135
BEL BELBEL BEL
BEL
T T T T
T
TENSION TENSIONTENSION TENSION
TENSIONM A I N T E N A N C E
B BB B
B
elt elt elt elt
elt
T TT T
T
ension : ension :ension : ension :
ension :
Check the conditions of belts on the engine. Examine the edge of
the belt for cracks or fraying.
Check the tension of the belt by pushing on it with your thumb for
Alternator belt and A.C. compressor belt and Power Steering belt
as shown in schematic diagram.
The belts should have deflection of 4 to 6 mm.
If the belt tension is not proper, get it attended at the nearest
authorised service outlet.
Correct tension of the belt is very critical from belt life and belt
noise point of view. It is recommended that belt tension should be
measured with clavis gauge to ensure recommended values as given
below
Alternator / power steering belt Alternator / power steering beltAlternator / power steering belt Alternator / power steering belt
Alternator / power steering belt
•Frequency should be 250 + / - 10HZ for new belt measured
between alternator & power steering pump span.
•New belt to be retensioned to 220 + /- 10 HZ on vehicle
after running for 15 min.
F FF F
F
or c or cor c or c
or c
ompr omprompr ompr
ompr
essor b essor bessor b essor b
essor b
elt eltelt elt
elt
Span AC to dampers
•Frequency should be 200 +/- 10 HZ
•Belt to be retension to 180 +/- 10HZ on vehicle after
running for 15 min.
Alternator / Power Steering Belt Arrangement Alternator / Power Steering Belt ArrangementAlternator / Power Steering Belt Arrangement Alternator / Power Steering Belt Arrangement
Alternator / Power Steering Belt Arrangement
A.C. Compressor Belt Arrangement A.C. Compressor Belt ArrangementA.C. Compressor Belt Arrangement A.C. Compressor Belt Arrangement
A.C. Compressor Belt Arrangement
ProCarManuals.com
