2015 NISSAN XTERRA stop start

[x] Cancel search: stop start

Page 253 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual ●The low tire pressure warning light does not
automatically turn off when the tire pressure
of your tires are adjusted. After the tires are
inflated to the recommended pressure, the
vehicle must be

Page 255 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual AVOIDING COLLISION AND
ROLLOVER
WARNING
Failure to operate this vehicle in a safe
and prudent manner may result in loss of
control or an accident.
Be alert and drive defensively at all times. Obey
all

Page 256 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual WARNING
The following actions can increase the
chance of losing control of the vehicle if
there is a sudden loss of tire air pressure.
Losing control of the vehicle may cause a
collision and result in

Page 262 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual 4. Allow the engine to idle for at least 30 sec-onds after starting. Do not race the engine
while warming it up. Drive at moderate
speed for a short distance first, especially in
cold weather.
NOTE:
C

Page 263 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual The automatic transmission is designed so
the foot brake pedal MUST be depressed
before shifting from P (Park) to any drive
position while the ignition switch is in the
ON position.
The shift lever ca

Page 264 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual brake. When parking on a hill, apply the parking
brake first, then move the shift lever into the P
(Park) position.
R (Reverse):
CAUTION
To prevent transmission damage, use the
P (Park) or R (Reverse)

Page 265 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual Shift lock release
If the battery is discharged, the shift lever may not
be moved from the P (Park) position even with the
brake pedal depressed.
To move the shift lever, release the shift lock. The
s

Page 266 of 396

NISSAN XTERRA 2015 N50 / 2.G Owners Manual Overdrive (O/D) OFF switch
Each time your vehicle is started, the transmis-
sion is automatically “reset” to overdrive ON.
ON: With the engine running and theshift lever in the D (Drive) position,