2015 TOYOTA AYGO light

77
2Instrument cluster
AYGO_EE_OM99J92E
2. Instrument cluster
Warning lights
and indicators .................... 78
Gauges and meters ............. 83
Multi-information display ...... 85

782. Instrument cluster
AYGO_EE_OM99J92E
War ning lights and indicators
XVehicles without a tachometer
XVehicles with a tachometer
The warning lights and indicators on the instrument cluster and
center panel inform the driver of the status of the vehicle’s vari-
ous systems.
For the purpose of explanation, the following illustration dis-
plays all warning lights and indicators illuminated.

792. Instrument cluster
2
Instrument cluster
AYGO_EE_OM99J92E
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1
Brake system warning
light ( →P. 352)
*2, 3, 4
(Yellow)
Speed limiter indicator
( →P. 354)
*1
Charging system
warning light ( →P. 352)
*2, 5
Speed limiter indicator
( →P. 354)
*1
Low engine oil pressure
warning light ( →P. 352)
*1, 2, 6
Stop & Start cancel
indicator ( →P. 354)
*1High engine coolant
temperature warning
light ( →P. 352, 353)
*1, 2
Slip indicator (→P. 355)
*1
“STOP” warning light
( →P. 353)
*2, 7
(Yellow)
Smart entry & start
system indicator light
( →P. 355, 359)
*1, 2Multi-mode manual
transmission
warning light ( →P. 353)
Open door warning light
( →P. 355)
*1
Malfunction indicator
lamp ( →P. 354)
*8Driver’s and front pas-
senger’s seat belt
reminder light ( →P. 355)
*1
SRS warning light
( →P. 354)
*2, 9
Rear passengers’ seat
belt reminder lights
( →P. 355)
*1
ABS warning light
( →P. 354)
Low fuel level warning
light ( →P. 355)
*1Electric power steering
system warning light
( →P. 354)
*1, 2
Tire pressure warning
light ( →P. 356)

802. Instrument cluster
AYGO_EE_OM99J92E
*1: These lights turn on when the engine switch is turned to the “ON” position
(vehicles without a smart entry & start system) or IGNITION ON mode
(vehicles with a smart entry & start system), to indicate that a system check
is being performed. They will turn off after the engine is started, or after a
few seconds. There may be a malfunction in a system if the lights do not
come on, or turn off. Have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional.
*2: If equipped
*3: The light comes in yellow to indicate a malfunction.
*4: For 1KR engine
*5: For HM01 engine
*6: The light flashes to indicate a malfunction.
*7: The light flashes in yellow to indicate a malfunction. The light flashes
quickly in green to indicate that the steering lock has not been released.
*8: Driver’s seat belt reminder light only, on some models
*9: This light illuminates on the center panel.
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
*1Gear Shift indicator
( →P. 161, 163)
*2Front fog light indicator
( →P. 171)
Turn signal indicator
( →P. 165)
Rear fog light indicator
( →P. 171)
*2
(Green)
Smart entry & start
system indicator light
( →P. 154)
*1, 2, 3
Slip indicator light
( →P. 192)
Tail light indicator
( →P. 167)
*1, 2
VSC off indicator
( →P. 192)
Headlight high beam
indicator ( →P. 168)
*2, 4
(Green)
Speed limiter indicator
light ( →P. 181)

812. Instrument cluster
2
Instrument cluster
AYGO_EE_OM99J92E
*1: These lights turn on when the engine switch is turned to the “ON” position
(vehicles without a smart entry & start system) or IGNITION ON mode
(vehicles with a smart entry & start system), to indicate that a system check
is being performed. They will turn off after the engine is started, or after a
few seconds. There may be a malfunction in a system if the lights do not
come on, or turn off. Have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional.
*2: If equipped
*3: The light flashes to indicate that the system is operating.
*4: For 1KR engine
*5: This light illuminates on the center panel.
*1, 2Stop & Start indicator
light ( →P. 185)
*1, 2“TRC OFF” indicator
( →P. 192)
*1, 2Stop & Start cancel
indicator ( →P. 186)
“PASSENGER AIR BAG” indicator
( →P. 45)
“PASSENGER AIR BAG” indicator
( →P. 45)
*1, 2, 5*1, 2, 5

822. Instrument cluster
AYGO_EE_OM99J92E
WARNING
■ If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional
immediately if this occurs.
NOTICE
■ To prevent damage to the engine and its components
The engine may be overheating if the high engine coolant temperature
warning light flashes or turns on. In this case, immediately stop the vehicle
in a safe place, and check the engine after it has cooled completely.
( →P. 398)

85
2
2. Instrument cluster
Instrument cluster
AYGO_EE_OM99J92E
Multi-information display
The multi-information display presents the driver with a variety of driv-
ing-related data including the current outside air temperature.
● Outside temperature display
( →P. 279)
● Trip information (→P. 85)
Displays driving range, fuel con-
sumption and other cruising related
information
● Instrument cluster light control
( →P. 8 8 )
● Shift position (vehicles with a multi-mode manual transmission)
Displays the selected shift position (→P. 159)
●Speed limiter display (if equipped) (→P. 181)
■Switching the display
Items displayed can be
switched by pushing one of the
“DISP” buttons.
Forward
Backward
■Odometer
Displays the total distance the vehicle has been driven.
■Trip meters “A” and “B”
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters “A” and “B” can be used to record and
display different distances independently.
Push and holding one of the “DISP” buttons will reset the trip meter that
is currently displayed.
Display contents
Trip information
1
2

872. Instrument cluster
2
Instrument cluster
AYGO_EE_OM99J92E
■Driving range
Displays the estimated approximate distance that can be driven
with the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
• The display shows “Lo FUEL” when the remaining is very low.
■Average vehicle speed
Displays the average vehicle speed since the function was reset.
The function can be reset by pushing one of the “DISP” button for longer
than 1 second when the average vehicle speed is displayed.
■Instrument cluster light control
Displays the instrument cluster light control display.
• This screen is only displayed when the tail lights are on.
• The brightness of the instrument cluster light can be adjusted. ( →P. 88)
The automatically displayed function of the Stop & Start system oper-
ation time can be activated or deactivated.
Push one of the “DISP” buttons and the Stop & Start system opera-
tion time is displayed, while the vehicle is stopped.
Push and hold the “DISP” buttons for 5 seconds.
Push the “DISP” buttons to
switch activate or deactivate.
Activated
Deactivated
The screen will change back to the
previous screen after 6 seconds or
by push and holding one of the
“DISP” buttons for 2 seconds.
Stop & Start system operation time customization (if equipped)
1
2
3
1
2