2015 Ram ProMaster City mirror controls

Manual Outside Mirror Adjustment — If Equipped
From the inside of the vehicle, use the control lever to
adjust the mirror.
Power Outside Mirrors — If Equipped
The power mirror controls are located on the mirror flag
trim above the driver ’s door trim panel. To adjust a
mirror, turn the control knob toward the left or right
mirror positions indicated. Tilt the control wand in the
direction you want the mirror to move. When you are
finished adjusting the mirror, turn the control to the
center (neutral) position to prevent accidentally moving a
mirror.
Manual Mirror Control Lever
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Sun Visors
The driver and passenger sun visors are located on the
headliner, near the front windshield. The sun visor can be
rotated downward or up against the door glass. Your
vehicle may be equipped with courtesy mirror located on
the passenger sun visor.
Power Mirror Controls
1 — Driver Mirror Select Position
2 — Neutral Position
3 — Passenger Mirror Select Position
4 — Four-Way Mirror Control Switch
Sun Visor (Passenger Side Shown)
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97

STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts.
WARNING!
•Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Chil-
dren should be warned not to touch the parking
brake, brake pedal or the transmission gear selec-
tor.
• Do not leave the Key Fob in or near the vehicle (or
in a location accessible to children). A child could
operate power windows, other controls, or move
the vehicle.
Automatic Transmission
The shift lever must be in the PARK or NEUTRAL
position before you can start the engine. Apply the brakes
before shifting to any driving gear.
NOTE: You must press the brake pedal before shifting
out of PARK.
Normal Starting
NOTE: Normal starting of either a cold or a warm
engine is obtained without pumping or pressing the
accelerator pedal.
Turn the ignition switch to the AVV/ACC (START)
position and release it when the engine starts. If the
engine fails to start within 10 seconds, turn the ignition
switch to the STOP (OFF/LOCK) position, wait 10 to 15
seconds, then repeat the “Normal Starting” procedure.
5
STARTING AND OPERATING 199

Speedometer......................... .147
Tachometer ........................... .147
Gear Ranges ............................ .206
Gear Select Lever Override ..................321
General Information ....................180, 260
Glass Cleaning .......................... .358
Gross Axle Weight Rating ................267, 270
Gross Vehicle Weight Rating ..............267, 270
Guide, Body Builders ........................6
GVWR ................................ .267
Hazard Driving Through Flowing, Rising, or Shallow
Standing Water ........................ .214
Hazard Warning Flasher ....................287
Headlights ..............................110
Cleaning ............................ .358
Passing ..............................111
Head Restraints ......................... .103Heated Mirrors
.......................... .140
Heated Seats ............................ .102
Heater, Engine Block ...................... .201
Hill Start Assist .......................... .223
Hitches Trailer Towing ........................ .273
Holder, Cup ............................ .135
Hood Release ........................... .107
Ignition .................................12
Key..................................12
Ignition Key Removal .......................12
Immobilizer (Sentry Key) ....................14
Inside Rearview Mirror ......................94
Instrument Cluster .....................146, 147
Instrument Panel and Controls ................145
Instrument Panel Cover .....................357
Instrument Panel Lens Cleaning ...............359
Interior Appearance Care ....................357
402 INDEX