2015 NISSAN JUKE oil temperature


> (GLW   0RGHO )'@
5-28
Starting anddriving
GUID-7C03 A534-EF0E- 40B7-84F0-1 3B8CB4EE473
Follow theseeasy-to-use FuelEfficient Driving
Tips tohelp youachieve themost fueleconomy
from yourvehicle.
1. Use smooth accelerator andbrake pedal
application.
.
Avoid rapidstarts andstops.
.
Use smooth, gentleaccelerator and
brake application wheneverpossible.
.
Maintain constant speedwhilecommut-
ing and coast whenever possible.
2. Maintain constant speed.
.
Look ahead totry and anticipate and
minimize stops.
.
Synchronizing yourspeed withtraffic
lights allows youtoreduce yournumber
of stops.
.
Maintaining asteady speedcanminimize
red light stops andimprove fueleffi-
ciency .
3. Use airconditioning (A/C)athigher vehicle
speeds.
.
Below 40MPH (64km/h) ,it is more
efficient toopen windows tocool the
vehicle duetoreduced engineload.
.
Above 40MPH (64km/h) ,it is more
efficient touse A/C tocool thevehicle
due toincreased aerodynamic drag.
.
Recirculating thecool airinthe cabin
when theA/C ison reduces coolingload.
4. Drive ateconomical speedsanddistances.
.
Observing thespeed limitandnotex-
ceeding 60MPH (97km/h) (where
legally allowed) canimprove fueleffi-
ciency duetoreduced aerodynamic
drag.
.
Maintaining asafe following distance
behind othervehicles reduces unneces-
sary braking.
.
Safely monitoring traffictoanticipate
changes inspeed permits reduced brak-
ing and smooth acceleration changes.
.
Select agear range suitable toroad
conditions.
5. Use cruise control.
.
Using cruise control duringhighway
driving helpsmaintain asteady speed.
.
Cruise control isparticularly effectivein
providing fuelsavings whendriving on
flat terrains.
6. Plan forthe shortest route.
.
Utilize amap ornavigation systemto
determine thebest route tosave time.
7. Avoid idling.
.
Shutting offyour engine whensafefor
stops exceeding 30-60seconds saves fuel
and reduces emissions.
8. Buy anautomated passfortoll roads.
.
Automated passespermitdrivers touse
special lanestomaintain cruisingspeed
through thetolland avoid stopping and
starting.
9. Winter warmup.
.
Limit idling timetominimize impacttofuel
economy .
.
V ehicles typically neednomore than30
seconds ofidling atstart-up toeffectively
circulate theengine oilbefore driving.
.
Y our vehicle willreach itsideal operating
temperature morequickly whiledriving
versus idling.
10. Keeping yourvehicle cool.
.
Park yourvehicle inacovered parking
area orinthe shade whenever possible.
.
When entering ahot vehicle, opening the
windows willhelp toreduce theinside
temperature faster,resulting inreduced
demand onyour A/Csystem.
FUEL EFFICIENT DRIVINGTIPS
&RQGLWLRQ


> (GLW   0RGHO )'@
A WD shift tips
GUID-C35 72DD7-028 5-47BA-B5AE -F412F28BC6E1
. Ifthe AWD mode switch isoperated while
making aturn, accelerating ordecelerating,
or ifthe ignition switchisturned offwhile in
the AWD-V orAWD mode, youmay feela
jolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously
operated underconditions wherethediffer-
ence inrotation between thefront andrear
wheels islarge (wheel slip),such aswhen
driving thevehicle onrough roadsthrough
sand ormud orwhen freeing astuck vehicle.
In these cases, theAWD warning lightblinks
rapidly andtheAWD mode changes tothe
2WD mode toprotect thepower trainparts.
If you stop driving withtheengine idlingand
wait until thewarning lightstops blinking,
the AWD returns tothe AWD-V orAWD
mode.
. Brake distance inthe AWD mode isthe
same as2WD.
CAUTION
. Do not start theengine withthe
AWD mode switch inany mode in
the following cases: Ð
when thevehicle isplaced ona
free-roller orjacking upthe
vehicle withthefront tires
raised andtherear tires onthe
ground.
Ð when towing thevehicle withthe
rear tires raised fromthe
ground.
. Operate theAWD mode switch only
when driving straight. Donot oper-
ate the AWD mode switch when
making aturn orbacking up.
. Do not operate theAWD mode
switch withthefront wheel spin-
ning.
. Engine idlingspeed ishigh while
warming upthe engine. Beespe-
cially careful whenstarting ordriv-
ing onslippery surfaces withthe
AWD mode switch setinthe AWD-V
or AWD mode.
SSD0336-D
A WD WARNING LIGHT
GUID-00 AD0D7B-4E5 0-437F-8A9D-C89C8757 711F
The AWD warning lightlocated inthe instrument
panel illuminates whentheignition switchis
placed inthe ON position. Itturns offsoon after
the engine isstarted.
If any malfunction occursinthe AWD system
while theengine isrunning, orwhile driving, the
Starting anddriving
5-31
&RQGLWLRQ


> (GLW   0RGHO )'@
5-32
Starting anddriving
warning lightwilleither remain illuminated or
blink.
High-temperature powertrainoildue tocon-
tinuous operation ofthe vehicle tofree astuck
vehicle makesthewarning lightblink rapidly
(about twicepersecond) .The driving modemay
change tothe 2WD mode. Ifthe warning light
blinks rapidly duringoperation, stopthevehicle
with theengine idlinginasafe place immedi-
ately .Then ifthe light goes offafter awhile, you
can continue driving.
A large difference betweenthediameters of
front andrear wheels willmake thewarning light
blink slowly (about onceper2seconds) .Pull off
the road inasafe area, andidletheengine.
Check thatalltire sizes arethesame, tire
pressure iscorrect andtires arenot worn.
Change theAWD mode switch tothe 2WD
mode anddonot drive fast.
CAUTION
. Ifthe warning lightilluminates while
driving, AWDmode willbechanged
to 2WD mode. Reduce thevehicle
speed andhave yourvehicle
checked byaNISSAN dealeras
soon aspossible. Beespecially
careful whendriving. .
The power trainmaybedamaged if
you continue drivingwiththeAWD
warning lightblinking rapidly.
&RQGLWLRQ


> (GLW   0RGHO )'@
7-4
Appeara nceand care
WHEELS
GUID-5C1 A4D98-FAA3-42C6- 9D60-F719F 6288D8C
W ash thewheels whenwashing thevehicle to
maintain theirappearance.
. Clean theinner sideofthe wheels whenthe
wheel ischanged orthe underside ofthe
vehicle iswashed.
. Inspect wheelrimsregularly fordents or
corrosion. Suchdamage maycause lossof
pressure orpoor sealatthe tirebead.
. NISSAN recommends thattheroad wheels
be waxed toprotect against roadsaltin
areas where itis used during winter.
CAUTION
Do not use abrasive cleanerswhen
washing thewheels.
ALUMINUM ALLOY WHEELS
GUID-36 5F7FE3-3E13 -4C96-BDAE-48FF7 C0361FE
W ash regularly withasponge dampened ina
mild soap solution, especially duringwinter
months inareas where roadsaltisused. Salt
could discolor thewheels ifnot removed.
CAUTION
Follow thedirections belowtoavoid
staining ordiscoloring thewheels:
. Do not use acleaner thatuses
strong acidoralkali contents to
clean thewheels.
. Do not apply wheel cleaners tothe
wheels whentheyarehot. The
wheel temperature shouldbethe
same asambient temperature.
. Rinse thewheel tocompletely re-
move thecleaner within15minutes
after thecleaner isapplied.
CHROME PARTS
GUID-5B B31808-6290 -4F98-9904-5 031603D6ACF
Clean chrome partsregularly withanon-
abrasive chromepolishtomaintain thefinish.
TIRE DRESSING
GUID-D8 2454BF-681 8-4F9A-BCAA -709BC7775C3D
NISSAN doesnotrecommend theuse oftire
dressings. Tiremanufacturers applyacoating to
the tires tohelp reduce discoloration ofthe
rubber. Ifa tire dressing isapplied tothe tires, it
may react withthecoating andform acom-
pound. Thiscompound maycome offthe tire
while driving andstain thevehicle paint.
If you choose touse atire dressing, takethe following
precautions:
. Use awater-based tiredressing. Thecoat-
ing onthe tiredissolves moreeasily withan
oil-based tiredressing.
. Apply alight coat oftire dressing tohelp
prevent itfrom entering thetire tread/
grooves (whereitwould bedifficult to
remove) .
. Wipe offexcess tiredressing usingadry
towel. Makesurethetire dressing is
completely removedfromthetiretread/
grooves.
. Allow thetiredressing todry asrecom-
mended bytire dressing manufacturer.
&RQGLWLRQ


> (GLW   0RGHO )'@
8-4
Maintenan ceand do-it-you rself
Windshield defroster:Checkthattheair
comes outofthe defroster outletsproperly and
in sufficient quantitywhenoperating theheater
or air conditioner.
Windshield wiperandwasher*: Checkthat
the wipers andwashers operateproperly and
that thewipers donot streak.
Under thehood andvehicle
GUID-597 AB0E2-6F94-48AA-BE D6-41A6FA4A8B49
The maintenance itemslistedhereshould be
checked periodically (forexample, eachtimeyou
check theengine oilorrefuel) .
Battery*: Checkthefluid level ineach cell.
It should bebetween theMAX andMIN lines.
V ehicles operated inhigh temperatures orunder
severe condition requirefrequent checksofthe
battery fluidlevel.
NO TE:
Care should betaken toavoid situations
that canlead topotential batterydischarge
and potential no-startconditions suchas:
1. Installation orextended useofelectro-
nic accessories thatconsume battery
power whentheengine isnot running
(Phone chargers, GPS,DVDplayers,
etc .)
2. Vehicle isnot driven regularly and/or
only driven shortdistances. In
these cases, thebattery mayneed tobe
charged tomaintain batteryhealth.
Brake andclutch fluidlevel*: Makesurethat
the brake andclutch fluidlevel isbetween the
MAX andMIN lines onthe reservoir.
Engine coolant level*:Checkthecoolant level
when theengine iscold.
Engine drivebelt*: Makesurethatthedrive
belt isnot frayed, worn,cracked oroily .
Engine oillevel*: Checkthelevel afterparking
the vehicle onalevel surface andturning offthe
engine. Wait more than10minutes forthe oilto
drain backintotheoilpan.
Exhaust system:Makesurethere arenoloose
supports, cracksorholes. Ifthe sound ofthe
exhaust seemsunusual orthere isasmell of
exhaust fumes,immediately havetheexhaust
system inspected byaNISSAN dealer.(See
ªPrecautions whenstarting anddrivingº (P.5-2)
for exhaust gas(carbon monoxide) .)
Fluid leaks: Checkunderthevehicle forfuel,
oil, water orother fluidleaks afterthevehicle has
been parked forawhile. Water dripping fromthe
air conditioner afteruseisnormal. Ifyou should
notice anyleaks orifgasoline fumesareevident,
check forthe cause andhave itcorrected
immediately . Radiator
andhoses: Checkthefront ofthe
radiator andclean offany dirt, insects, leaves,
etc., thatmay have accumulated. Makesurethe
hoses havenocracks, deformation, rotorloose
connections.
Underbody: Theunderbody isfrequently ex-
posed tocorrosive substances suchasthose
used onicy roads ortocontrol dust.Itis very
important toremove thesesubstances, other-
wise rustwillform onthe floor pan,frame, fuel
lines andaround theexhaust system.Atthe end
of winter, theunderbody shouldbethoroughly
flushed withplain water, beingcareful toclean
those areaswhere mudanddirtmay accumu-
late. Foradditional information, seeªCleaning
exteriorº (P.7-2) .
Windshield washerfluid*:Checkthatthere is
adequate fluidinthe reservoir.
&RQGLWLRQ


> (GLW   0RGHO )'@
8-8
Maintenan ceand do-it-you rself
SDI2641
CHECKING ENGINECOOLANT LEVEL
GUID-612 F80D4-E26B -4B93-AC08-C2B3435 F2A37
Check thecoolant levelinthe reservoir when
the engine iscold. Ifthe coolant levelisbelow
the MIN level
*
2
, open thereservoir capand
add coolant uptothe MAX level
*
1
. If the
reservoir isempty ,check thecoolant levelinthe
radiator whentheengine iscold. Ifthere is
insufficient coolantinthe radiator, fillthe radiator
with coolant uptothe filler opening andalso add
it to the reservoir uptothe MAX level
*
1
.
Tighten thecap securely afteradding engine
coolant.
If the cooling systemfrequently requires
coolant, haveitchecked byaNISSAN
dealer.
CHANGING ENGINECOOLANT
GUID-14 046F06-B9D 2-494E-86AE -EBEDB6F75409
Major cooling systemrepairsshouldbeper-
formed byaNISSAN dealer.Theservice
procedures canbefound inthe appropriate
NISSAN ServiceManual.
Improper servicingcanresult inreduced
heater performance andengine overheat-
ing.
WARNING
. To avoid thedanger ofbeing
scalded, neverchange thecoolant
when theengine ishot.
. Never remove theradiator capwhen
the engine ishot. Serious burns
could becaused byhigh pressure
fluid escaping fromtheradiator.
. Avoid directskincontact withused
coolant. Ifskin contact ismade,
wash thoroughly withsoap orhand
cleaner assoon aspossible.
. Keep coolant outofreach ofchil-
dren andpets.
Engine coolant mustbedisposed ofproperly .
Check yourlocal regulations.
GUID-F5 0C9ACC-24A4 -47A7-B339-C4E866AF0 9E4
SDI1993
CHECKING ENGINEOILLEVEL
GUID-C7FE 066F-37F5- 4EF6-866F-7 43A4D5CA8D6
1. Park thevehicle onalevel surface andapply
the parking brake.
2. Run theengine untilitreaches operating
temperature.
3. Turn offthe engine. Waitmore than10
minutes forthe oiltodrain backinto
the oilpan.
4. Remove thedipstick andwipe itclean.
Reinsert itall the way.
5. Remove thedipstick againandcheck theoil
level. Itshould bewithin therange
*
C
. If the
oil level isbelow
*
A
, remove theoilfiller
cap andpour recommended oilthrough the
ENGINE OIL
&RQGLWLRQ


> (GLW   0RGHO )'@
opening. Donot overfill
*
B
.
6. Recheck oillevel withthedipstick.
It is normal toadd some oilbetween oil
maintenance intervalsorduring thebreak -
in period, depending onthe severity of
operating conditions.
CAUTION
Oil level should bechecked regularly.
Operating theengine withaninsuffi-
cient amount ofoil can damage the
engine, andsuch damage isnot cov-
ered bythe warranty.
CHANGING ENGINEOILAND FILTER
GUID-14 29280C-216 4-4979-AB59-A82BB A48D3F2
Change theengine oiland filter according tothe
maintenance logshown inthe NISSAN Service
and Maintenance Guide.
V ehicle set-up
GUID-D33 812FA-0489-4509 -B0E6-6388A81BEBEA
1. Park thevehicle onalevel surface andapply
the parking brake.
2. Run theengine untilitreaches theoperating
temperature.
3. Turn theengine offand wait more than10
minutes. 4.
Raise andsupport thevehicle usinga
suitable floorjackandsafety jackstands.
.
Place thesafety jackstands underthe
vehicle jack-up points.
.
A suitable adaptershouldbeattached to
the jack stand saddle.
CAUTION
Make surethecorrect liftingandsup-
port points areused toavoid vehicle
damage.
SDI2652
For NISMO RS models
JVM0518X
Except forNISMO RSmodels
Maintena nceand do-it-yo urself
8-9
&RQGLWLRQ


> (GLW   0RGHO )'@
8-10
Maintenance anddo-it-yours elf
SDI2651
1. Oilfiller cap
2. Oildrain plug
3. Oilfilter
Engine oiland filter
GUID-0E3 F5EC9-066 C-4F79-BD C5-1BCF07 F45F7E
1. Place alarge drain panunder thedrain plug.
2. Remove theoilfiller cap.
3. Remove thedrain plugwithawrench and
completely draintheoil.
CAUTION
Be careful nottoburn yourself, asthe
engine oilishot.
.
Waste oilmust bedisposed of
properly.
.
Check yourlocal regulations.
(Perform steps4to 7only when theengine
oil filter change isneeded.)
4. Loosen theoilfilter withanoilfilter wrench.
Remove theoilfilter byturning itby hand.
5. Wipe theengine oilfilter mounting surface
with aclean rag.
CAUTION
Be sure toremove anyoldgasket
material remaining onthe mounting
surface ofthe engine. Failuretodo so
could leadtoengine damage.
6. Coat thegasket onthe new filter withclean
engine oil.
7. Screw inthe oilfilter clockwise untilaslight
resistance isfelt, then tighten additionally
more than2/3turn.
Oil filter tightening torque:
11 to15 ft-lb
(14.7 to20.5 N´m)
8. Clean andre-install thedrain plugwitha
new washer. Securely tightenthedrain plug
with awrench. Drain
plugtightening torque:
22 to29 ft-lb
(29 to39 N´m)
Do not use excessive force.
9. Refill theengine withtherecommended oil
through theoilfiller opening, andinstall the
oil filler capsecurely .
See ªCapacities andrecommended fluids/
lubricantsº (P.9-2) fordrain andrefill capa-
city .The drain andrefill capacity depends on
the oiltemperature anddrain time.Use
these specifications forreference only.Al-
ways usethedipstick todetermine the
proper amount ofoil inthe engine.
10. Start theengine andcheck forleakage
around thedrain plugandtheoilfilter.
Correct asrequired.
11. Turn theengine offand wait more than10
minutes. Checktheoillevel withthedipstick.
Add engine oilifnecessary .
After theoperation
GUID-02 E3EFF4-6A0C -4167-AC8B-E5E800B0 3EDA
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
&RQGLWLRQ