2016 AUDI A3 CABRIOLET wheel

Airbag syste m
-If, in exce ptional circumstances, you must
install a forward-faci ng chi ld restraint on
t h e front passenger seat, always m ove the
seat into its rearmost pos ition in the s eat's
f ore an d aft adjustm ent ra nge, as far away
from th e airbag as pos sibl e. Th e backrest
mus t be adjusted to an up right posit ion.
Make s ure that the
PAS SENGER AIR BAG
OFF
light comes on and stays on all the time
whenever the ignition is switched on.
.&_ WARNING
- If the PASSENGER AIR BAG OFF light does
not go out when an ad ult is sitting on the
front passenger seat after taking the steps
described above, make sure the adu lt is
properly seated and restrained at one of the
rear seat ing positions .
- Have the airbag system inspected by your
Audi dealer before transporting anyone on
the front passenger seat .
(D Tips
If the capacitive passenger detection system
determines that the front passenger seat is
empty, the frontal airbag on the passenger
side will be turned off, and the
PASSENGER
AIR BAG OFF
l ight will stay on.
Repair , care and disposal of the airbags
Pa rts of t he a irbag system are installed at many
d ifferent places on your Aud i. Insta lling, remov ­
ing, servic ing o r repa iring a part in an area of the
veh icle can damage a part of an airbag system
and p revent that system from working properly
in a co llision .
There are some important things you have to
know to make sure that the effectiveness of the
system wi ll not be impaired and that discarded
components do not cause injury or poll ute the
env ironment.
.&_ WARNING
Improper care, serv icing and repair proce­
dures can increase the r isk of personal injury
and death by preventing an airbag from de-
158
-
p loying when needed or deploy ing an a irbag
unexpectedly:
- Never cover, obstruct, or change the steer­
ing wheel horn pad or airbag cover or the in­
strument panel or modify them in any way.
- Never attach any objects s uch as c up ho lders
or telephone mountings to the surfaces cov­
ering the a irbag un its .
- For cleaning the horn pad or instrument
panel, use only a soft, dry cloth or one mois­
tened w ith plain water. Solvents or cleaners
could damage the airbag cover or change
the st iffness o r streng th of the material so
that the airbag cannot deploy and p rotect
prope rly.
- Never repair, ad just, or change any parts of
the airbag system.
- All work on the steering wheel, inst rument
panel, front seats or e lectr ica l system ( in­
cluding the installation of a udio eq uipment,
cellular tele phones and C B radios, etc.)
m ust be perfo rmed by a qu alified techn ician
who has the training and specia l equipment
necessary.
- For any work on the airbag system, we
strong ly recommend that you see your au­
thorized A udi dealer or qualified wo rkshop.
- Never modify the front b umper or parts of
the vehicle body.
- Always make sure that the side a irbag can
inflate w ithout interference:
- Never install seat covers or replacement
upholstery ove r the front seatbacks that
have not been specifically approved by
A udi .
- Never use addi tional seat c ushions that
cover the areas where the side airbags in­
flate .
- Damage to the orig inal seat cove rs or to
the seam in the area of the s ide airbag
module mus t always be repaired immedi­
ate ly by an autho riz e d Au di dealer .
- The a irbag sys tem can deploy only once. Af­
ter an airbag has been deployed, i t m ust be
replaced with new replacement parts de­
signed and approved espec ia lly for your
Aud i model version . Replacement of com­
plete airbag systems or airbag components

<( co ..... N
" N ..... 0 r--. > 00
Although they are not a soft pillow, they can
"cushion" the impact and in this way they can
help to reduce the risk of injury to the lower ex­
tremities .
All of this takes place in the blink of an eye, so
fast that many people don't even realize that the
airbags have deployed . The airbags also inflate
wi th a great deal of force and it is important for
occupant safety that nothing should be in their
way when they deploy .
Fully inflated airbags in comb ination with proper­
ly worn safety belts slow down and limit the o c­
cupant 's forward movement and help to reduce
the r isk of injury .
Important safety instructions on the knee
airbag system
Applies to: veh icles wit h knee airbags
Airbags are only supplemental restraints . Always
wear safety belts correctly and ride in a proper
seating position.
There is a lot that you and your passengers must
know and do to help the safety belts and airbags
to p rovide supplemental protection .
& WARNING
An inflating knee airbag can cause ser ious in­
jury. Wearing safety bel ts incorrec tly and im­
proper sea ting positions increase the r isk o f
serious personal injury and death whenever a
vehicle is being used.
- The knee airbag system cannot protect you
properly if you are seated too close to any of
the airbag locat ions. When adj usting their
seat positions, it is important that both the
driver and the front passenger keep their
upper bod ies a nd knees at the following
min imum safe distances :
- at least 10 inches (25 cm) between the
chest and the steering wheel/instrument
panel.
- at least 4 inc hes (10 cm) between the
knees and the lower part of the instru­
ment panel.
- The risk of persona l injury inc reases if you
lean forward or to the side, or if the seat is
-
Airb ag sys tem
improperly positioned and you are not wear­
ing your safety belt. The risk increases even
more should the airbag deploy.
- Always make sure that the knee a irbag can
inflate w ithout interference . Objects be­
tween you and the airbag can increase the risk of injury in an acc ident by interfering
with the way the airbag deploys or by being
pushed into yo u as the a irbag deploys.
- Never let anybody, especia lly children or
anima ls ride in the footwell in front of the
passenger seat. If the airbag deploys, this
can result in serious or fatal inj uries.
- Never carry objects of any kind in the foot­
well area in front of the driver's or pas­
senger's seat. Bulky objects (shopp ing
bags, fo r example) can interfere with or
prevent proper dep loyment of the airbag .
Small objects ca n be thrown th rough the
vehicle if the airbag deploys and injure you
o r your passengers .
- M ake sure the re are no c rac ks, deep scratch­
es or othe r damage in the area of the inst ru­
men t panel where the knee airbags are lo­
cated.
- If children are incorrec tly se ated, their risk
of injury inc reases in a coll is io n
¢ page 165, Child safety.
Side airbags
Description of side airbags
The airbag system can provide supplemental
pro tec tion to properly restrained occupan ts .
Fig . 14 3 Side a irbag locatio n in t he drive r's seat
The side airbags a re located in the s ides of the
front sea t backrests ¢
fig. 143.
161

<( co .... N r--­N .... 0 r--­> co
rear seating position and have the airbag
system inspected by your authorized Audi
dealer.
- Always buckle the child seat firmly in
place even if a child is not sitting in it. A
loose child seat can fly around during a
sudden stop or in a collision.
- Always read and heed all WARNINGS
whenever using a child restraint in a vehi­
cle
c!;> page 135, Safety belts, c!;> page 143,
Airbag system
and c!;> page 165, Impor­
tant information.
{D) Tips
Always replace child restraints that were in­
stalled in a vehicle dur ing a crash. Damage to
a child restraint that is not visible could cause
it to fail in another collision situation.
Advanced front airbag system and children
Your vehicle is equipped with a front "Advanced
Ai rbag System" in compliance with United States
F edera l Motor Vehicle Safety Standard ( FMVSS)
208, as well as Canada Motor Vehicle Safety
Standard (CMVSS) 208 as applicable at the time
your veh icle was manufactured.
The Advanced Airbag system in your vehicle has
been certified to meet the "low-risk" require­
ments for 3- and 6-year old children on the pas­
senger side and small adults on the driver side.
The low risk deployment criteria are intended to
reduce the risk of injury through interaction with
the airbag that can occur, for example, by being
too close to the steering wheel and instrument
panel when the airbag inflates. In addition, the
sys tem has been certified to comply with the
"suppression" requirements of the Safety Stand ­
ard, to turn off the front airbag for infants up to 12 months who are restrained on the front pas­
senger seat in child restraints that are listed in
the Standard.
Even though your vehicle is equipped with an Ad­
vanced Airbag system, all children, especially those 12 years and younger, should always r ide
in the back seat properly restrained for their age
and size . The airbag on the passenger side makes
Child safety
the front seat a potentia lly dangerous p lace for a
child to ride. The front seat is not the safest place
for a ch ild in a forward-facing child safety seat . It
can be a very dangerous place for an infant or a
larger ch ild in a rearward-facing seat.
The vehicle's Advanced Airbag System has a ca­
pacit ive passenger detection system in the front
passenger seat cushion that can detect the pres­
ence of a baby or a child in a child restraint sys­
tem on this seat.
The capacitive passenger detection system regis­
ters the changes that result in an electrical field
when a child, a child restraint, and a baby blanket are on the front passenger seat . The change in
the measured capacitance due to the presence of
a chi ld, a child restraint, and a baby blanket on
the front passenger seat is related to the child
restraint system resting on the seat. The meas­
ur ed capacitance of a child restra int system var­
ies depending on the type of system and specific
make and mode l.
T he elect rical capacitance of the various types,
makes, and models of child restraints specif ied
by the U.S .National Highway Traffic Safety Ad­
ministration (NHTSA) in the relevant safety
standard are stored in the Advanced Airbag Sys­
tem control unit together with the capacitances
typ ical of infants and a 1-year old child. When a
child restraint is used on the front passenger
seat w it h a typical 1 year-old infant, the Ad­
vanced Airbag System compares the capacitance
measured by the capacitive passenge r detection
system with the data stored in the electronic con­
trol unit.
Child restraints and Advanced front airbag
system
Regardless of the ch ild restraint that you use,
make sure that it has been certified to meet Safe­
ty Standards and has been cert ified by its manu ­
facturer for use w ith an airbag . Always be sure
that the child restraint is properly installed at
one of the rear seating positions. If in exception­
al circumstances you must use it on the front
passenger seat, carefully read all of the informa-
tion on child safety and Advanced Airbags and .,.
167

Tires and wheels
Tires and wheels
Wheels
General information
~check your tires regularly for
damage (punctures, cuts, cracks
and bulges). Remove foreign ob­
jects from the tire tread.
~ If driving over curbs or similar
obstacles, drive slowly and ap ­
proach the curb at an angle.
~ Have faulty tires or rims re­
placed immediately.
~ Protect your tires from oil,
grease and fuel.
~ Mark tires before removing
them so that the same running direction can be maintained if
they are reinstalled .
~ Lay tires flat when storing and
store them in a cool, dry location
with as little exposure to light as possible.
(i}) Note
-Please note that summer and winter tires are designed for
the conditions that are typical i n those seasons. Audi recom­
mends using winter tires dur­
i ng the winter months. Low
temperatures significantly de­ crease the elasticity of summ­
er tires, which affects traction
204
and braking ability. If summer
tires are used in very cold
temperatures, cracks can form on the tread bars, resulting in
permanent tire damage that
can cause loud driving noise
and unbalanced tires.
-Burnished, polished or chromed rims must not be used in winter driving condi­
tions. The surface of the r ims
does not have sufficient corro­
sion protection for th is and
could be permanently dam­
aged by road salt or similar
substances.
Tire designations
Fig. 168 Tire specifi cation codes on the
sidewall of a tire .,._

<( co .... N ,.__
N .... 0 ,.__
> co
(D Tires for passenger vehicles
(if applicable)
P indicates a tire for a passenger
vehicle. T indicates a tire desig­
nated for temporary use.
@ Nominal width
Nominal width of the tire be­
tween the sidewalls in millime­
ters. In general: the larger the number, the wider the tire.
@ Aspect ratio
Height/width ratio expressed as a
percentage.
@ Tire construction
R indicates a radial tire.
® Rim diameter
Size of the rim diameter in inches.
@ Load index and speed rating
The load index indicates the tire's load-carrying capacity.
The speed rating indicates the maximum permitted speed¢.&
in
Winter tires on page 219.
"EXTRA LOAD", "xl" or "RF" indi­
cates that the tire is reinforced or
is an Extra Load tire.
Speed rat- Maximum permitted speed
ing
p
up to 93 mph (150 km/h)
Q up to 99 mph (160 km/h)
Tires and wheels
Speed rat- Maximum permitted speed
ing
R up to 1 06 m ph (170 km/h)
s up to 110 mph (180 km/h)
T up to 118 mph (190 km/h)
u up to 124 mph (200 km/h)
H up to 130 mph (210 km /h)
V up to 149 mph (240 km/h)al
z above 149 mph (240 km/h)al
w up to 168 mph (270 km/h)al
y up to 186 mph (300 km/h)al
a ) Tire manufacturers sometimes use "ZR"
for tires with a maximum speed above
149 mph (240 km/h).
(j) US DOT number (TIN) and
manufacture date
The manufacture date is listed on
the tire sidewall (it may only ap­
pear on the inner side of the tire):
DOT ... 2215 ...
means, for example, that the tire
was produced in the 22nd week of
the year 2015.
@ Audi Original equipment
tires
Audi Original equipment tires
with the designation "AO" or "RO"
have been specially matched to
your Audi. When used correctly,
these tires meet the highest standards of safety and handling.
An authorized Audi dealer or au­
thorized Audi Service Facility will ""
205

Tires and wheels
be happy to provide more infor­
mation .
® Mud and snow capability
"M/S" or "M+S" indicates the tire
is suitable for driving on mud and
snow.
& indicates a winter tire.
@ Compos ition of the tire cord
and materials
The number of plies indicates the
number of rubberized fabric lay­
ers in the tire . In general: the
more layers, the more weight a
tire can carry. Tire manufacturers
must also specify the materia ls
used in the tire. These include
steel , nylon, polyester and other
materials.
@ Ma ximum permitted load
T his number indicates the maxi­
mum load in kilograms and
pounds that the tire can carry.
@ Uniform tire quality grade
standards for treadwear,
traction and temperature resistance
Tread wear, t raction and temper­
ature ranges
¢page 221 .
@ Running direction
The arrows indicate the running
direction of unidirectional t ires.
You must always follow the speci -
206
fied running direction
¢page 238 .
(8) Maximum permitted
inflation pressure
This number indicates the maxi­
mum pressure to which a t ire can
be inflated under normal operat­
ing condit ions.
Glossary of tire and loading
terminology
Accessory we ight
means the combined weigh t (in
excess of those standard items
which may be replaced) of auto­ matic transmission, power steer­
ing, power brakes, power win­
dows, power seats , radio, and
heater, to the extent that these
items are available as factory -in ­
stalled equipment (whether in­
stalled or not).
Aspect ratio
means the rat io of the height to
the width of the tire in pe rcent.
Numbers of 55 or lower indicate a
low s idewall for imp roved steer­
ing response and better overa ll
handling on dry pavement.

Bead
means the part of the tire that is
made of steel wires, wrapped or
reinforced by ply cords and that is
shaped to fit the rim.
Bead separation
means a breakdown of the bond
between components in the bead.
Cord
means the strands forming the
plies in the tire.
Cold tire inflation pressure
means the tire pressure recom­
mended by the vehicle manufac­
turer for a tire of a designated size that has not been driven for
more than a couple of miles (kilo­
meters) at low speeds in the
three hour period before the tire pressure is measured or adjusted .
Curb weight
means the weight of a motor ve­
hicle with standard equipment in­
c luding the maximum capacity of
fuel, oi l, and coolant, air condi­
tioning and add itional weight of
optional equipment.
E xtra load ti re
<( a:,
~ means a tire designed to operate
N
~ at higher loads and at higher in ­
s: a:,
Tires and wheels
flation pressures than the corre­
sponding standard tire . Extra load
tires may be identified as "XL",
" xl", "EXTRA LOAD", or "RF" on
the sidewall.
Gross Axle Weight Rating ( " GAWR")
means the load -carrying capacity
of a single axle system, measured
at the tire-ground interfaces .
Gross Vehicle Weight Rating
("GVWR ")
means the max imum total loaded
weight of the vehicle.
Groove
means the space between two ad­
jacent tread ribs .
Load rating (code)
means the maximum load tha t a
tire is rated to carry for a given in­
flat ion pressure . You may not find
this informat ion on all tires be­
cause it is not requ ired by law.
Maximum load rating
means the load rating for a tire at
the maximum permissible infla­
tion pressure for that tire.
Maximum loaded vehicle
weight
means the sum of:
2 0 7
..

Tires and wheels
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight, and
(d) Production options weight
Ma ximum (permissible )
inflation pressur e
means the maximum cold infla­
tion pressure to which a tire may be inflated. Also called "maxi­
mum inflation pressure ."
Normal occupant weight
means 150 lbs . (68 kilograms)
times the number of occupants
seated in the vehicle up to the to­
ta l seating capacity of your vehi­
c le .
Occupant d istribution
means distribution of occupants
in a vehic le .
Outer diameter
means the overall diameter of an
inflated new tire.
Overall width
means the l inear distance be ­
tween the exteriors of the side­
walls of an inflated tire , including
elevations due to labeling , deco ­
rations, or protective bands or
ribs .
208
Ply
means a layer of rubber -coated
parallel cords.
Production options weight
means the comb ined weight of
those installed regular production
options weighing over 5 lbs . (2 .3
kg) in excess of those standard
items which they replace, not pre­
vio usly considered in c urb weight
or accessory weight, inc luding
heavy duty brakes, ride levelers,
roof rack, heavy duty ba ttery, and
special trim.
Radial ply tire
means a pneumatic tire in which
the ply cords that extend to the beads are laid at subs tantially 90
degrees to the centerline of the
tread .
Recommended inflation
pressure
see~ page 207, Cold tire infla­
tion pressure.
Reinforced tire
means a tire designe d to operate
at higher loads and at higher in­
flat ion pressures than the corre­
spond ing standard tire . Rein­
forced tires may be identified as .,.