2016 Abarth 500 gas type

TYPES OF BULBS
Various types of bulbs are fitted to your car:
All-glass bulbs:(type A) press-fitted. Pull to remove.
Bayonet type bulbs:(type B) to remove them press the bulb
and turn it anticlockwise.
Tubular bulbs:(type C) release them from their contacts to
remove.
Halogen bulbs:(type D) to remove the bulb, release the clip
holding the bulb in place.
Halogen bulbs:(type E) to remove the bulb, release the clip
holding the bulb in place.
Gas discharge bulbs (Xenon):(type F) to replace them,
contact an Abarth Dealership.
136
IN AN EMERGENCY

Bulbs
Use Type Power Ref. Figure
Main beam headlights HI 55 W D
Dipped headlights H7 55 W D
Dipped headlights with gas discharge bulbs
(Xenon) (for versions/markets, where provided)DIS 35 W F
Front side lights/daytime running lights W2I/5W 5/2IW A
Front direction indicators WY2IW 21 W B
Front direction indicators (with xenon gas
discharge bulbs)PY24W 24 W B
Side direction indicators W5W 5 W A
Rear direction indicators PY2IW 2IW B
Rear side lights RI0W I0W B
Brake lights P2IW 2IW B
Reversing light P2IW 2IW B
Rear fog light P2IW 2IW B
Roof light C5W 5 W C
Luggage compartment light W5W 5 W A
Number plate light C5W 5 W C
Fog lights HI 55 W E
Third brake lights W5W 5 W A
137

NUMBER PLATE LIGHTS
To replace the bulbs proceed as
follows:
❒apply pressure to the point shown by
the arrow fig. 115 and remove the
lens;
❒change the bulb, releasing it from the
side contacts;
❒fit the new bulb and make sure that it
is correctly clamped between the
contacts;
❒then refit the lens.
WARNING
116) Due to the high power supply
voltage, gas discharge bulbs
(Xenon) should only be replaced
by specialised personnel: danger
of death! Contact an Abarth
Dealership.
REPLACING AN
INTERIOR BULB
For the type of bulb and power rating,
see paragraph "Replacing a bulb".
INTERIOR ROOF LIGHT
To replace the bulb, proceed as follows:
❒using the screwdriver provided,
extract the roof light A fig. 116
working in the point shown by the
arrow;
115AB0A0099
116AB0A0100
142
IN AN EMERGENCY

Thousands of miles 9 18 27 36 45 54 63 72 81 90
Thousands of kilometres 15 30 45 60 75 90 105 120 135 150
Years12345678910
Check operation of the wiper/washer system and adjust
jets, if necessary●●●●●
Check cleanliness of bonnet and luggage compartment
locks, as well as cleanliness and lubrication of linkages●●●●●
Check soft top operation while closing and opening; check
sealing gaskets and lubrication of canvas sliding side
guides (cabrio versions only)●●●●●●●●●●
Check handbrake lever travel and adjust, if necessary●●●●●
Visually inspect condition and wear of rear and front disc
brake pads and operation of pad wear indicator (for
versions/markets where provided)●●●●●●●●●●
Visually inspect conditions of the accessory drive belt(s)●
Check tensioning of accessory drive belt(s) and adjust if
necessary●●
Visually inspect condition of toothed timing drive belt●
Change engine oil and replace oil filter●●●●●●●●●●
Replace spark plugs (1)●●●●●
(1) The following are essential to ensure correct operation and prevent serious damage to the engine: only use spark plugs of the same make and type specially
certified for 1.4 Turbo petrol Abarth engines (see the information in the "Engine" paragraph); strictly comply with the spark plug replacement interval given in the
Scheduled Servicing Plan; for spark plug replacement it is advisable to contact an Abarth Dealership.
156
SERVICING AND MAINTENANCE

IMPORTANT
29) When topping up, take care not
to mix up the various types of
fluids: they are not compatible
with each other and could
seriously damage the car.
30) Do not add oil with specifications
other than those of the oil already
in the engine.
31) PARAFLU
UPanti-freeze is used
in the engine cooling system. Use
the same fluid as in the cooling
system when topping up.
PARAFLU
UPcannot be mixed with
any other type of fluid. If this
happens, do not start the engine
under any circumstances and
contact an Abarth Dealership.
32) Avoid allowing brake fluid, which
is extremely corrosive, to come
into contact with painted areas.
Should it happen, wash
immediately with water.
IMPORTANT
3) Used engine oil and oil filters
contain substances which are
harmful to the environment. You
are advised to go to an Abarth
Dealership to have the oil and
filters changed.
WARNING
130) Never smoke while working in
the engine compartment: gas
and flammable vapours may be
present, with the risk of fire.
131) Be very careful when working in
the engine compartment when
the engine is hot: you may get
burned. Remember that the fan
may start up if the engine is hot:
this could injure you. Scarves, ties
and other loose clothing may be
pulled by moving parts.132) The cooling system is
pressurised. If necessary, only
replace the cap with another
original one or the operation of
the system may be adversely
affected. Do not remove the
reservoir cap when the engine is
hot: risk of burns.
133) Do not travel with the
windscreen washer reservoir
empty: the windscreen washer is
essential for improving visibility.
Some commercial windscreen
washer additives are flammable.
The engine compartment contains
hot components which may set it
on fire.
134) Brake fluid is poisonous and
highly corrosive. In the event of
accidental contact, immediately
wash the affected parts with
water and mild soap. Then rinse
thoroughly. Call a doctor
immediately if swallowed.
135) The
symbol on the reservoir
identifies synthetic brake fluids,
distinguishing them from the
mineral type. Use of a mineral
type fluid will damage the special
rubber seals of the braking
system beyond repair.
161