
9
   •  If plugging in the EV SE connector to a power 
outlet, attach a string to the control box  and 
hang it on a hook near the outlet or set it on a 
suitable surface  
7 off the ground.
    To stop charging:
 
 
• 
  
Press the button 8 on the charge connector 
to release the lock and remove the charge 
connector from the charge port.
  • 
 
Close the c
harge port cap and the charge port lid.
 
 
• 
 
Remove the EV
SE plug from the power outlet, 
attach the safety cap to the charge connector and store in the case.
QUICK CHARGE (if so equipped)
    Perform a quick charge by connecting the charge connector of a quick charger at a  charge station to the vehicle. 
    It takes approximately 30 minutes to charge the Li-ion battery to 80% when the low battery charge warning light illuminates.
    To charge your vehicle:
 
 
• 
  
Place the power switc
 h in the OFF position.
 
 
• 
  
Open the c
 harge port lid by pushing the charge 
port lid opener switch located on the instrument 
panel to the left of the steering wheel and 
unlatch the charge port cap  
9.
 
 
• 
 
Align the groove of the c
harge connector with 
the groove of the charge port then insert the 
charge connector.
 
 
• 
 
Grasp the loc
k lever and then lock the charge connector.
 
 
• 
 
F
ollow the instructions on the quick charge equipment to start charging. When the 
equipment is properly installed and ready to charge, a beep sounds twice and the 
charging status indicator light will change.
    To stop charging:
 
 
• 
  
F
 ollow the instructions on the quick charge equipment.
 
 
• 
  
Unloc
 k the charge connector and remove it from the vehicle.
 
 
• 
  
After closing the c
 harge port cap, close the charge port lid.
For more information, refer to the “EV overview (section EV)” and the “Charging (section CH)”\
 of your  
Owner’s Manual.
9
7
1789594_15b_Leaf_QRG_063014.indd   96/30/14   1:28 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  

21
   4.   Initiate connecting from the phone:
 
   
• 
  
T
 he connecting procedure varies according to each cellular phone model.  
For detailed connecting instructions and compatible phones, please visit 
www.nissanusa.com/bluetooth.
 
   
• 
  
W
 hen prompted for a PIN code, enter “1234” from the handset. (The PIN code is 
assigned by NISSAN and cannot be changed.) 
 
 
5.
    
S
 ay a name for the phone when the system asks you to provide one. You can give 
the phone a name of your choice.
PHONEBOOK SETUP
  The phonebook stores up to 1,000 entries for each phone paired with the system.
    Depending on your cellular phone, the system may automatically download \
your 
cellular phone’ s entire phonebook to the vehicle’s Bluetooth® system. 
  If the phonebook does not download automatically , entries can be individually downloaded.
  To manually download entries: 
 
 
1.
  
Push the   button on the steering wheel.  
 2.
 After the tone, s ay “Phonebook”. 
 
 
3.
   
After the next tone, s
 ay “Transfer Entry”. The system acknowledges the command 
and asks you to initiate the transfer from the phone handset. The new contact 
phone number will be transferred from the cellular phone to the vehicle.\
 
   
• 
 
T
he transfer procedure varies according to each cellular phone. See 
your cellular phone’s Owner’s Manual for details. You can also visit 
www.nissanusa.com/bluetooth for instructions on transferring phone numbers 
from NISSAN-recommended cellular phones.
 
 
4.
   
T
he system repeats the number and prompts you for the next command. When you 
have finished entering numbers or transferring an entry, choose “Store”.
 
 
5.
 
T
he system confirms the name, location and number.
MAKING A CALL FROM THE PHONEBOOK
  In some cases, names stored using all U PPERCASE letters may not be recognized by  
 
 
the V
 oice Recognition system.
 
 
1.
  
Press the   button.  
 2.
 After waiting for the tone, s ay “Call”. 
 
 
3.
   
After the next tone, speak the name of a phonebook entry
 . For example,  
“Michael Smith”.
 
 
4.
 
Once you have confirmed the name and location, the system begins the c\
all.
MAK
ING A CALL BY PHONE NUMBER
 1.
 
Press the   button. A tone will sound.  2.
   S
ay: “Call”. The system acknowledges the command and announces the next set of 
available commands.
 3.
   
S
ay: “Phone Number”. The system acknowledges the command and announces the 
next set of available commands.
 4.
 
S
ay the number you wish to call starting with the area code in single digit format.
 5.
   
W
hen you have finished speaking the phone number, the system repeats it back and 
announces the available commands.
 6. 
 
S
ay: “Dial”. The system acknowledges the command and makes the call.
1789594_15b_Leaf_QRG_063014.indd   216/30/14   1:29 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  

22
BLUETOOTH® SYSTEM*  
WITH NAVIGATION (if so equipped)
    Bluetooth® Streaming Audio allows you to use a 
compatible Bluetooth® phone to play audio files on 
your device. Your compatible cellular phone can be 
connected to the vehicle’s audio system, allowing 
audio files to play through the vehicle’s speakers.
PAIRING PROCEDURE
    Make sure the vehicle is st ationary when pairing 
the phone.
 
 
1.
     Press  the 
 button  1 and select the  
“Pair Phone” key.
 
 
2. 
 
Initiate pairing from the phone.
  
 
   
• 
 
T
he pairing procedure varies  
according to each cellular phone  
model. For detailed pairing instructions  
and a list of compatible phones, please  
visit www.nissanusa.com/bluetooth.
 
   
• 
 
W
hen prompted for a PIN code, enter “1234” 
from the handset. (The PIN code is assigned 
by NISSAN and cannot be changed.) 
 
 
3.
   
W
hen the pairing is complete, the screen will 
return to the “Phone” menu display.
MAKING A CALL
To make a call, follow this procedure:
 1.
   
Press  the 
 button  1 on the steering wheel.  
The “Phone” menu will appear on the control  
panel display.
 2.
   
Select the “Handset Phonebook”, “V
 ehicle 
Phonebook”, “Call History” or “Dial Number” key.
 3.
 
Select the desired entry from the list. 
 4.
 
Select “Call” to st
art dialing the number. 
SYSTEM GUIDE
RECEIVING/ENDING A CALL
  When you receive a phone call, a ring tone sounds through the audio syste\
m.
  To accept the call, press the   button.
  To reject the call, press the  button.
    To hang-up the phone at the end of a call or to disconnect during call pl\
acement, 
press the 
 button.
For more information, refer to the “Heater, air conditioner, audio and phone systems (section 4)” of your Owner’s 
Manual or please visit www.nissanusa.com/bluetooth.
1
1789594_15b_Leaf_QRG_063014.indd   226/30/14   1:29 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.