2015 VAUXHALL COMBO clock

134Vehicle careHalogen headlights
Headlights have separate systems forlow beam/sidelight 1 (outer bulb),
high beam/daytime running light 2
(inner bulb).
To access bulbs, pull off protective
covers.
Low beam 1. Remove protective cover.
2. Detach connector from bulb.
3. Disengage wire clip and remove bulb from reflector.
4.Insert new bulb in reflector so that
the locating tab of the bulb aligns
with the reflector recess.
5. Attach connector to bulb.
6. Engage wire clip.
7. Install protective cover.
High beam 1. Remove protective cover.
2. Detach connector from bulb.
3. Disengage wire clip and remove bulb from reflector.4.Insert new bulb in reflector so that
the bulb aligns with the reflector
recess.
5. Engage wire clip and attach connector onto bulb.
6. Install protective cover.
Sidelight 1. Remove protective cover. Withdraw bulb holder from
reflector by turning anticlockwise.

Vehicle care135
2. Remove bulb from socket, insertnew bulb.
3. Insert bulb holder in reflector. 4. Rotate clockwise to engage.
5. Install protective cover.
Daytime running light 1. Remove protective cover.2. Withdraw bulb holder from reflector by turning anticlockwise.
3. Remove bulb from socket, insert new bulb.
4. Insert bulb holder in reflector. 5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light 1. Remove protective cover.2. Withdraw bulb holder from reflector by turning anticlockwise.
3. Push bulb into holder slightly, rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector. 5. Rotate clockwise to engage.
6. Install protective cover.

136Vehicle careTail lights
1. Remove the three retainingscrews.
2. Remove light housing from vehicle.
3. Disengage connector plug from bulb holder.
4. Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal from light housing.
6. Push bulb into socket slightly, rotate anticlockwise, remove and
renew bulb.Brake light ( 1)
Turn signal light ( 2)
Tail light ( 3)
Tail light/fog light ( 4)
7. Install seal on bulb holder ensuring it is fitted correctly.
Install bulb holder in light housing
ensuring that it engages correctly.
Tighten the four retaining screws
using a screwdriver.
8. Install reverse light bulb holder and turn clockwise to tighten.
9. Engage connector plug.

Vehicle care137
10. Insert light housing in body,ensuring correct positioning.
Tighten the three retaining
screws.
11. Switch on ignition, operate and check all lights.
Side turn signal lights Have bulbs replaced by a workshop.
Centre high-mounted
brake light
Have bulbs replaced by a workshop.Number plate light
Tailgate
1. Insert screwdriver as indicated by
the arrows, press to the side and
release the bulb housing.
2. Turn the bulb holder anticlockwise
to remove from the bulb housing.
Remove the bulb by pulling.
3. Replace the bulb.
4. Insert bulb holder in bulb housing and rotate clockwise
5. Install the bulb housing ensuring it
engages correctly.

150Vehicle care
Notice
The driving characteristics of the repaired tyre are severely affected,therefore have this tyre replaced.
If unusual noise is heard or the
compressor becomes hot, turn
compressor off and allow to cool.
Note the expiry date of the kit. After
this date its sealing capability is no
longer guaranteed. Pay attention to
storage information on sealant
bottle.
Replace the used sealant bottle. Dispose of the bottle as prescribed
by applicable laws.
The compressor and sealant can be used from approx. -20 °C.
Replacing the sealant canister
To replace the sealant canister:
1. Disconnect the compressor air hose.
2. Turn the canister anticlockwise to lift it out.
3. Insert the new canister and turn it clockwise.
4. Connect the compressor air hose to the canister and fit the flexible
filler tube into its allocated space.
Wheel changing Some vehicles are equipped with a
tyre repair kit instead of a spare wheel 3 148.
Make the following preparations and
observe the following information:
■ Park the vehicle on a level, firm and
non-skid surface. The front wheels
must be in the straight-ahead
position.
■ Apply the parking brake and engage first or reverse gear.
■ Remove the spare wheel 3 152.
■ Never change more than one wheel
at once.
■ Use the jack only to change wheels
in case of puncture, not for
seasonal winter or summer tyre
change.
■ The jack is maintenance-free.
■ If the ground on which the vehicle is standing is soft, a solid board
(max. 1 cm thick) should be placed
under the jack.
■ No people or animals may be in the
vehicle when it is jacked-up.
■ Never crawl under a jacked-up vehicle.

177
Chimes......................................... 86
Cigarette lighter ........................... 67
Climate control ............................. 15
Climate control systems ...............96
Clock....................................... 64, 80
Control indicators.......................... 71
Control of the vehicle .................102
Controls ........................................ 62
Convex shape .............................. 27
Coolant and antifreeze ...............162
Cruise control ...................... 80, 117
Cupholders .................................. 54
D
Danger, Warnings and Cautions ...4
Date .............................................. 80
Daytime running lights ............80, 90
Declaration of conformity ............173
Diesel particle filter ...............77, 108
Distance to next service ...............80
Door locks..................................... 21
Door open .................................... 80
Doors ...................................... 23, 25
Drain fuel filter ............................. 79
Driver assistance systems ..........117
Driver Information Centre .............80
Driving characteristics and towing tips .............................. 124
Driving hints ................................ 102E
Eco mode (E).............................. 112
Electric adjustment ......................27
Electrical system......................... 139
Electronic climate control system 98
Electronic driving programmes ..112
Electronic Stability Program 76, 116
End-of-life vehicle recovery .......127
Engine compartment fuse box ...141
Engine coolant ........................... 129
Engine coolant temperature ........77
Engine coolant temperature gauge ....................................... 70
Engine data ............................... 166
Engine exhaust .......................... 108
Engine identification ...................165
Engine oil ................... 128, 162, 165
Engine oil pressure ......................78
ESP (Electronic Stability Program) ................................. 116
Event data recorders ..................173
Extendable load compartment cover ................................... 56, 60
Exterior care .............................. 158
Exterior light ................................. 80
Exterior lighting ......................12, 89
Exterior mirrors ............................. 27F
Fault ........................................... 113
Fixed air vents ........................... 101
Fog light ....................................... 80
Folding ......................................... 28
Folding seats ................................ 55
Front airbag system .....................44
Front fog lights ............................. 91
Front seats.................................... 33
Front turn signal light ..................134
Fuel............................................. 120
Fuel consumption .........................80
Fuel consumption - CO 2-
Emissions ............................... 123
Fuel cut-off system ...............86, 104
Fuel for diesel engines ..............120
Fuel for natural gas operation ...120
Fuel for petrol engines ...............120
Fuel gauge ................................... 68
Fuel selector ................................ 69
Fuel system messages .................86
Fuses ......................................... 139
G
Gauges ......................................... 67
General information ...................124
Generic warning ........................... 73
Glovebox ..................................... 54
Gross Vehicle Weight ...................60