2015 NISSAN ARMADA fuse

[x] Cancel search: fuse

Page 416 of 510

NISSAN ARMADA 2015 1.G Owners Manual 8 Maintenance and do-it-yourself
Maintenance requirements..........................8-2
General maintenance ..............................8-2
Explanation of general maintenance items .........8-2
Maint

Page 422 of 510

NISSAN ARMADA 2015 1.G Owners Manual 1. Battery
2. Fuse/fusible link box
3. Engine oil filler cap
4. Brake fluid reservoir
5. Windshield-washer fluid reservoir
6. Air cleaner
7. Drive belt location
8. Radiator cap
9. Power steering fluid

Page 439 of 510

NISSAN ARMADA 2015 1.G Owners Manual If the brakes do not operate properly, have the
brakes checked by a NISSAN dealer.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting
brakes.
The front and rear disc-type brakes self-a

Page 440 of 510

NISSAN ARMADA 2015 1.G Owners Manual If a typeAfuse is used to replace a typeBfuse,
the type
Afuse will not be level with the fuse
pocket as shown in the illustration. This will not
affect the performance of the fuse. Make sure the
fu

Page 441 of 510

NISSAN ARMADA 2015 1.G Owners Manual 5. If the fuse is openA, replace it with a new
fuse
B.
6. If a new fuse also opens, have the electrical system checked and repaired. It is recom-
mended you visit a NISSAN dealer for this
service.Fu

Page 442 of 510

NISSAN ARMADA 2015 1.G Owners Manual 2. Open the glove box to access the fuse boxcover.
3. Pull the fuse box cover to remove.
4. Remove the fuse with the fuse puller.
5. If the fuse is open
A, replace it with an
equivalent good fuse
B.

Page 443 of 510

NISSAN ARMADA 2015 1.G Owners Manual Extended storage switch
If any electrical equipment does not operate,
remove the extended storage switch and check
for an open fuse.
NOTE:
The extended storage switch is used for
long term vehicle sto

Page 490 of 510

NISSAN ARMADA 2015 1.G Owners Manual 2. Apply the parking brake to access thejumper harness connector. 3. Locate the jumper harness connector under
the lower portion of the instrument panel.
The connector is taped to the wiring harness

Page:   < prev 1-8 9-16 17-24 next >