How do I switch off the engine?
Park the vehicle an\f briefly press the START/STOP
ENGINE button to switch off the engine.
Pull the remote key out of the ignition slot.
01
How do I set/release the parking brake?01
Setting
Press firmly on the brake pe\fal.
Press the PUSH LOCK/PULL RELEASE control:
the symbol in the instrument panel flashes while the
parking brake is being applie\f an\f glows stea\fily
when it has been fully applie\f.
Release the brake pe\fal.
Releasing
Press firmly on the brake pe\fal.
Pull the PUSH LOCK/PULL RELEASE control.
How do I start the engine?
Hol\fing the en\f of the remote key with the base of
the key bla\fe, insert the remote key into the ignition
slot an\f press it in as far as possible.
Press the brake pe\fal.
Press the START/STOP ENGINE button briefly an\f
release it to start the engine.
01
See the a\f\fitional in\nformation on the last\n page of
this gui\fe.
How do I start the windshield/tailgate wipers
and rain sensor*?
Press the lever \fown to start the win\fshiel\f wipers or up
for the single-sweep function.
Rain sensor on\boff.
turn to a\fjust the rain sensor sensitivity or interval
wiper spee\f.
tailgate wiper – interval\bnormal.
01
What do BLIS * and CTA* do?02
Blind Spot Information System (BLIS) in\ficates the
presence of a fast approaching vehicle or a passing
vehicle in the \foor mirror’s blin\f area.
Cross Traffic Alert (CTA) \fetects vehicles crossing
behin\f your vehicle while you are backing up.
bLiS an\f ctA are activate\f when the engine is starte\f
an\f can be \feactivate\f\breactivate\n\f by pressing the but-
ton.
bLiS on\boff.
ctA on\boff – controlle\f by the same button as Park
Assist*.
See the warning on th\ne last page of this\n gui\fe.
How do I use the Start/Stop function*?
Stopping the engine
Press an\f hol\f the brake pe\fal until the vehicle stops.
Starting the engine
Release the brake pe\fal.
the in\ficator light in the button in\ficates that the function
is active.
02
