2015 TOYOTA PRIUS PLUG-IN remote control

417
3-5. Other interior features
PRIUS PHV_OM_OM47A11U_(U)
3
Interior features
■Programming an entry gate (for U.S.A. owners)/Programming
a devices in the Canadian market
Place the remote control transmitter 1 to 3 in. (25 to 75 mm)
away from the HomeLink® buttons.
Keep the HomeLink® indicator light in view while programming.
Press and hold the selected HomeLink® button.
Repeatedly press and release (cycle) the remote control
transmitter for 2 seconds each until step 4 is completed.
When the HomeLink® indicator light starts to flash rapidly,
release the buttons.
Te s t t h e H o m e L i n k® operation by pressing the newly pro-
grammed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for any of
the remaining HomeLink® buttons.
■Programming other devices
To p r o g r a m o t h e r d e v i c e s s u c h as home security systems, home
door locks and lighting, contact your Toyota dealer for assistance.
■Reprogramming a button
The individual HomeLink® buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the “Reprogramming
a HomeLink® button” instructions.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6

419
3-5. Other interior features
PRIUS PHV_OM_OM47A11U_(U)
3
Interior features
■Before programming
●Install a new battery in the remote control transmitter.
●The battery side of the remote control transmitter must be pointed away
from the HomeLink® button.
■Certification for the garage door opener
For vehicles sold in the U.S.A. and Hawaii
For vehicles sold in Canada
■When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.

420
3-5. Other interior features
PRIUS PHV_OM_OM47A11U_(U)
CAUTION
■When programming a garage door or other remote control device
The garage door or other device may operate, so ensure people and objects
are out of danger to prevent potential harm.
■Conforming to federal safety standards
Do not use the HomeLink® compatible transceiver with any garage door
opener or device that lacks safety stop and reverse features as required by
federal safety standards.
This includes any garage door that cannot detect an interfering object. A
door or device without these features increases the risk of death or serious
injury.

478
4-3. Do-it-yourself maintenance
PRIUS PHV_OM_OM47A11U_(U)
■After charging/reconnecting the 12-volt battery
●Unlocking the doors using the smart key system may not be possible
immediately after reconnecting the 12-volt battery. If this happens, use
the wireless remote control or the mechanical key to lock/unlock the
doors.
●Start the hybrid system with the “POW ER” swi tch in ACC ESSORY mode.
The hybrid system may not start with the “POWER” switch turned off.
However, the hybrid system will operate normally from the second
attempt.
●The “POWER” switch mode is recorded by the vehicle. If the 12-volt bat-
tery is reconnected, the vehicle will return the “POWER” switch mode to
the status it was in before the 12-volt battery was disconnected. Make
sure to turn off the power before disconnect the 12-volt battery. Take
extra care when connecting the 12-volt battery if the “POWER” switch
mode prior to discharge is unknown.
●Restart the hybrid system, depress the brake pedal, and confirm that it is
possible to shift into each shift position.
If the system will not start even after multiple attempts at all methods above,
contact your Toyota dealer.

498
4-3. Do-it-yourself maintenance
PRIUS PHV_OM_OM47A11U_(U)
■Use a CR1632 lithium battery
●Batteries can be purchased at your Toyota dealer, local electrical appli-
ance shops or camera stores.
●Replace only with the same or equivalent type recommended by the
manufacturer.
●Dispose of used batteries according to local laws.
■If the electronic key battery is depleted
The following symptoms may occur:
●The smart key system and wireless remote control will not function prop-
erly.
●The operational range will be reduced.
CAUTION
■Removed battery and other parts
These parts are small and if swallowed by a child, they can cause choking.
Keep away from children. Failure to do so could result in death or serious
injury.
NOTICE
■For normal operation after replacing the battery
Observe the following precautions to prevent accidents:
●Always work with dry hands.
Moisture may cause the battery to rust.
●Do not touch or move any other component inside the remote control.
●Do not bend either of the battery terminals.

648
6-2. Customization
PRIUS PHV_OM_OM47A11U_(U)
ItemFunctionDefault
setting
Custom-
ized
setting
Smart key
system
(oP. 1 1 3 )
Smart key
systemON OFF O O O
Select doors to
unlock
Driver’s
doorAll doors O O O
Wireless
remote
control
(oP. 1 3 6 )
Wireless remote
control ON OFF – – O
Unlocking
operation
Driver’s
door
unlocked in
1-step, all
doors
unlocked
in 2-step
All doors
unlocked
in 1-step
OOO
Panic function ON OFF – – O
Buzzer sounds
when pushing
with any
door not closed
ON OFF – – O

649
6-2. Customization
6
Vehicle specifications
PRIUS PHV_OM_OM47A11U_(U)
ItemFunctionDefault
setting
Custom-
ized
setting
Smart key
system
(oP. 1 1 3 )
and wire-
less remote
control
(oP. 1 3 6 )
Operation
signals
(Emergency
flashers)
ON OFF – O O
Operation
signals
(Buzzers)
Level 7
Level 1 to 6
OOO
OFF
Time elapsed
before
automatic door
lock function is
activated if door
is not opened
after being
unlocked
60 seconds
OFF
–OO30
seconds
120
seconds

653
6-2. Customization
6
Vehicle specifications
PRIUS PHV_OM_OM47A11U_(U)
ItemFunctionDefault set-
ting
Custom-
ized
setting
Remote Air
Condition-
ing System
(oP. 3 7 7 )
Operation using
the “A/C” button
on the wireless
remote control
Push and
hold for 0.8
seconds
Push once
––O
Push twice
Push and
hold for 2.4
seconds
OFF
Stopping the
operation using
the “A/C” button
on the wireless
remote control
Push twice
Push once
––O
Push and
hold for 0.8
seconds
Push and
hold for 2.4
seconds
OFF