2015 Peugeot Partner Tepee lock

74
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
REAR SEATS (5 SEAT VERSION)Head restraint
High position: lift and raise the head
restraint.
Low position: press on the head
restraint to lower it.
to remove the head restraint, after
raising it press the tab and lift the head
restraint.
to install the head restraint, engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.
e

ach seat can be removed individually.
e

ach time a seat is returned to the
sitting position or after removing then
refitting a seat, check that it is locked
on the floor securely.
t

he three independent rear seats
are fitted with "comma" shape head
restraints.
t

he back of the centre seat, folded
onto the seat cushion, has a shell
which serves as a table with cup
holder.
Seats

75
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Adjusting the angle of the seat back
- Operate the control and adjust the
angle of the seat back.
Placing the seat back in the
table position
- Pull the control to fold the seat back
onto the seat cushion.
Do not place hard or heavy objects
on the table.
t

hey could become
dangerous projectiles in the event of
sharp braking or impact.
Returning the seat back to the
sitting position
- Release the seat back by pulling the
control, then return it to its original
position.
When returning the seat back to the sitting
position, ensure that it is locked securely.
Placing the seat in the fully
folded position
- Pull the control to place the seat
back in the table position.
-

Raise the bar located behind the
seat to release the rear anchoring
points.
-

t
ilt the entire seat forwards, until it
locks.
Returning the seat to its original
position
- Push the red control.
-
Fold back the seat to fix the rear
anchoring points.
-


Raise the seat back by pullin
g the
control.
Check that the entire seat is anchored
securely.
Seats
eASe OF uSe and COMFORt
4

76
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Removing the seat
- If necessary, move the front
seats forward and lower the head
restraint.
-

Place the seat in the fully folded
position.
Good practice
Following the various operations:
-
do not remove a head restraint
without storing it and fix it to a
support,
-


ensure that the passengers can
always access the seat belts and
fasten them easily

,
-

passengers must never take
their seat without adjusting and
fastening their seat belt.
Refer to the "fully folded position"
described on the previous page.
-


Press the red lever to release the
front feet.
-

t
ilt the entire seat rearwards by
approximately 45° without releasing
the lever

.
-

Release the lever

.
-

Lift the seat

vertically to the limit of
the anchorages.
-

Straighten the seat by tilting it
forwards then lift it.
Putting the seat back in place
- tilt the seat forward by 45°.
-
Place the hooks between the

two bars.
-

Fold back the seat to fix the rear
anchoring points.
-


Pull the control to return the seat
back to its initial position.
-


Raise the head restraint.
Check that no object is obstructing
the anchoring recesses or preventing
correct locking of the seats.
Seats

79
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Adjusting the angle of the seat back
-
Operate the control and adjust
the

angle.
Placing the seat in the table position
-

Lower the head restraint fully
.
-

Operate the control to fold the seat
back onto the seat cushion. Returning the seat back to the
sitting position
-


Release the seat back by pullin
g
the control, then return it to its
original position.
e
nsure that the entire seat is anchored
securely.
Placing the seat in the fully folded
position
-
Place the seat in the table position.
-


Pull the red strap, located behind
the seat, to release the feet of the
seat from their anchorage on the
floor

.
-
t
ilt the entire seat forwards.
Row 2 seat adjustmentsReturning the seat to its original
position
-
Fold back the entire seat.
Before folding the seat, ensure
that:
-


in row 3, no passenger's
foot is at one of the seat
anchorages on the floor

,
-

the seat is locked securely on
the floor

,
-

the seat belt is available for
the passenger

.
Seats
eASe OF uSe and COMFORt
4

80
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Row 3 seat adjustments
Placing the seat back in the table
position
-
Lower the head restraint fully
.
-

Operate the control to fold the seat
back onto the seat cushion.
Returning the seat back to the
sitting position
-


Release the seat back by pullin
g
the control, then return it to its
original position.
e

nsure that the entire seat is anchored
securely. Returning the seat to its original
position
-

Push the red control.
-


Fold back the entire seat.
Placing the seat in the fully folded
position
-


Place the seat in the table position.
-


Raise the bar fitted with a red
strap, located behind the seat, to
release feet of the seat from their
anchorage on the floor

.
-
t
ilt the entire seat forwards.e
nsure that:
-

the seat is locked securely on
the floor

,
-

the seat belt is available for
the passenger

.
Seats

82
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Removing the seat
-
If necessary
, move the front seats
forward.
-

Lower the head restraint.
-


Place the seat in the fully folded
position.
-

t
ilt the entire seat forwards then
lift

it. Repositioning the seat
t

he label on the seat indicates the
position in which it must be installed.
-

Place the hooks of the front feet
between the two bars.
-


Fold back the seat to fix the rear
anchoring points.
-


Operate the control to raise the
seat back to its initial position.
-


Raise the head restraint.
e nsure that no object or foot of
a passenger seated in the rear
is obstructing the anchoring
recesses or preventing correct
locking of the seat.
Handling the Row 2 seat
Seats

93
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Replacing a cartridge
The scented air freshener refill consists
of a cartridge B and its sealing case C.
-
Remove the protective film
D.
-

Place the head of the cartridge
B
on the button A of the scented air
freshener.
-
t
urn it a quarter of a turn to lock it
on the button and remove the case.
-


Insert the scented air freshener in
its location.
Y

ou can change the cartridges at any
time and store cartridges which have
already been started in their original
case.
t

he scented air freshener button A is
independent of the cartridge.
t

he cartridges are supplied without the
button A.
Inserting the scented air
freshener
After fitting or changing the cartridge:
-

Put the scented air freshener back
in place in its location.
-

t
urn it a quarter of a turn to the
right.
Good practice
As a safety precaution, only use the
cartridges provided for this purpose.
Do not dismantle the cartridges.
Keep the cartridge sealing cases
which are used as packaging when the
cartridges are not in use.
Never try to refill the cartridges
with fragrances other than those
recommended by the P
euge O t

network.
Keep out of reach of children and
animals.

Avoid contact with the skin
and eyes. If swallowed, consult a
doctor and show him the packaging or
product label.t
he scented air freshener button A can
only be fixed on the multifunction roof
console with a cartridge.
t

herefore, always retain button A and
a cartridge.
t

he cartridges are available from
P
euge
O
t
dealers.
Practical information
eASe OF uSe and COMFORt
4

96
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
Automatic switching on/off
t
he front courtesy lamp comes on
when the key is removed from the
ignition, when the vehicle is unlocked,
when one of the front doors is opened
and for location of the vehicle using the
remote control.
It goes off gradually after the ignition
is switched on and when the vehicle is
locked. Front seats: comes on when
one of the front doors is
opened.t
hese are switched on and off by
means of a manual switch, with
the ignition on.
Rear seats: comes on when
one of the rear doors is
opened.
If the doors remain open for
a few minutes, the courtesy
lamps go off.
Permanently off.
Permanently on, ignition on.
Front courtesy lamp
COURTESY LAMPS
Rear courtesy lamp
Front individual reading lamps
Practical information