2015 TOYOTA PRIUS PLUG-IN lights

[x] Cancel search: lights

Page 352 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 310
2-3. Operating the lights and windshield wipers
PRIUS PHV_OM_OM47A11U_(U)
■The rear window wiper and washer can be operated when
The “POWER” switch is in ON mode.
■If no washer fluid spray

Page 353 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 311
2-3. Operating the lights and windshield wipers
PRIUS PHV_OM_OM47A11U_(U)
2
When driving
NOTICE
■When the rear window is dry
Do not use the wiper, as it may damage the rear window.
■When the w

Page 354 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 312
2-3. Operating the lights and windshield wipers
PRIUS PHV_OM_OM47A11U_(U)
Headlight cleaner switch�
�
: If equipped
■The headlight cleaners can be operated when
The “POWER” switch is in ON

Page 370 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 328
2-4. Using other driving systems
PRIUS PHV_OM_OM47A11U_(U)
■Warning  lights,  messages  and  buzzers  for  dynamic  radar  cruise  con-
trol
Warning  lights,  warning  messages  and  buzzers  ar

Page 380 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 338
2-4. Using other driving systems
PRIUS PHV_OM_OM47A11U_(U)
Hill-start assist control
■Hill-start assist control operating conditions
●The system operates in the following situations:
•The sh

Page 386 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 344
2-4. Using other driving systems
PRIUS PHV_OM_OM47A11U_(U)
■Obstacles not detected
The sensor cannot detect plastic obstacles such as traffic cones. There may
also  be  occasions  when  the  sen

Page 398 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 356
2-5. Driving information
PRIUS PHV_OM_OM47A11U_(U)
■Before driving the vehicle
Perform the following according to the driving conditions:
●Do  not  try  to  forcibly  open  a  window  or  move

Page 419 of 728

TOYOTA PRIUS PLUG-IN 2015  Owners Manual 378
3-1. Using the air conditioning system and defogger
PRIUS PHV_OM_OM47A11U_(U)
■Operating conditions
The system will only operate if all of the following conditions are met:
●The shift position