desired searc h area.
.,. Sele ct a nd confir m City events> left control
butto n > category.
Online news
Applies to vehicles with Audi connec t
Check the most current headlines of your favorite
publicat i
ons in the MMI.
.,. Select Online news> headline.
123

Downloaded from www.Manualslib.com manuals search engine Audi connect
Facebook
Applies to vehicles wit h Audi c o nn ect
You can access the most important functions in
your Facebook account through your MMI.
Requirement:
You must have a Facebook account.
You must have connected your myAudi account
with Facebook.
You must have connected your vehicle with
myAudi ¢ page 122.
... Select Facebook > left control button > desired
function
(for example, News Feed).
The following categories can be selected in the
Facebook menu:
-News Feed: new posts (for example, by friends
or groups) are displayed.
-Timeline : your Facebook timeline is displayed.
-Messages: messages you have received are dis-
played.
-Places nearby: places nearby are displayed
that, for example, were recommended by your
friends. You can narrow the search further by
entering categories.
-Events: events to which you were invited are
displayed.
The following functions are available, depending
on the Facebook category you have selected:
-What's on your mind?: you can publish a new
Facebook status using pre-made templates or
using customized myAudi templates.
-Where are you? : you can specify your current
location and make it visible.
@ Tips
-You can find additional information on con­
necting your myAudi account with Facebook
in the Audi connect (myAudi) operating
manual at www.audi.com/myaudi.
-You can only connect one Facebook account
with your myAudi account.
-Other settings such as account and privacy
settings cannot be changed in the MMI.
124
These changes must be made on the Face­
book website.
-You can also create individual text tem­
plates online at my.audiusa.com.
-Audi connect makes it possible to access
Facebook. Permanent availability cannot be
guaranteed, because that depends on Face­
book.
Twitter
Applies to vehicles wit h Audi connect
You can access the most important functions in
your Twitter account through your MMI .
Requirement:
You must have a Twitter account.
You must have connected your myAudi account
with Twitter.
You must have connected your vehicle with
myAudi ¢page 122.
... Select Twitter > left control button > desired
function
(for example, Trends).
The following categories can be selected in the
Twitter menu:
-My Tweets : News Feed and the Tweets you have
posted are listed.
-Home: the Tweets for everyone you follow are
displayed.
-Trends : topics on Twitter that are currently
popular within a country.
Different functions are available depending on
the Twitter category you have selected:
-New tweet: you can post a new tweet using
pre-made templates or using individualized
myAudi
templates.
- Refresh : the selected Twitter function is re­
freshed.
-Set as favorite : set a Tweet as favorite to show
you liked it.
-Retweet: you can quote a Tweet to share it with
others. .,,.

Downloaded from www.Manualslib.com manuals search engine ..... N
Navigation
Opening navigation
Applies to: veh icles with navigation system
Nav igation
The navigation system directs you to your destination, around traffic incidents and on alternative
routes, if desired.
Fig. 114 Example image: Enter destination menu
•Select: INAV/MAPI button.
After opening
the Navigation menu, the Enter
d
est ina tion menu ¢ fig. 114 appears in the Info­
tainment system display with the following infor­
mation:
CD Input field for free text search¢ page 132
@ Home address r:!;> page 133
® Last destinations¢ page 132
@ Stored favorites C>page 133
If you have connected a cell phone with the MMI,
your directory contacts w ill also be listed if they
have navigation data assigned to them.
Your favorites@) and directory contacts are only
displayed
in the Ente r de stination menu when
you have entered one or more letters using the
input field.
M ap pre view
- Se lect an entry from the list.
When selecting an entry from the list, the corre­
spondi ng destination will always be shown to you
as a map preview®~ fig. 114.
Switching between the destination entry and
the map
- Press the INAV/MAPI button repeatedly until
the map is displayed . Or: select the left control
button > Swit ch to map .
_&.WARNING
-The demands of traffic require your ful l at­
tention. Read and follow the guidelines pro­
vided in r:!;>page 95.
-Obey a ll traffic laws when driving.
- The r
oute calculated by the navigation sys-
tem is a recommendation fo r reaching your
destination. Obey traffic lights, stopping re­
s trictions, one-way streets, lane change re ­
strictions, etc.
CD Note
-If the driving directions conflict with traffi c
laws, obey
the traffic laws.
- Adjust th e
volume of th e navigation system
so signals from outside the vehicle, such as
police
and fire siren s, can be heard cle arly at
all times.
@ Tips
-Snow and obstru ct ions on the G PS antenna
or interference caused by trees and large
- 1
131

Downloaded from www.Manualslib.com manuals search engine Navigation
buildi ngs can impair satellite reception and
affect the system's ability to determine the
vehicle position. Several deactivated or mal­
function ing satel lites can also interrupt GPS
reception and affect the system's ability to
determi ne the vehicle position.
- Because
street names sometimes change,
the names stored in the MMI may in rare
cases differ from the actual street name.
Entering a destination
Free text search
Applie s to: vehi cles with naviga tion syst em
You can quickly and easily search destinations
using the free
text search and transfer them to
route guidance.
Using the MMI touch control pad, yo u can enter
the data fo r a naviga tion destination in any order
all at once (for example, monument Washing­
ton). Likewise, you can
search for points of inter­
est, contacts, previous destinations or favorites
to navigate to the desired address.
.,.. Press the I NAV/MAPI repeatedly until the Enter
destination
menu is displayed ¢page 131,
fig. 114.
.. Keep turning the control knob to the left unti l
the input field appears.
-Write one or more search terms i n the input
field ©¢ page 131, fig. 114. A list of all re ­
sults found will appear in the Infotainment sys­
tem display.
-
Select and confirm a destination from the re-
sults list.
-
Select and confirm Start route guidan ce .
The route is displayed as an ove rview in the m ap
and the route guidance is already active.
Narrowing the search area
-Se lect: right control button > Country /State
selection .
All countries/states are selected at the factory
for the free text search. Using the Country/State
selection ,
you can deselect the irre leva nt coun­
tries/states to i ncrease th e search speed and nar­
row th e res u
lts list.
132
(D Tips
- The MMI input suggestions depend on the
last navigated destinations.
-
Up to SO entries can be stored in the last
destinations list.
- Additional
information on free text search ­
ing can be found
under¢ page 102.
Loading last destination
Applies to: vehicles with nav igation syst e m
Your Last destinations are automatically stored
and can be directly loaded as a destination
ogoin .
.,.. Press the I NAV/MAPI repeatedly un til the Enter
destination
menu i s displayed ¢ page 131,
fig. 114.
Your last destina tions will be listed directly in the
Ente r destination menu and are marked wit h the
symbol @¢page 131, fig. 114.
- Sele ct and confirm a prev ious destina tion.
-
Select and confirm Start route guidance .
Delete last destinations
-Select and confirm a previous destination from
the list .
-
Select and confirm : right control button >De·
lete .
-Select and confirm Delete this la st destination
or Delete all last destinations .
The selected destination or all last destinations
is/are deleted and are no longer displayed in the
free text search .
Entering an address
Applies to: vehicles with navig ation syste m
.. Press the I NAV/MAPI repeatedly until the Enter
destination
menu i s displayed¢ page 131,
fig. 114.
.. Select: left control button > Ent er address .
-Select and confirm a line (such as Street , House
number
or Country /State ) and enter the de­
sired information.
-Select and confirm Start route guidance .

Downloaded from www.Manualslib.com manuals search engine ..... N
G: CX)
.....
"' U"I ,....,
"' ,....,
.. Select: left control button > Online search. The
search
area last set is shown in the input field.
- Changing the search area: select and confirm
Sear ch area > o search area from the list.
-Sear ching for online destination s in these­
lec ted se arch area: enter a new city/state if
necessary.
Enter the search term, such as res­
taurant. Se lect and confi rm an online destina­
t ion. Select and confirm Sta rt route guidance.
- Searching for online destination s in a specific
category :
select Select category. Select and
confirm a category such as Restaurants .
Find which search areas are available under
9 page 134, Entering a point of interest .
You ca n search for online destina tions using the
voice recogni tion system 9 table on page 107.
@ Tips
- Refer to the notes in the About Audi con­
nect chapte r 9 page 128.
-For additional information, visit
www.audiusa.com/help/audi-co nnect.
Finding destinations from a myAudi
account
Applies to: vehicles with nav igation system and Audi connect
Import destinations from your myAudi account
into the MM!.
Req uirement: you must have a myAudi account
set up at http://my.audiusa .com. You must have
a vehicle
stored in your myAudi accou nt and you
must have a destination stored .
.. Press the I NAV/MAPI repeatedly until the Ent er
de stination
menu is displayed ¢page 131,
fig. 114 .
.. Select: left control button > myAudi contacts .
.. If necessary, enter your myAud i user data or
your myAudi PIN. The contacts stored in myAu­
di are displayed.
- Se l
ect and confirm a contact.
-Select and confirm a private or bu siness desti-
na tion .
- Se l
ect and co nfirm Start route guidance .
Navigation
(D Tips
-You only need to e nter your myAudi user da­
ta one time.
-
You can rece ive your myAudi PIN if yo u have
set up a myAu di account. For more informa ­
tion, go to www.audi.com/myaudi.
-Add itional information can be found on the
Internet at www .a udiusa.com/help/audi­
connect.
Entering a destination using geocoor­
dinates
Applies to: vehicles with navigat ion system
"" Press the I NAV /MAP I repeatedly until the Enter
destination
menu i s disp layed ¢ page 131,
fig. 11 4.
.. Select: left control button > Geo coordinates.
-Select and confirm either Latitude or Longi­
tude .
-Turn the control knob to the left/right to
change the latitude/longitude.
-Press the control knob to confirm your in put.
-
Select and confirm Start route guidance .
Entering a stopover
Applies to: vehicles with navigat ion system
You can enter an additional stopover when route
guidance is active .
Fig. 117 Cu rren t ro u te guida nce with stopover
Requirement: a destination must be entered.
.. Press the I NAV /MAP I repeatedly until the Enter
destination
menu is disp layed ¢ page 131,
rg. 114. ~
135

Downloaded from www.Manualslib.com manuals search engine Media
-Move favorit e: select the desired entry from
the favorites list. Select the right control but­
ton > Move fa vorite. Select and confirm the
desired presets lo cation.
- Deleting a fa vo rite:
select the desired entry
from the favorites list. Select the right control
button > Delete favorite > Delete this favorite
or Delete all favorites.
Additional settings
Options menu
Context-specific functions and settings are avail­
able depending on the selected source.
.. Press the right control button.
Sound settings
See Q page 169.
Input level
Requirement: a mobile device must be connected
to the AUX connection cable* or to a USB adapt­
er*.
The volume
of the mobile device is adapted to
the MMI. Audi recommends adjusting the volume
on
the mobile device to 70o/o of the maximum
volume
output.
Bluetooth settings
See Q page 168.
Connection manager
See Qpage 167.
Additional track information
When the function is switched on~ and a play­
list is open, various information
about the cur­
rent track (such as artist, album, album cover*)
as well as the elapsed playing time and the re­
maining playing time are displayed .
ll The func tion automatically switc hes off when th e sou rce
is ch
anged.
162
Jukebox memory capacity
Information on the Jukebox memory capacity and
the number of stored tracks in the Jukebox is dis­
played.
Change playing position
Turn the control knob to the left or to the right.
Or: move your finger across the MMI touch con­
trol pad from left to right.
Shuffle1>
With the function switched on~' all files in the
playlist are played and shown in random order.
Repeat trackll
When the funct ion is switched on~, the current
track repeats.
Back
to "Now playing"
The options menu is closed. The track being cur­
rently played
appears in the playlist.
Play
similar music*
The track being played is quickly analyzed (such
as artists, genres, mood , beat) and a smart play­
list with similar
tracks is shown.
Play more ...
A
smart playlist is shown based on the track be­
ing played. You can select between a playlist with
more tracks by this artist, from this album or of
this genre.
Gracenote online database*
Requirement : the MMI must be connected to the
Internet.
Depending on ava
ilability, various information
will
Load about the track being currently played
when
this function is switched on~.
Copy to jukebox
See Q page 151 , Adding to the Jukebox.
Favorites
See ~page 161.

Downloaded from www.Manualslib.com manuals search engine System settings
System settings
Setting the date and
time
You can set the clock time manually or using the
CPS.
.,. Select: IMENUI button> Settings > left control
button > MMI settings> Date & time .
Automatic setting
When this function is switched on~, the time
and date are automatically adjusted.
Time
The Time can be set manually. The Automatic
setting
must be switched off to do this.
Date
The Date can be set manually. The Automatic
setting
must be switched off to do this.
Time zone
When selecting the appropriate time zone, a
sampling of countries in this zone will be listed .
Automatic time zone*
When the automatic time zone function is
swi t
ched on, the time will automatically adjust to
the corresponding time zone.
Time format
If you select 24h, the clock will display, for ex­
ample, 13:00. If you select AM/PM, the clock
will display, for
example, 1:00 PM.
Date format
I f you select 00.MM .YYYY, the date will display,
for example, 31.12.2015. If you select MM/DD/
YYYY , the date will display, for example,
12/31/2015. If you select YYYY·MM·DD , the
date display will display, for example,
2015-12-31.
MMI settings
.,. Select: IMENUI button> Settings > left control
button > MMI settings.
166
Language
The display language as well as the language for
Voice guidance* and the voice recognition sys­
tem* can be changed.
The number of languages available depends on
the market .
Units of measurement
The following units can be selected:
-Speed (mph or km/h)
- Distance (miles or kilometers)
-Temperature (°F or 0()
- Fuel consumption (l/lOOkm, mpg (US), mpg
(UK) or km/l)
-Volume (liters, gallons)
Operating tips
When the function is switched on~. your MM!
shows you operating tips for input. The frequency
of how often it displays decreases with time. You
can switch off the operating tips at any time.
Voice recognition*
Command display : the display of possible com­
mands during voice input can be switched on or
off.
Short dialog : prompts in a shorter format can be
switched on
or off.
Speech dialog system volume: you can adjust
the volume of the announcements by turning the
control knob.
Individual speech training (only when the vehi­
cle is
stationary): you can adapt the voice recog­
nition
system to your voice or pronunciation in
order to imp rove the system's ability to recognize
your speech. Individual training is comprised of
20 speech entries that consist of commands and
sequences of numbers. You can delete the pro­
grammed voice training with the Reset individu­
al speech training function .
Factory default settings
The following functions can be reset to the facto­
ry default settings:
-Sound settings ~

Downloaded from www.Manualslib.com manuals search engine System settings
-
Lis t of devices already co nn ected : select your
cell phone from the list of all the cell phones
that are already connected.
Additional options
Depending on the selected function, you can use
the right control button to access the available
additional options in the connection manager.
Bluetooth settings
-Bluetooth : when the function is switched on
~, the Bluetooth symbol appears in the Info­
tainment system display. The MMI visibility for
Bluetooth devices can be turned on or off using
the Visible /Invi sible settings. Howeve r, it is
still possible to establish a Bluetooth connec­
tion w ith pa ired devices when the visibility is
switched off. Bluetooth shoul d be switched t o
Invisible when the pairing process is complete
so that the MMI is not visible to others. Blue­
tooth can be switched off. Then a Bluetooth
connection is not possible.
-Delete Bluetooth device: the selected cell
phone/mobile device is disconnected from the
MMI.
-Show Bluetooth profi les: you can individually
Connect or Dis connect the H andsfree , Car
phone and Directory/contacts profiles.
- Bluetooth audio player : switch this function on
~to select the Bluetooth audio player as a
source in the Media menu.
-Bluetooth name: the MMI Bluetooth name (for
example ,,AUDI MMI 2613") is displayed and
can be changed.
Online settings*
-Data connection settings: see~ page 127,
Configuring
the data connection
- Data usage coun ter : the amount of data pack­
ets that are sent and received through the MMI
is displayed. You can reset the data usage infor­
mation to zero using the Reset data cou nter
option.
-Netwo rk status: the mobile network provider
for data service as well as the network status
are displayed.
168
Wi-Fi settings*
See ~page 126, Wi-Fi Hotspot.
SIM PIN settings*
-Automatic PIN en try : when this function is
switched on~, the SIM PIN is automatically
saved in the MMI after it is entered for the first
time. The SIM PIN for four different SIM cards
can be saved in the MMI. With the function
switched off, the currently stored SIM PIN is
deleted from the MMI. When the automatic
PIN entry is switched on, there are no SIM PIN
prompts.
- Disable PIN query : when switched on, there are
no SIM PIN queries. The automatic PIN entry is
not used in this case.
-Change PIN: you can change the PIN on your
SIM card. First enter the current SIM PIN. The
SIM PIN can only contain digits 0-9. The new
SIM PIN must be entered twice for security and
then it will be saved to the SIM card.
Network settings*
- Logi
n: you can chose an autom atic login to
your cell phone service provider's network, or
you can choose a manual login from the list of
available networks.
-Netwo rk selection : available networks in the
present location can be selected under network
selection. This function is only available for the
manual login setting.
(D Tips
Some SIM cards do not allow the SIM PIN
queries to be switched off.
System update
"'Select: IMENUI button> Settings> left control
button > Sy ste m ma intenance .
-
System update : slide the storage device with
the update data into the appropriate drive
¢page 150. Select and confirm the drive>
Start update . The duration of the process de­
pends on the size of the update.