2015 NISSAN LEAF display

19
TRIP COMPUTER
The Trip Computer 1 is located in the vehicle
information display.
With the power switch in the ON position, trip
computer modes can be selected by pressing
the
button 2 on the left side of the
instrument panel.
The following modes can be selected in
the display:
• T

o 100% Charge – Displays the estimated
time to a full Li-ion charge by using either 120
volts or 240 volts.
• Energy Economy

– Displays the average and
instant energy economy.



•

A
verage Speed – Displays the average
vehicle speed since the last reset.
• Driving Distance and Elapsed T

ime – Displays the total distance the vehicle has
been driven and the time since the last reset.
•

SOC% – Displays the vehicle’s current state of charge.
• Settings

– Allows you to adjust the system settings for features such as the clock,
reminders or preferences for alerts, maintenance intervals and language \
displays.



· Press the button
3 to cycle through the various setting modes.



· Press the button
2 to choose the selected mode.



•


W

arning – Displays when a warning message is present.
To reset Average Energy Economy, Average Speed, Driving Distance and Elapsed Time, go to that mode on the trip computer and hold the
button 3 for longer
than 1 second.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
32
1
SYSTEM GUIDE
1789594_15b_Leaf_QRG_063014.indd 196/30/14 1:29 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

22
BLUETOOTH® SYSTEM*
WITH NAVIGATION (if so equipped)
Bluetooth® Streaming Audio allows you to use a
compatible Bluetooth® phone to play audio files on
your device. Your compatible cellular phone can be
connected to the vehicle’s audio system, allowing
audio files to play through the vehicle’s speakers.
PAIRING PROCEDURE
Make sure the vehicle is st ationary when pairing
the phone.



1.
Press the
button 1 and select the
“Pair Phone” key.



2.


Initiate pairing from the phone.




•


T

he pairing procedure varies
according to each cellular phone
model. For detailed pairing instructions
and a list of compatible phones, please
visit www.nissanusa.com/bluetooth.



•


W

hen prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by NISSAN and cannot be changed.)



3.


W

hen the pairing is complete, the screen will
return to the “Phone” menu display.
MAKING A CALL
To make a call, follow this procedure:
1.


Press the
button 1 on the steering wheel.
The “Phone” menu will appear on the control
panel display.
2.


Select the “Handset Phonebook”, “V
ehicle
Phonebook”, “Call History” or “Dial Number” key.
3.


Select the desired entry from the list.
4.


Select “Call” to st

art dialing the number.
SYSTEM GUIDE
RECEIVING/ENDING A CALL
When you receive a phone call, a ring tone sounds through the audio syste\
m.
To accept the call, press the button.
To reject the call, press the button.
To hang-up the phone at the end of a call or to disconnect during call pl\
acement,
press the
button.
For more information, refer to the “Heater, air conditioner, audio and phone systems (section 4)” of your Owner’s
Manual or please visit www.nissanusa.com/bluetooth.
1
1789594_15b_Leaf_QRG_063014.indd 226/30/14 1:29 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

24
SYSTEM GUIDE
NAVIGATION SYSTEM (if so equipped)
1 MAP/VOICE Button – Press to view your current location on the map screen. When
you press and hold, the system will repeat voice guidance.
2 MENU Button – Press to view a list of menus.
Destination
– Touch to enter a destination or press the button and when
prompted say “Navigation” then follow the commands to enter a destination.
Route – Touch to access guidance control functions such as guidance
cancellation, route priority or waypoint setting on the route.
Info – Touch to display the vehicle’s energy information, maintenance and charging
station information, current location, traffic information, Voice Recognition command
list, GPS position and navigation version.
Settings – Touch to customize the system to make it easier for you to use.

Phone – Touch to set useful functions for the Bluetooth® Hands-free
Phone System.
CARWINGS – Touch to display information feeds. Settings for CARWINGS™ can
also be performed.
For more information, refer to your Navigation System Owner’s Manual.
1
2
1789594_15b_Leaf_QRG_063014.indd 246/30/14 1:29 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.