Selector lever position
The selector lever position is shown both on the side of the selector lever and in the instrument cluster display. The respective gear may also be shown in the instrument cluster display in Drive (D) and
Sport Drive (S), as well as in Tiptronic® mode ⇒ Shifting.
Hybrid drive information
The following information for the hybrid drive is shown in the instrument cluster display:
x Vehicle readiness indicator READY ⇒ Starting and stopping the engine.
x Full electro-mode drive indicator E-MODE ⇒ Information on the hybrid drive system.
x Information and warnings ⇒ Information on the hybrid drive system.
x Electrical driving performance display (E-Powermeter) ⇒ Information on the hybrid drive system.
x Display showing the energy flow between the drive unit (electric motor or combustion engine), the
drive wheels, and the high-voltage battery ⇒ Information on the hybrid drive system.
Engine identification code
Press and hold the /. /
To find the nearest qualified independent repair facility, locksmith, or Volkswagen dealer which can cut and code replacement vehicle keys, call the VW Customer Care Hotline at 1-800-822-8987 or visit http://www.vw.com and search for “replacement keys.”
Canadian customers can contact an authorized Volkswagen dealer or Volkswagen Service Facility or call the Volkswagen Canada Customer CARE Center at 1-800-822-8987.
NOTICE
The remote control vehicle keys contain electrical components. Protect them from damage, moisture and rough handling.
Do not press the buttons on the remote control vehicle key unless you actually want to use the function in question. Since terrain and conditions vary, pressing a button on the remote control vehicle key when it is not necessary may unlock the vehicle or set off the panic alarm, even if you think you are out of range.
Remote control vehicle key functions can be temporarily disrupted by interference from transmit-ters near the vehicle that use the same frequency range (such as radio equipment or mobile phones).
Things between the remote control vehicle key and vehicle, bad weather, as well as a weak battery can reduce the operating range.
If the remote control vehicle key buttons ⇒ fig. 17 or the power locking buttons ⇒ page 53, Un-locking or locking the vehicle from the inside are pushed repeatedly in quick succession, the power locking system is switched off for a brief period to help keep it from being overloaded. The vehicle is then unlocked for about 30 seconds. Unless a door or the luggage compartment lid is opened in this span of time, the vehicle is automatically locked afterwards.
Indicator light in the remote control vehicle key
Fig. 18 Indicator light in the remote control vehicle key.
A Declaration of Compliance with United States FCC and Industry Canada regulations is found in the
Consumer information section of this Manual ⇒ Consumer information.
Replacing the remote control vehicle key battery
Fig. 19 Remote control vehicle key: Open battery compartment cover.
Fig. 20 Remote control vehicle key: Remove old battery.