CAUTION!
Do not use chemical flushes in your engine oil as the
chemicals can damage your engine. Such damage is
not covered by the New Vehicle Limited Warranty.
Engine Oil Viscosity — 3.6L Engine
MOPAR® SAE 5W-20 engine oil approved to FCA US
Material Standard MS-6395 such as Pennzoil®, Shell
Helix® or equivalent is recommended for all operating
temperatures. This engine oil improves low temperature
starting and vehicle fuel economy.
The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on
engine oil filler cap location, refer to the “Engine Com-
partment” illustration in this section.NOTE:
MOPAR® SAE 5W-30 engine oil approved to
FCA US Material Standard MS-6395 such as Pennzoil®,
Shell Helix® or equivalent may be used when SAE 5W-20
engine oil meeting MS-6395 is not available.
Synthetic Engine Oils
You may use synthetic engine oils provided the recom-
mended oil quality requirements are met, and the recom-
mended maintenance intervals for oil and filter changes
are followed.
Materials Added To Engine Oil
The manufacturer strongly recommends against the ad-
dition of any additives (other than leak detection dyes) to
the engine oil. Engine oil is an engineered product and its
performance may be impaired by supplemental addi-
tives.
336 MAINTAINING YOUR VEHICLE
Engine Oil Disposal.....................337
Flashers Hazard Warning ........................287
Turn Signal ........................ .67, 128
Flooded Engine Starting ....................201
Fluid Capacities ..........................382
Fluid Leaks ..............................68
Fluid Level Checks Automatic Transmission ..................354
Brake ............................... .352
Cooling System ........................ .346
Power Steering ........................ .218
Fluids, Lubricants And Genuine Parts ...........383
Fog Lights ............................93, 128
Four-Way Hazard Flasher ...................287
Freeing A Stuck Vehicle .....................323
Fuel .................................. .262
Adding ............................. .266
Additives ............................ .264Clean Air
............................ .262
Ethanol ............................. .263
Filler Cap (Gas Cap) .....................266
Gasoline ............................. .262
Gauge ...............................128
Light ............................... .128
Materials Added ........................264
Methanol ............................ .263
Octane Rating ..................... .262, 383
Requirements .......................262, 382
Tank Capacity ..........................382
Fueling ............................... .266
Fuses ................................. .362
Gas Cap (Fuel Filler Cap) .............266, 268, 330
Gasoline, Clean Air ........................262
Gasoline (Fuel) .......................... .262
Gasoline, Reformulated .....................262
10
INDEX 411
