2016 AUDI A3 oil type

,....,
N
0 > co ,...., -If you are unable to determine whether or
not a particular fuel blend meets the speci­
ficat ions, ask your service station or its fuel
supplier.
- Do not use fuel for which the contents can­
not be identified.
- Fuel system damage and performance prob­
lems resulting from the use of fue ls diffe r­
ent from those specified are not the respon­
s ibility of Audi and are not covered under
the New Veh icle or the Emiss ion Control
System Warrant ies .
- If you experience a loss of fue l economy or
driveability and pe rformance prob lems due
to the use of one of these fuel blends, we r ecommend that you switch to unblended
fuel.
Gasoline additives
A ma jor concern among many auto manufactur­
ers is carbon deposit build-up ca used by the type
of gasoline yo u use.
A lthough gasoline gr ades d iffer from one manu ­
facturer to another, they have cer tain things in
common . A ll gasoline grades contain substances
that can cause deposits to collect on vita l engine
parts, such as fue l injectors and intake valves. Al­
though most gasoline brands include additives to
keep engine and fuel systems clean, they are not
equally effective .
Aud i recommends using TOP TIER Detergent Gas­
oline. For more informat ion on TOP TIER Dete r­
gent Gasoline, please go to the official website (www.toptiergas .com) .
After an extended period of using inadequate
fuels, carbon deposit build-ups can rob your en­
g ine of peak performance.
(D Note
Damage o r malfunction due to poo r fuel q ual­
ity is not covered by the Aud i New Vehicle
Limited Warranty.
Ch eck ing and Filling
Diesel fuel
Applies to vehicles: wi th diesel engine
Always use U LSD (Ultra Low Sul fur Diesel) No. 2 .
The ULSD No . 2 meets the ASTM D97S.
D iesel f ue l w it h con cen tratio ns of b iod iesel h igh­
er than 5% such as B11, B2 0 or B100 are strictly
prohib ited .
Se rvice station fuel pumps are labe led with the
correct f uel info rmation for easy recog nition by
the user. If the d iesel f uel pump is no t labeled
ask the station operator wha t fu el is being dis ­
pensed before filling up your vehicle .
UL SD No. 2 m ay not be available outside the USA
and Can ada . Be s ure to che ck before traveling to
other countries .
UL SD No . 2 can become thic ke r i n ve ry co ld tem­
peratures, and th is can imp air the engine's s tart ­
ing and running. Depend ing on the season, gas
stations provide ULS D No . 2 that flows be tter in
cold temperatures so that you can continue oper­
at ing your vehicle as usual.
(D Note
- Your vehicle's diese l engine was designed
soley for use w ith ULSD No . 2 . Therefo re,
neve r use gasoline, heating oil, other fuels
or flow imp rovers. These contain substances
that will severely damage the fuel system and the engine . Such damage will not be
covered by yo ur New Vehicle Limi ted War­
ranty .
- If you put a ny amo unt of incorrect fuel in
the fuel tank, do not sta rt the eng ine under
any circumstances. Immed iately contact the
nea res t author ized A udi dealer or author­
ize d Aud i Serv ice Facili ty fo r ass ist ance.
T hese f uels conta in su bstances tha t can se­
verely damage the fuel system an d the en­
gine if the engine is started.
- If the diese l fuel quality is poo r, it may be
necessary to have the wate r drained from
the water sepa rato r in the
fuel filter more
often t han spec ified in the maintenance
schedule. This can help reduce engine mal­
functions <=>
page 24.
229

Checking and Filling
-To reduce the risk of burns from hot engine
oil, let the engine cool down to the touch.
- When removing the oil drain plug with your
fingers, stay as far away as possible. Always
keep your forearm parallel to the ground to
help prevent hot oil from running down your
arm.
- Drain the oil into a container designed for
this purpose, one large enough to hold at least the total amount of oil in your engine .
- Engine oil is poisonous. Keep it well out of
the reach of children .
- Continuous contact with used engine oil is
harmful to your skin. Always protect your
skin by washing oil off thoroughly with soap
and water .
CD Note
Never mix oil additives with your engine oil.
These additives can damage your engine and
adversely affect your Audi Limited New Vehi­
cle Warranty.
@ For the sake of the environment
-Before changing your oil, first make sure
you know where you can properly dispose of
the used oil.
- Always dispose of used engine oil properly.
Do not dump it on garden soil, wooded
areas, into open streams or down sewage
drains.
- Recycle used engine oil by taking it to a used
engine oil collection facility in your area, or
contact a service station.
Cooling system
Coolant
The engine coolant performs two functions: it
keeps the engine from overheating and it pro­ tects the engine from freezing in the winter.
The cooling system is sealed and generally re­
quires little attention.
The cooling system has been filled at the factory
with a permanent coolant which does not need to
be changed. The coolant consists of a mixture of
244
specially conditioned water and the manufactur­
er's glycol-based coolant additive Gl3 antifreeze
with anticorrosion additives (50% for USA mod­ els; 60% for Canadian models). This mixture
both assures the necessary frost protection and
protects metal components in the engine's cool­
ing system from corrosion and scaling. It also
raises the boiling point of the coolant.
Do not reduce the concentration of the coolant in
the summer by adding plain water.
The propor­
tion of coolant additive must be at least 50%
but not more than 60%
to maintain antifreeze
protection and cooling efficiency. If the coolant
frost protection is too low, the coolant could
freeze and damage the vehicle heating and en­
gine cooling system.
For year-round driving, antifreeze is added at the
factory for temperatures down to:
--31°F(-35°C)USA
- - 40 °F ( - 40 °C) Canada.
If you must add coolant, use a mixture of water
and coolant additive. Mixing the coolant additive
with distilled water is recommended.
A WARNING
Before you check anything in the engine com­
partment, always read and heed all WARN­
INGS
~ page 236.
CD Note
- Before winter sets in, have the coolant
checked to see if the coolant additive in your
vehicle is sufficient to meet the climate con­ ditions. This is especially important if you
live in a region where the winter is extreme­
ly cold.
If necessary, increase the proportion
of coolant additive to 60%.
- When adding coolant additive to your cool­
ing system, remember:
- We recommend using only coolant addi­
tive Gl2++ or G13 (check the label) for
your vehicle. This coolant additive is avail­
able at authorized Audi dealers. Other
types of antifreeze can significantly re­
duce corrosion protection. The resulting

.... N
0 > CX)
.... I.Cl U"I
.... I.Cl ....
corrosion can cause a loss of coolant and
serious engine damage .
- Do not add any type of radiator leak sealant
to your vehicle's engine coolant . Adding ra­
diator repair fluid may adversely affect the
function and performance of your cooling
system and could result in damage not cov­
ered by your New Vehicle Limited Warranty.
Adding coolant
F ig . 198 Engine compa rtment: mark in gs on t he coo lant
expa nsion tank
Read and follow the WARNINGS before check­
ing anything in the engine compartment
¢ page 236, Working in the engine compart­
ment.
Checking the engine coolant level
• Park your vehicle on a level surface .
• Switch the ignition off .
• Read the coolant level on the coolant expansion
tank
¢ fig. 198 . The coolant level must be be­
tween the markings when the engine in cold .
When the engine is warm it can be slightly above the upper marking.
Adding coolant
Plug-in hybrid drive*: your vehicle has two cool­
ant expansion tanks that are separate from each
other. The smaller of the two expansion tanks
must not be opened
¢ page 108. Read and fol­
low the important safety precautions ¢
A in
Coolant on page 109.
Requirement: there must be a residual amount of
coolant in the expansion tank ¢(D .
• Let the engine cool down .
Checking and Filling
• Place a cloth over the coolant expansion tank
cap and unscrew the cap counterclockwise
¢ A .
• Add coolant mixed in the correct ratio
¢
page 244 up to the upper marking.
• Make sure that the fluid level remains stable.
Add more coolant if necessary.
• Close the cap securely .
A coolant loss suggests a leak. Immediately drive
your vehicle to an authorized Audi dealer or au ­
thorized Audi Service Facility and have the cool­
i ng system inspected. If the cooling system is not
leak ing, a loss can come from the coolant boiling
through overheat ing and being pushed out of the
cooling system .
,&_ WARNING
-= -The cooling system is pressurized and can be­
come very hot. To reduce the risk of burns
from hot coolant:
- Do not open the coolant expansion tank cap
with the engine hot. There is a risk of burns.
- Stop the engine and allow it to cool.
- Protect your face, hands and arms from es-
caping coolant and steam by covering the
coo lant tank cap with a large, thick cloth.
- Turn the coolant tank cap counterclockwise
slowly and keep light pressure on the cap.
- To reduce the risk of burns, do not allow any
antifreeze or coolant to drip onto the ex ­
haust system or hot engine components.
The ethylene glycol in engine coo lant can
catch fire under certain circumstances .
- The coolant additive and the coolant can be
dangerous to your health . For th is reason,
keep the coolant in the original container
away from children. There is a risk of poi­
soning .
- When working in the engine compartment,
remember that the radiator fan can switch
on even if the ignition is switched off, wh ich
increases the risk of persona l injury.
(J) Note
Do not add coolant if the expansion tank is
empty . Air could enter the cooling system and
damage the eng ine.
If this is the case, do not ..,_
245

Technical data
Vehicle identification
F ig . 237 Vehi cle Ide ntif icatio n Number (VlN) plate : loca·
t ion on dr iver 's side dash pane l
XXXXX XX -X -XXXX XXX XX
CD+ ~t :1:: xxxxxxxx xx x xxxxxxxx
T VP /fffl XXX XXX
XX XXXXXXX XX X X XX
XXX
K W XXX
®i ~:J ·f lfils~~ XXXX XXX XXX
®-+ ~N:a=i~l xxxx ; xxxx xxx ; xx
II.· AUSS, I OPTIONS
E0A
7D5 4UB 6XM 5SG 5RW
2EH J0Z lLB l
A S lBA
3FC SMU 7Xl
F0A 9G3 0G7 0YH 0JF
TL6 3KA 8EH UlA X98 QZ7
lXW 803 908 824 020
7T6 CV7 7K0 4X3 2K2
3L4
4KC 3Y0 413 502
lSA 7GB 01A 4G0
XX. X XX X XX X xxxx
Fig. 238 Th e ve hicle iden tifica tion label- inside the lug­
gage co mpartment
Veh icle Identification Number (VlN )
The Vehicle Identific ation N umbe r is lo cate d in
d if f eren t places:
- u nder the w indshield on the dr iver's side
c:> fig. 23 7.
- in the M MI: Select: the I MENU I button >Car >
Sy stems *
control b utton > Service & control >
;::: VIN number .
~ -on the vehicle identification label. CX)
rl I.Cl U"I
rl I.Cl rl
Technical data
Vehicle identification label
T he vehicle identi fica tion label is lo cate d in t he
l uggage compa rtment in the sp are whee l we ll.
T he lab el
c:> fig. 238 shows the fo llow ing vehicle
da ta:
(D Vehicle Identification Number (VIN)
@ Vehicle type, eng ine output, transm ission
@ Engine and transmission code
@ Paint numbe r and in terior
® Optional equipment numbers
T he inf ormation of the veh icle identification label
can al so be fo und in your W arranty
& M ainte ­
nance booklet.
Safety compliance sticker
The safety co mpliance sticker is yo ur ass ura nce
t h at your new vehi cle complies w ith all appli cable
Fede ral Motor Vehicle Safety Stand ards which
we re in effe ct at t he tim e the veh icle w as manu ­
fac tured. Yo u ca n fi nd this sticker on the door
jamb on the driver 's side. It shows the month and
year of production and t he ve hicle identification
number of your vehicle (perforation) as well as
t h e Gross Vehicle Weight Rat ing (GVWR) and the
G ross Axle We ight Rati ng (GAWR).
H igh- voltage warning label
T he high-voltage wa rnin g labe l is located in the
engine compartment next to the engine hood re­
lease. The spark ignition system complies with
t h e Canadian standard ICES-002.
Weights
Gross Vehicle Weight Rating
The Gross Vehicle We ight Rating (GVWR), and
t h e Gross Axle Weight Rating (GAWR) for front
and rear a re listed on a sticker on the door jamb
o n the driver 's side .
The Gross Vehicle Weight Rating includes the
weight o f the basic vehicle plus f ull fuel tank, oil
and coolant, p lus maxim um load, which includes
passenger weight (150 lbs/68 kg per des ignated
seat ing pos it ion) and luggage weight
c:> .&, . .,.
301

Tech nical data
Gasoline engines
A3 Sportback e-tron 1.4, 4 cylinder
Maximum output SAE net hp@ rpm 150@ 5000 -6000 l/min2>
Max
imum torq ue SAE net lb-ft@ rpm 184@ 1600 - 3500 l/min2>
Displacement
CID (cm3
) 85 (1395)
Engine oil with filter change
1>
Fuel ¢ page 228, Gasoline fuel
Electric output (short-term)
hp
E lectr ic torque (short-te rm) lb-ft
Total output (short-term) hp
T otal torque (short-term) lb-ft
Battery type
Battery energy content kWh
1> For specific engine oil capacities, please see
the most cur rent informa tion fo r th e USA at
http :/ /www.aud iusa.com/he lp/ma intenance o r
for Canad a at http ://www. aud i.c a/ca/ brand/ en/
A3 Sedan l.8L, 4-cylinder
Maximum output SA E net hp@rpm
Maximum torq ue SAE net lb-ft@ rpm
Displa cement C
ID (cm
3
)
Engine oil with filter change1>
102 (75 kW) (107 (80kW) max. nomina l
power) 2
l
243 2
)
204 (150 kW)2l
2582
)
Lithium-ion 8.8 kWh 2
l
you r _ aud i/aud i_ services_ and/Care _a nd_Ma i nte­
nance/schedule. html or call 800-822-2834.
2)
1 70 @ 4500 - 6200
200@ 1600 - 4400 110 (1798)
Fuel
¢ page 228, Gasoline fuel
l ) For specific engine oil capac it ies , please see
the mos t cur rent informa tion fo r the USA at
http :/ /www. audi usa.com/he lp/ma inten ance o r
A3 Sedan 2.0L, 4-cylinder
Maximum output SA E net hp@ rpm
Maximum torque SAE net lb-ft@ rpm
Displa cement C
ID (cm
3
)
Engine oil with f ilter changell fo
r Canada at http://www.audi.ca/ca/brand/ en/
yo ur _a ud i/aud i_services_and/Care_a nd_Ma i nte­
nance/sched ule. h tml or c all 8 00-822- 2834.
220 @ 4500 - 6200
258@ 1600 -4400
12 1 (1984)
Fuel
¢ page 228 , Gasoline fuel
l) For specific engine oil capac ities, please see
the most cur rent informa tion fo r th e USA at
http://www.au diusa.com/he lp/ma inten ance o r
for C anada at h ttp://www.au di.ca /ca/br and/ en/
304
you r _ a ud i/aud i_ services_ and/Care _and _Ma i nte­
nance/schedule. html or call 800-822-283 4.