Page 39 of 276
 37
StEErInG WHEEL AdjuStMEnt
With the vehicle stationary, first adjust your 
seat to the most suitable position.
Release the steering wheel adjustment 
mechanism by pulling the lever towards you.
Adjust the reach of the steering wheel, then 
lock the mechanism by pushing the lever 
fully forwards.
operation
the information appears in the 
instrument panel screen in the 
form of the SHIF
t indicator
, 
accompanied by an upward arrow 
to signal to the driver that they can change up.
the system adapts its gear change
 
recommendations according to the driving 
conditions (slope, load,
 ...) and demands
 
from the driver (for power, acceleration, 
braking,
 ...).
Switching off
this system cannot be deactivated by the 
driver.
As a safety measure, these operations
 
must not be carried out while driving. 
2
rEAdY to SEt oFF
Gearbox and steering wheel  
     
        
        Page 68 of 276
 66
Activation/deactivation
this control, located on the 
control panel at the right-hand 
end of the dashboard, enables
 
you to activate/deactivate the 
operation of the rear controls from the 
driver's seat.
the first press activates (LeD on).
A
 second press deactivates (L
eD of
 f).
to deactivate the blower, place the control in
  
position 0. However, a safety device will ventilate the 
rear circuit automatically, even if the control 
is in position 0, to prevent the formation of 
condensation.
Air flow
comfort value adjustment
- on the blue, produces cool 
air
,
-
 on the red, produces heating 
of the ambient air
.
the OFF control on the "Mono-zone" central
 
control panel switches the function off. Control positioned:
the force of the blown air
, via 
the vents, varies from 1 to the 
strongest 4.
to obtain a comfortable level of 
ambient air
, remember to adjust 
this control. 
Ventilation  
     
        
        Page 108 of 276

 106
cAB SEAt BELtS
If you install a front bench seat as 
an accessory, it it must be fitted with 
approved seat belts.
Fastening
Pull the strap in front of you with an even 
movement, ensuring that it does not twist.
engage the tongue in its buckle.
Check that the seat belt is fastened securely
 
and that the automatic locking system is 
operating correctly by pulling the strap 
rapidly.
unfastening
Press the red button on the buckle, the 
seat belt reels in automatically but you are 
advised to guide it.
As a safety measure, these operations 
should not be carried out while the 
vehicle is moving.
driver's seat belt not 
fastened warning lamp
If the driver's seat belt is unfastened, 
S
tARt mode of Stop & Start will not be 
invoked. 
engine restarting is only possible
 
with the ignition key. When the vehicle is started, this warning 
lamp comes on, accompanied by an 
increasing audible signal, if the driver has 
not fastened their seat belt.
the driver's seat is fitted with a pyrotechnic
 
pretensioner and a force limiter.
On versions with a passenger's front airbag, 
the passenger's seat is also fitted with a 
pyrotechnic pretensioner and a force limiter.
the front bench seat is fitted with two seat
 
belts.
Height adjustment
For the driver or outer passenger seat, 
squeeze the control at the adjustable top 
mounting, slide the assembly, then release 
at the desired position to lock it.
the height of the seat belt for the centre
 
seat cannot be adjusted. 
Seat belts