2015 Peugeot iOn coolant

125
Ion_en_Chap09_verifications_ed01-2014
Rear compartmentLocated under the boot floor, this compartment gives access to the cooling system reservoir.
F
O
pen the boot.
F

D
etach the carpet retaining adhesive strip.
F

R
emove the boot carpet. F

R
emove the four "butter fly" screws.
F

R
emove the protective cover.F

C
heck the coolant level and top up if
necessary (see following pages).
When working in this compartment,
you must observe the safety
recommendations on the labels.
9
Checks

127
Ion_en_Chap09_verifications_ed01-2014
The coolant level should be between
the MIN "L" and MA X "F" marks.
Coolant levelAvoid prolonged contact of used fluids
with the skin.
Most of these fluids are harmful to
health and some are very corrosive.
Do not discard used fluids into sewers
or onto the ground.
Take used fluids to a PEUGEOT dealer
or a qualified workshop (France) or to
an authorised waste disposal site.
Used products
Rear compartment
Changing the coolant
The coolant does not have to be changed.
Coolant specification
The coolant must conform to the
manufacturer's recommendations. As the cooling system is pressurised, wait at
least one hour after switching off the motor
and/or the end of the charge cycle before
carrying out any work.
To avoid any risk of scalding, unscrew the cap
by two turns to allow the pressure to drop.
When the pressure has dropped, remove the
cap and top up the level.
Ancillaries battery
electrolyte level
Remove the battery protective cover to check
this level (refer to the "ancillaries battery"
section).
The electrolyte level should be between the
MIN "LOWER LEVEL" and MA X "UPPER
L E V E L" .
If necessary, top up using distilled water by
removing the individual battery caps.
Check the electrolyte level at least once
per month.
9
Checks

163
Ion_en_Chap12_recherche-visuelle_ed01-2014
Technical data - Maintenance
Front compartment 124
Checking levels 1 26-127
-
anc

illaries battery
electrolyte
-

b
rake fluid
-

h
eating system fluid
-

s
creenwash fluid
Chec ks


128
Changing front b u l b s
1

0 6 -111
Ancillaries battery
9

3-96 Opening the bonnet

1
23
Electric motor

1
29Weights


13 0
Rear compartment
1

25
Checking the coolant level


127
Front compartment f u s e s
11

4 , 117-118 Dimensions


131
Identification markings
1

32
.
Visual search